1. ምርት አብቅቷልview
The EPEVER Tracer4210AN-G3 is an advanced Maximum Power Point Tracking (MPPT) solar charge controller designed for off-grid solar systems. It efficiently manages power flow from solar panels to batteries, ensuring optimal charging and extending battery life. This model supports both 12V and 24V battery systems automatically and is compatible with various battery types, including lead-acid and lithium-ion.
This package includes the Tracer4210AN-G3 controller, an MT52 remote meter for monitoring and parameter setting, and a temperature sensor cable (RTS300R47K3.81A) for accurate temperature compensation.
2. ቁልፍ ባህሪያት
- እጅግ በጣም ፈጣን የመከታተያ ፍጥነት እና የተረጋገጠ የመከታተያ ቅልጥፍና።
- Advanced MPPT control algorithm to minimize maximum power point loss rate and loss time.
- Compatible with lead-acid (Sealed, Gel, Flooded, User) and lithium-ion (LiFePO4, Li(NiCoMn)O2, User) batteries.
- የተለመደው አሉታዊ የመሬት አቀማመጥ ንድፍ.
- Rated charge current: 40A.
- Max. PV input power: 520W (12V battery) / 1040W (24V battery).
- ማክስ. PV ክፍት የወረዳ ጥራዝtagሠ፡ 100VDC
- አውቶማቲክ 12V/24V የስርዓት መጠንtagሠ እውቅና.
- Auto-saving function with two voltage disconnect levels.
- Charging power and current limitation function.
- ገለልተኛ ጥራዝtage regulation constant voltagሠ ውፅዓት ተግባር.
- Battery temperature compensation function (for lead-acid batteries).
- Overheating power reduction function.
- MT52 Remote Meter for real-time data display, alarm information, and diversified load control modes.
3. የጥቅል ይዘቶች
የምርት እሽግ በተለምዶ የሚከተሉትን ነገሮች ያካትታል:
- 1 x Tracer4210AN-G3 MPPT Solar Charge Controller
- 1 x Remote Meter MT52
- 1 x Temperature Sensor Cable (RTS300R47K3.81A)
- 1 x RS485 ገመድ
- 2 x User Manuals (one for controller, one for MT52)
4. የመጫኛ መመሪያዎች
Always Connect the Battery First!
Please read the complete installation instructions to familiarize yourself with the installation steps before proceeding. Do not use electric screwdrivers for connections.
4.1. የሽቦ ንድፍ
The diagram above illustrates the typical system connection. Ensure all components are connected in the correct order to prevent damage.
4.2. የግንኙነት ደረጃዎች
- ባትሪ ማገናኘት; Connect the battery to the charge controller first. Ensure correct polarity (+ to + and - to -).
- የማገናኘት ጭነት፡ Connect the DC load to the charge controller.
- Connect Solar Panel (PV Array): Connect the solar panel to the charge controller last.
4.3. Disconnection Steps
To disconnect the system, reverse the connection order:
- Disconnect Solar Panel (PV Array): Disconnect the solar panel first.
- ጭነት አቋርጥ Disconnect the DC load.
- የባትሪውን ግንኙነት አቋርጥ፡ Disconnect the battery last.
4.4. Detailed Wiring
Ensure all wires are securely fastened in their respective terminals. The controller features terminals for Solar Panel (10mm²/8AWG), Battery (10mm²/8AWG), and Load (10mm²/8AWG).
4.5. Connecting Remote Meter (MT52)
The MT52 remote meter connects to the COM port on the charge controller using an RS485 cable. This allows for remote monitoring and parameter adjustments.
4.6. Connecting to PC for Monitoring
For advanced monitoring and parameter setting, the controller can be connected to a PC using a CC-USB-RS485-150U cable. This allows access to the EPEVER PC software for detailed system analysis.
5. የአሠራር መመሪያዎች
5.1. LCD Display Overview
The controller features an LCD display for real-time monitoring of system status and parameters. Use the 'SELECT' and 'ENTER' buttons to navigate through the menus.
5.2. የባትሪ ዓይነት ማቀናበር
The controller supports various battery types. To set the battery type:
- Press the "ENTER" button and hold for 5 seconds under the battery voltagሠ በይነገጽ.
- Press the "SELECT" button when the battery type interface is flashing to cycle through options (Sealed, Gel, Flooded, LiFePO4, Li(NiCoMn)O2, User).
- Press the "ENTER" button to confirm the battery type.
For lithium batteries, specific series configurations are available (e.g., LiFePO4 4s/8s, Li(NiCoMn)O2 3s/6s).
5.3. Setting Load Working Mode
The MT52 remote meter allows for diversified load control modes:
- በእጅ መቆጣጠሪያ
- አብራ/አጥፋ
- በርቷል + ሰዓት ቆጣሪ
- የጊዜ መቆጣጠሪያ
Refer to the MT52 User Manual for detailed instructions on setting these modes.
5.4. Setting Battery Parameters (via MT50/MT52)
For advanced battery parameter settings, use the MT50/MT52 remote meter. Navigate to 'Control Para.' in the menu interface. You can adjust parameters such as Over Voltage Disconnect, Charging Limit, Equalize Charging, Boost Charging, Float Charging, Low Voltage Reconnect, and Discharge Limit. When setting parameters for 'USER' battery type, ensure the voltage parameters follow the specified logic (e.g., Over Voltagሠ አቋርጥ ጥራዝtagሠ > የኃይል መሙያ ገደብ ጥራዝtagሠ) ፡፡
6. ዝርዝሮች
| መለኪያ | ዋጋ |
|---|---|
| ደረጃ የተሰጠው ክፍያ የአሁኑ | 40 ኤ |
| ስርዓት ጥራዝtage | 12V/24V Auto Work |
| ከፍተኛ የፒቪ ግቤት ኃይል (12 ቮ) | 520 ዋ |
| ከፍተኛ የፒቪ ግቤት ኃይል (24 ቮ) | 1040 ዋ |
| ከፍተኛ. PV ክፍት ዑደት ጥራዝtage | 100VDC |
| ባትሪ ቁtagሠ ክልል | 8V~32V |
| የተርሚናል መጠን | 6AWG (16 ሚሜ²) |
| ልኬቶች (L*W*H) | 252 x 180 x 63 ሚሜ (9.92 x 7.09 x 2.48 ኢንች) |
| የተጣራ ክብደት | 1.65 ኪግ (3.64 ፓውንድ) |
| የማሳያ ዓይነት | LCD |
| ቁሳቁስ | Lithium (compatible) |
7. Electronic Protections
The Tracer4210AN-G3 controller includes multiple electronic protections to ensure safe operation:
- PV ከአሁኑ/ኃይል በላይ
- PV አጭር ዙር
- PV ተገላቢጦሽ ዋልታ
- የምሽት ተቃራኒ ኃይል መሙላት
- የባትሪ ተገላቢጦሽ ፖላሪቲ
- ባትሪ በላይ ጥራዝtage
- ባትሪ ከመጠን በላይ መፍሰስ
- የባትሪ ሙቀት መጨመር
- ተቆጣጣሪው ከመጠን በላይ ማሞቅ
- የሊቲየም ባትሪ ዝቅተኛ የሙቀት መጠን
- አጭር ዙር ጫን
- ጫን ከመጠን በላይ ጭነት
- TVS ከፍተኛ ጥራዝtagሠ መሸጋገሪያዎች
8. መላ መፈለግ
If you encounter issues with your EPEVER MPPT Solar Charge Controller, consider the following:
- ምንም ማሳያ/ኃይል የለም፡ Ensure the battery is correctly connected and has sufficient voltage. Check all wiring for loose connections or incorrect polarity.
- መሙላት የለም፡ Verify solar panel connections and ensure adequate sunlight. Check PV input voltage and current on the display. Confirm battery type settings are correct.
- ጭነት እየሰራ አይደለም፦ Check load connections and ensure the load is not overloaded or short-circuited. Verify load control mode settings on the MT52.
- ያልተለመዱ ንባቦች; Ensure temperature sensor is correctly connected and not damaged. Check communication cables for secure connections.
For persistent issues, refer to the detailed troubleshooting section in the full user manual or contact EPEVER technical support.
9. የድጋፍ መረጃ
For technical assistance, product inquiries, or warranty claims, please contact EPEVER's authorized sales agent, Goland Century. They offer free technical support and have service centers in various regions.
የእውቂያ መረጃ፡-
- የቴክኒክ ድጋፍ; Available through Goland Century technicians.
- የሶፍትዌር ማውረድ EPEVER PC software can be downloaded from the official EPEVER webጣቢያ.
Please refer to the official EPEVER website or your product documentation for the most up-to-date contact details and support resources.
