ቤህሪንገር NX1000 እጅግ በጣም ቀላል ክብደት 1000 ዋት ክላሲ-ዲ ፓወር Ampየሊፊየር መመሪያ መመሪያ

1. መግቢያ

This manual provides essential information for the safe and efficient operation of your Behringer NX1000 Ultra-Lightweight 1000W Class-D Power Amplifier. Please read this manual thoroughly before using the product to ensure proper setup, usage, and maintenance.

ፊት ለፊት view of the Behringer NX1000 ampገላጭ ፣ ማሳያasinግ የታመቀ ዲዛይኑ እና የፊት ፓነል ቁጥጥሮቹ።

2. በሳጥኑ ውስጥ ያለው

ሲፈቱ ሁሉም ክፍሎች መገኘታቸውን ያረጋግጡ፡-

• Behringer NX1000 Ultra-Lightweight 1000-Watt Class-D Power Ampማብሰያ
• የኃይል ገመድ
• የትምህርት መመሪያ (ይህ ሰነድ)

3. ቁልፍ ባህሪያት

• Delivers 2 x 500 watts into 2 ohms; 2 x 300 watts into 4 ohms; 1000 watts into 4 ohms (Bridge mode) and weighs less than 7.3 lbs/ 3.3 kg.
• Ultimate reliability through revolutionary cool-running high-density Class-D technology with "near-zero" Thermal buildup.
• ለድምጽ አልባ ድምጽ፣ ለከፍተኛ ጊዜያዊ ምላሽ እና ለዝቅተኛ የኃይል ፍጆታ እጅግ በጣም ቀልጣፋ የመቀየሪያ ሁነታ የኃይል አቅርቦት።
• Built-in stereo crossover with low-cut, high-cut and full range Mode.
• SmartSense loudspeaker Impedance compensation features fully Linear frequency response at any speaker load Impedance.

An efficiency graph illustrating the superior performance of Class-D technology compared to Class-AB, showing higher efficiency across various output power levels.

A frequency response graph demonstrating the linear output achieved by SmartSense loudspeaker impedance compensation, ensuring consistent sound quality regardless of speaker load.

4. ማዋቀር

Proper setup is crucial for optimal performance and safety. Follow these guidelines for connecting your ampማስታገሻ ፦

4.1. የመደርደሪያ መጫኛ

The NX1000 is designed for standard 19-inch rack mounting. Secure the amplifier using appropriate rack screws through the rack ears on both sides of the unit.

የጎን ፕሮfile of the Behringer NX1000 amplifier, highlighting its rack-mountable chassis.

4.2. የድምፅ ግንኙነቶች

የድምጽ ምንጭዎን ያገናኙ (ቀላቃይ፣ ቅድመampሊፋየር፣ ወዘተ) ወደ amplifier's input jacks. The NX1000 supports both XLR and 1/4-inch TRS connectors for balanced input signals.

Connect your passive loudspeakers to the amplifier's output terminals. The NX1000 provides both speakON and binding post outputs for flexible speaker connectivity.

ዝርዝር view of the rear panel, showing input and output connectors for audio signals and speakers.

4.3. የኃይል ግንኙነት

Connect the supplied power cable to the AC inlet on the rear panel of the amplifier and then to a suitable power outlet.

4.4. የቪዲዮ መመሪያን ማዋቀር

5. በመስራት ላይ Ampማብሰያ

5.1. ማብራት / ማጥፋት

የሚለውን ይጫኑ ኃይል የፊት ፓነልን ለማዞር ያብሩ amplifier on or off. The ኃይል LED will illuminate when the unit is active.

Close-up of the power button, indicating its location on the front panel.

5.2. የድምፅ መቆጣጠሪያዎች

አስተካክል። ቻናል አ እና ቻናል ቢ gain knobs on the front panel to set the desired output volume for each channel. The LCD display will show the decibel levels for precise adjustment.

5.3. ሁነታ ምርጫ

On the rear panel, use the MODE switch to select between ስቴሬኦ, ድልድይ, ወይም ትይዩ operation, depending on your speaker configuration requirements.

• ስቴሪዮ፡ Each channel operates independently, providing separate left and right audio signals.
• BRIDGED: Combines the power of both channels into a single, high-power output, ideal for driving a single subwoofer.
• ፓራልል Sends the same mono signal to both channels, useful for driving multiple speakers with identical audio.

5.4. ተሻጋሪ ቅንጅቶች

Utilize the built-in stereo crossover with low-cut, high-cut, and full-range modes to optimize the frequency response for your specific speakers or subwoofers.

5.5. የ LED አመልካቾች

The front panel features several LED indicators:

• PRO (Protect): የሚያበራ ከሆነ amplifier enters protection mode due to overload, overheating, or short-circuit.
• ገደብ፡ Indicates that the output signal is approaching clipping. Reduce the input level to prevent distortion.
• ምልክት፡- Lights up when an audio signal is present on the respective channel.
• ኃይል፡- መሆኑን ያመለክታል ampማንሻ በርቷል።

5.6. ምርት አብቅቷልview ቪዲዮ

6. ጥገና

የእርስዎን ረጅም ዕድሜ እና ጥሩ አፈጻጸም ለማረጋገጥ ampማንሻ፣ እነዚህን የጥገና ምክሮች ይከተሉ፡-

• ለስላሳ እና ደረቅ ጨርቅ በማጽዳት ክፍሉን ንፁህ ያድርጉት. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን ከመጠቀም ይቆጠቡ።
• በአካባቢው በቂ የአየር ዝውውርን ያረጋግጡ amplifier to prevent overheating. Do not block the ventilation grilles.
• ሁሉንም የኬብል ግንኙነቶች ደህንነቱ የተጠበቀ መገጣጠም እና የመበስበስ ምልክቶችን በየጊዜው ያረጋግጡ።

7. መላ መፈለግ

If you encounter issues with your Behringer NX1000 ampሊፋይ፣ የሚከተሉትን የተለመዱ ችግሮችን እና መፍትሄዎችን ተመልከት።

• ምንም የድምፅ ውፅዓት የለም
  • Check all audio input and output connections.
  • ያረጋግጡ amplifier is powered on and the POWER LED is illuminated.
  • Verify that input sources are active and sending a signal.
  • Adjust channel gain knobs and master volume on your mixer/preamp.
• የተዛባ ድምጽ;
  • Check if the LIMIT LED is illuminated; reduce input level if it is.
  • የተናጋሪው ኢምፕሬሽን የሚዛመድ መሆኑን ያረጋግጡ ampየሊፋየር ችሎታዎች.
  • Inspect speaker cables for damage or incorrect wiring.
• Amplifier Enters Protect Mode (PRO LED illuminated):
  • አጥፋው amplifier and disconnect all speakers.
  • Check for short circuits in speaker cables or faulty speakers.
  • Ensure proper ventilation to prevent overheating. Allow the unit to cool down.
  • Verify that the speaker load impedance is within the amplifier's specified range (e.g., not below 2 ohms per channel).
• ከመጠን በላይ የንፋስ ጫጫታ;
  • ያረጋግጡ amplifier has sufficient airflow and is not in an enclosed space.
  • Clean any dust buildup from the fan and ventilation grilles.

8. ዝርዝሮች

9. ዋስትና እና ድጋፍ

The Behringer NX1000 ampሊፋይ ከ ሀ ጋር አብሮ ይመጣል የተወሰነ ዋስትና. For detailed warranty information, product support, or service inquiries, please visit the official Behringer webጣቢያ ወይም የደንበኞቻቸውን ድጋፍ በቀጥታ ያነጋግሩ።

Always refer to the manufacturer's official resources for the most accurate and up-to-date information regarding your product.