Paulmann MaxLED 79797 RGBW Controller User Manual

መግቢያ

This manual provides comprehensive instructions for the safe and efficient use of your Paulmann MaxLED 79797 RGBW Controller. This device allows you to control Paulmann MaxLED RGBW light strips, enabling functions such as switching, dimming, and changing light colors and effects via the included wireless remote control. The controller operates without requiring direct line-of-sight to the remote, offering a range of up to 30 meters.

አስፈላጊ የደህንነት መመሪያዎች

• ከመጫንዎ እና ከመተግበሩ በፊት ሁሉንም መመሪያዎች በጥንቃቄ ያንብቡ.
• ይህንን መመሪያ ለወደፊት ማጣቀሻ ያቆዩት።
• ይህ ምርት ለቤት ውስጥ አገልግሎት ብቻ የተነደፈ ነው (IP20 ደረጃ)። ለእርጥበት ወይም ለከፍተኛ የሙቀት መጠን አያጋልጡ።
• ከማንኛውም ጭነት ወይም የጥገና ሥራ በፊት የኃይል አቅርቦቱ መቋረጡን ያረጋግጡ።
• Only use with Paulmann MaxLED RGBW strips and compatible 24V power supplies.
• Do not attempt to open or modify the controller or remote control. This will void the warranty.
• ባትሪዎችን ከልጆች እጅ ያርቁ። ያገለገሉ ባትሪዎችን በኃላፊነት ይጣሉ።

የጥቅል ይዘቶች

ሁሉም ክፍሎች በጥቅሉ ውስጥ መገኘታቸውን ያረጋግጡ፡-

• 1x Paulmann MaxLED RGBW Controller (Model 79797)
• 1x ገመድ አልባ የርቀት መቆጣጠሪያ
• 1x Assembly Instructions (this manual)

Image: The MaxLED RGBW Controller and its wireless remote control. The controller is a small white rectangular unit with a cable, and the remote is an oval-shaped white device with various buttons and a color wheel.

Image: Diagram showing the MaxLED RGBW Controller and remote control with their approximate dimensions. The controller measures 22.5x85x45mm and the remote 20x110x53mm. A 150mm cable connects the controller to the LED strip.

ማዋቀር እና መጫን

Follow these steps for proper installation of your MaxLED RGBW Controller:

1. የመጫኛ ቦታን ያዘጋጁ; Ensure the surface where the LED strip will be mounted is clean, dry, and free of dust.
2. የ LED ማሰሪያውን ያገናኙ; Connect your Paulmann MaxLED RGBW strip to the output cable of the controller. The system uses an easy plug-in connection. Ensure the connectors are securely fastened.
3. የኃይል አቅርቦትን ማገናኘት; Connect a compatible 24V Paulmann power supply (not included) to the input side of the MaxLED RGBW Controller.
4. መቆጣጠሪያውን ይጫኑ; The controller is designed for hidden installation. Place it in a discreet location where it is protected from physical damage and moisture, but still allows for proper signal transmission from the remote (up to 30m range).
5. አብራ፡ Once all connections are secure, plug the power supply into a suitable electrical outlet.
6. Pairing the Remote Control (if necessary): The remote control is usually pre-paired. If not, refer to the "Operating Instructions" section for pairing procedures.

Image: This image illustrates the MaxLED expandable component system, highlighting three key aspects: "Easy to connect" (showing a hand connecting an LED strip), "Easy to mount" (showing an LED strip being applied to a surface), and "Easy to control" (showing the remote control). This demonstrates the simplicity of the setup process.

የአሠራር መመሪያዎች

The wireless remote control allows full command over your MaxLED RGBW strips.

የርቀት መቆጣጠሪያ ተግባራት;

ምስል: ዝርዝር view of the MaxLED RGBW remote control, showing its various buttons and the central color wheel. The remote features power, brightness, mode, speed, and color selection controls.

• ማብሪያ ማጥፊያ (O): Press to turn the LED strips On or Off.
• የብሩህነት ቁጥጥር (B +/-): Use the '+' button to increase brightness and '-' to decrease brightness.
• የቀለም ጎማ፡ Touch the color wheel to select a desired static color for your LED strips.
• Mode Selection (M): Cycle through various pre-programmed light effects and color changing modes.
• የፍጥነት መቆጣጠሪያ (S +/-): When in a dynamic mode, use the '+' button to increase the speed of the effect and '-' to decrease it.

የርቀት መቆጣጠሪያውን ማጣመር;

If your remote control is not responding, it may need to be paired with the controller:

1. መቆጣጠሪያው መብራቱን ያረጋግጡ።
2. Within 3 seconds of powering on the controller, press and hold the "Mode" (M) button on the remote control for a few seconds.
3. The LED strips should flash to indicate successful pairing.

ጥገና

ማጽዳት፡

To clean the controller and remote control, gently wipe with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as this can damage the components.

የርቀት መቆጣጠሪያ የባትሪ ምትክ

The remote control requires batteries (type not specified in product data, typically CR2032 or similar button cell). If the remote's range decreases or it stops responding, replace the battery:

1. የባትሪውን ክፍል ከርቀት መቆጣጠሪያው ጀርባ ያግኙት።
2. Open the compartment using a small screwdriver or by sliding the cover.
3. የድሮውን ባትሪ ያስወግዱ እና አዲስ ያስገቡ፣ ይህም ትክክለኛውን የፖላራይቲ (+/-) ያረጋግጣል።
4. የባትሪውን ክፍል ደህንነቱ በተጠበቀ ሁኔታ ይዝጉ።
5. በአካባቢው ደንቦች መሰረት የድሮውን ባትሪ ያስወግዱ.

መላ መፈለግ

ዝርዝሮች

Image: The MaxLED RGBW Controller and its remote control, emphasizing the 2.4 GHz RF wireless technology for reliable communication.

ዋስትና እና ድጋፍ

ዋስትና፡-

Paulmann offers a 1-year availability for spare parts for this product. For specific warranty terms and conditions, please refer to the official Paulmann webጣቢያ ወይም ቸርቻሪዎን ያነጋግሩ።

የደንበኛ ድጋፍ፡

For further assistance, technical support, or inquiries regarding your Paulmann MaxLED RGBW Controller, please visit the official Paulmann website or contact their customer service department. Contact information can typically be found on the product packaging or the Paulmann webጣቢያ.

ፖልማን Webጣቢያ፡ www.paulmann.com