Lexmark MS810N

Lexmark MS810N Laser Printer User Manual

Model: MS810N

መግቢያ

This manual provides essential instructions for the setup, operation, maintenance, and troubleshooting of your Lexmark MS810N monochrome laser printer. Please read this guide thoroughly to ensure proper use and to maximize the performance and longevity of your device.

Lexmark MS810N Laser Printer front view

ምስል፡ ፊት ለፊት view of the Lexmark MS810N Laser Printer, showing its compact design and control panel.

ማዋቀር

1. ማሸግ እና የመጀመሪያ ምርመራ

Carefully remove the printer from its packaging. Verify that all included components are present:

Inspect the printer for any visible damage. If damage is found, do not proceed with setup and contact support.

2. Installing the Toner Cartridge and Drum Unit

  1. የአታሚውን የፊት መግቢያ በር ይክፈቱ።
  2. Remove the drum unit from its protective packaging.
  3. Insert the drum unit into the printer until it clicks into place.
  4. Unpack the toner cartridge. Gently shake it horizontally to distribute the toner evenly.
  5. Insert the toner cartridge into the drum unit until it locks securely.
  6. የመግቢያ በርን ዝጋ።

3. የመጫኛ ወረቀት

The printer supports plain paper up to A4/Letter size with a maximum input sheet capacity of 650 sheets.

  1. የወረቀት ማስቀመጫውን ይክፈቱ.
  2. የወረቀት መመሪያዎችን ከጫኑት ወረቀት መጠን ጋር እንዲመሳሰል ያስተካክሉ.
  3. የወረቀት ቁልል ወደ ትሪው ይጫኑ, ጠፍጣፋ እና ከከፍተኛው የመሙያ መስመር በታች መሆኑን ያረጋግጡ.
  4. የወረቀት ማስቀመጫውን ዝጋ.

4. Connecting Power and Network/USB

5. የአታሚ ነጂዎችን መጫን

After connecting the printer, install the necessary drivers on your computer. Drivers can typically be found on the Lexmark official support website by searching for the MS810N model. Follow the on-screen instructions for installation.

የአሠራር መመሪያዎች

1. መሰረታዊ ማተሚያ

ሰነድ ለማተም፡-

  1. አታሚው መብራቱን እና ከኮምፒዩተርዎ ወይም አውታረ መረብዎ ጋር መገናኘቱን ያረጋግጡ።
  2. በኮምፒተርዎ ላይ ለማተም የሚፈልጉትን ሰነድ ይክፈቱ።
  3. ይምረጡ File > አትም (ወይም በመተግበሪያዎ ውስጥ ያለው ተመጣጣኝ ትዕዛዝ)።
  4. Choose the Lexmark MS810N from the list of available printers.
  5. እንደ አስፈላጊነቱ የህትመት ቅንብሮችን ያስተካክሉ (ለምሳሌ፣ የቅጂዎች ብዛት፣ የወረቀት መጠን፣ ባለ ሁለትዮሽ ህትመት)።
  6. ጠቅ ያድርጉ አትም.

The printer is capable of monochrome printing at speeds up to 55 pages per minute (ppm).

2. የቁጥጥር ፓነልን በመጠቀም

The Lexmark MS810N features a 2.4-inch LCD display. Use the navigation buttons next to the display to access printer settings, view status, and perform various functions directly from the printer.

3. Duplex Printing (Two-Sided)

The MS810N supports automatic dual-sided printing. To enable this feature, select the duplex printing option within your computer's print dialog box before sending the print job.

ጥገና

1. Replacing Toner Cartridge and Drum Unit

When the printer indicates low toner or a drum unit nearing its end of life, replace the respective component. Refer to the installation steps in the Setup section for guidance. Always use genuine Lexmark replacement parts for optimal performance.

2. ማተሚያውን ማጽዳት

አዘውትሮ ማጽዳት የህትመት ጥራትን ለመጠበቅ እና የአታሚውን ዕድሜ ለማራዘም ይረዳል።

3. የወረቀት መጨናነቅን ማጽዳት

If a paper jam occurs, the printer's display will show an error message. Follow these general steps:

  1. ማተሚያውን ያጥፉ እና ይንቀሉት.
  2. Open all accessible covers and trays.
  3. ማንኛውንም የተጨናነቀ ወረቀት በጥንቃቄ ያስወግዱ, እንዳይቀደድ ወደ ወረቀት መንገድ ይጎትቱ.
  4. ትንንሽ ቁርጥራጭ ወረቀቶች በውስጣቸው እንደማይቀሩ ያረጋግጡ።
  5. Close all covers and trays, then plug in and power on the printer.

መላ መፈለግ

ችግር ሊሆን የሚችል ምክንያት / መፍትሄ
አታሚ አይታተምም
  • Ensure printer is powered on and cables (USB/Ethernet) are securely connected.
  • Check printer status on your computer; clear any pending print jobs.
  • Verify correct printer drivers are installed.
  • አታሚውን እና ኮምፒተርውን እንደገና ያስጀምሩ.
የወረቀት Jam ስህተት
  • Follow the paper jam clearing steps in the Maintenance section.
  • ወረቀቱ በትክክል መጫኑን እና እንዳልተከሸፈ ወይም እንዳልተበላሸ ያረጋግጡ።
  • የወረቀት ትሪዎችን ከመጠን በላይ አትጫኑ።
ደካማ የህትመት ጥራት
  • Check toner cartridge and drum unit levels; replace if low or empty.
  • ለሌዘር ህትመት ተገቢውን ወረቀት እየተጠቀሙ መሆንዎን ያረጋግጡ።
  • ከአታሚው የቁጥጥር ፓነል የህትመት ጥራት ምርመራ ያካሂዱ።
  • በጥገና ክፍል ውስጥ እንደተገለጸው አታሚውን ያጽዱ።
የአውታረ መረብ ግንኙነት ጉዳዮች
  • Verify Ethernet cable is connected properly to both printer and network device.
  • Check network settings on the printer's control panel.
  • Ensure your network is functioning correctly.
  • Restart your router/switch and the printer.

For more detailed troubleshooting, refer to the comprehensive Lexmark support documentation available online.

ዝርዝሮች

የምርት ስምሌክስማርክ
ሞዴልMS810N
የህትመት ቴክኖሎጂሌዘር (ሞኖክሮም)
ከፍተኛ የህትመት ፍጥነት (ሞኖክሮም)እስከ 55 ፒፒኤም
ከፍተኛው የህትመት ጥራት1200 x 1200 ዲ ፒ አይ
ባለሁለት ጎን ማተምአዎ
ግንኙነትዩኤስቢ 2.0, Gigabit ኤተርኔት
የሃርድዌር በይነገጽኢተርኔት ፣ ዩኤስቢ
የማሳያ ዓይነትLCD
የማሳያ መጠን2.4 ኢንች
ፕሮሰሰር1 ፕሮሰሰር
ራም512 ሜባ
ከፍተኛው የግቤት ሉህ አቅም650 ሉሆች
የህትመት ሚዲያ ይደገፋልወረቀት (ቀላል)
የሉህ መጠንA4 NA (A4/Letter)
ጥራዝtage110 ቮልት
የምርት ልኬቶች42.42 x 51.05 x 41.91 ሴሜ (16.7 x 20.1 x 16.5 ኢንች)
የእቃው ክብደት27.67 ኪ.ግ (61 ፓውንድ)
የተካተቱ አካላትToner Cartridge, Drum Unit, Power Cable, Network/USB Cable (where applicable)

የዋስትና መረጃ

This renewed Lexmark MS810N printer comes with a 90-ቀን የተወሰነ ዋስትና. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the documentation provided with your purchase or contact the seller directly. Renewed products are also eligible for replacement or refund under the Amazon Renewed Guarantee if not satisfied with the purchase.

ድጋፍ

For technical assistance, driver downloads, or further support regarding your Lexmark MS810N printer, please visit the official Lexmark support website. For issues related to your renewed product purchase or warranty claims, contact the seller, Printer Ready Canada, or Amazon Renewed customer service.

ተዛማጅ ሰነዶች - MS810N

ቅድመview የሌክስማርክ MS710-MS818፣ M5155-M5170 ተከታታይ የአታሚዎች አገልግሎት መመሪያ
የሌክስማርክ አገልግሎት መመሪያ ለMS710፣ MS711፣ MS810፣ MS811፣ MS812፣ MS817፣ MS818፣ M5155፣ M5163 እና M5170 አታሚዎች መላ ፍለጋ፣ ጥገና፣ ክፍሎች እና ዝርዝር መግለጫዎችን በዝርዝር ያቀርባል።
ቅድመview ሌክስማርክ CX331፣ CX431፣ MC3224፣ MC3326፣ MC3426 MFPs የተጠቃሚ መመሪያ
ይህ አጠቃላይ የተጠቃሚ መመሪያ ለሌክስማርክ CX331፣ CX431፣ MC3224፣ MC3326 እና MC3426 Multifunction Printers (MFPs) ዝርዝር መመሪያዎችን ይሰጣል። ለእነዚህ Lexmark መሳሪያዎች ተጠቃሚዎች አስፈላጊ መመሪያ በመስጠት ማዋቀርን፣ መጫንን፣ ማዋቀርን፣ አሠራርን፣ ጥገናን እና መላ መፈለግን ይሸፍናል።
ቅድመview Lexmark XM9100 የተከታታይ የተጠቃሚ መመሪያ፡ ማዋቀር፣ አሠራር እና ጥገና
ይህ ሁሉን አቀፍ የተጠቃሚ መመሪያ የሌክስማርክ XM9100 Series ባለብዙ ተግባር ማተሚያን ለመስራት እና ለማቆየት አስፈላጊ መረጃን ይሰጣል። ስለ መጀመሪያ ማዋቀር፣ ዕለታዊ አጠቃቀም፣ እንደ ማተም፣ መቅዳት፣ መቃኘት እና ፋክስ የመሳሰሉ የላቁ ባህሪያትን እንዲሁም የመላ መፈለጊያ ምክሮችን እና የደህንነት ጥንቃቄዎችን በተመለከተ ዝርዝር መመሪያዎችን ያግኙ።
ቅድመview Lexmark B3340, B3442, M1342, MS331, MS431, MS439 Printers User's Guide
Comprehensive user's guide for Lexmark B3340, B3442, M1342, MS331, MS431, and MS439 printers. Covers setup, installation, operation, maintenance, and troubleshooting. Published March 2021.
ቅድመview የሌክስማርክ X6100 ተከታታይ የማዋቀሪያ መመሪያ፡ ፈጣን የማስጀመሪያ መመሪያዎች
የሌክስማርክ X6100 ተከታታይ ሁሉም-በ-አንድ አታሚን ለማዋቀር አጭር፣ ደረጃ በደረጃ መመሪያ። ደህንነትን፣ የመጀመሪያ ማዋቀርን፣ የካርቱን ጭነት እና የኮምፒውተር ግንኙነትን ይሸፍናል፣ ባለብዙ ቋንቋ መመሪያዎችን ወደ እንግሊዝኛ ያዋህዳል።
ቅድመview Lexmark CX310 Series and CX317 User's Guide: Setup, Operation, and Maintenance
Comprehensive user's guide for Lexmark CX310 Series and CX317 multifunction printers, covering setup, printing, copying, scanning, troubleshooting, and safety.