1. መግቢያ እና በላይview
The Laserliner CoatingTest-Master 082.150A is a precision instrument designed for non-destructive measurement of coating thicknesses on various metal surfaces. It utilizes both magnetic induction and eddy current principles to accurately determine the thickness of non-metallic layers.
This device is capable of measuring non-magnetic coatings such as paint and zinc on steel, as well as insulating coatings like paint and anodized layers on non-ferrous metals. It features automatic identification of the base material (ferrous/ferromagnetic or non-ferrous/non-ferromagnetic), an internal memory for 400 measured values, and options for one-point and two-point calibration. Data transfer and evaluation are facilitated via a USB interface. The illuminated display provides Min/Max/Avg readings for comprehensive analysis.
Figure 1: Laserliner CoatingTest-Master 082.150A device.
2. የጥቅል ይዘቶች
ጥቅሉን ሲከፍቱ፣እባክዎ የሚከተሉት ነገሮች በሙሉ መካተታቸውን ያረጋግጡ።
- Laserliner CoatingTest-Master 082.150A device
- መከላከያ መያዣ
- የዩኤስቢ ገመድ ለመረጃ ማስተላለፍ
- Calibration foils/plates (for one-point and two-point calibration)
- መመሪያ መመሪያ (ይህ ሰነድ)
- Software CD (for data evaluation)
- ባትሪዎች (ከተካተቱ)
Figure 2: Contents of the CoatingTest-Master package.
3. ማዋቀር
3.1 የባትሪ ጭነት
The CoatingTest-Master requires batteries for operation. Locate the battery compartment on the back of the device. Insert the specified battery type (e.g., AAA batteries) ensuring correct polarity as indicated inside the compartment. Close the battery cover securely.
3.2 ማብራት / ማጥፋት
ተጭነው ይያዙት። ኃይል አዝራር (ብዙውን ጊዜ በሃይል ምልክት ምልክት ተደርጎበታል) ⏻) to turn the device on. The display will illuminate. To turn off the device, press and hold the ኃይል button again until the display shuts down.
4. የአሠራር መመሪያዎች
4.1 መሰረታዊ መለኪያ
To perform a basic coating thickness measurement:
- መሣሪያው መብራቱን ያረጋግጡ።
- Place the small measuring head firmly and perpendicularly onto the surface to be measured. The device will automatically detect the base material (ferrous or non-ferrous).
- The coating thickness reading will be displayed on the screen in micrometers (µm).
- Lift the measuring head from the surface to prepare for the next measurement.
Figure 3: The device features a small measuring head for pinpoint accuracy.
4.2 ልኬት
For accurate measurements, especially when measuring different types of coatings or base materials, calibration is essential. The CoatingTest-Master supports one-point and two-point calibration.
4.2.1 የአንድ ነጥብ መለኪያ
This method uses a single known thickness to adjust the device. Refer to the on-screen prompts or specific manual section for detailed steps on using the provided calibration foils.
4.2.2 ባለ ሁለት ነጥብ መለኪያ
This method uses two known thicknesses (e.g., zero and a specific thickness) for more precise calibration across a range. Follow the device's on-screen instructions for this procedure.
4.3 የውሂብ አስተዳደር
The device has an internal memory for up to 400 measured values. Use the navigation buttons to review stored data. To transfer data to a computer, connect the device via the provided USB cable and use the accompanying software for evaluation.
4.4 የማሳያ ተግባራት
The illuminated display shows the current measurement, and can also cycle through Minimum (Min), Maximum (Max), and Average (Avg) values of a series of measurements. Consult the device's on-screen menu for accessing these display modes.
5. ጥገና
Proper maintenance ensures the longevity and accuracy of your CoatingTest-Master.
- ማጽዳት፡ Wipe the device with a soft, dry cloth. Do not use abrasive cleaners or solvents. Ensure the measuring head is kept clean and free of debris.
- ማከማቻ፡ When not in use, store the device in its protective carrying case in a dry, dust-free environment, away from extreme temperatures and direct sunlight.
- የባትሪ መተካት፡ Replace batteries promptly when the low battery indicator appears on the display to avoid interruption of measurements and potential data loss.
6. መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| መሣሪያው አይበራም። | የሞቱ ወይም በስህተት የተጫኑ ባትሪዎች። | የባትሪውን ዋልታ ያረጋግጡ; ባትሪዎችን ይተኩ. |
| ትክክል ያልሆኑ ንባቦች። | Device not calibrated; dirty measuring head; incorrect measurement technique. | Perform calibration; clean measuring head; ensure proper contact with surface. |
| USB data transfer failure. | Incorrect cable connection; software not installed or running; driver issues. | Ensure secure USB connection; install/reinstall software and drivers; try a different USB port. |
7. ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| የመለኪያ መርህ | Magnetic Induction (FE) / Eddy Current (NFe) |
| Measuring Range (FE) | 0 - 1250 µm |
| Accuracy (FE) | 0–850 µm: ±(3% + 1 µm); 850–1250 µm: ±5% |
| Measuring Range (NFe) | 0 - 1250 µm |
| Accuracy (NFe) | 0–850 µm: ±(3% + 1 µm); 850–1250 µm: ±5% |
| Base Material Identification | Automatic (Ferrous / Non-Ferrous) |
| ማህደረ ትውስታ | 400 የሚለኩ እሴቶች |
| መለካት | One-point and Two-point |
| በይነገጽ | ዩኤስቢ |
| ማሳያ | Illuminated, Min/Max/Avg display |
8. ዋስትና እና ድጋፍ
Laserliner products are manufactured with high quality standards. For information regarding warranty coverage, technical support, or service, please refer to the warranty card included with your product or visit the official Laserliner webጣቢያ. ለማንኛውም የዋስትና የይገባኛል ጥያቄዎች የግዢ ደረሰኝዎን እንደ ግዢ ማረጋገጫ ያቆዩት።
For further assistance, you may contact Laserliner customer service through their official channels. Contact details are typically available on the manufacturer's webጣቢያ ወይም በምርት ማሸጊያው ውስጥ.
