መግቢያ
Thank you for choosing the Polk Audio PSW10 10-Inch Powered Subwoofer. This manual provides comprehensive instructions to help you set up, operate, and maintain your subwoofer for optimal performance. Please read these instructions carefully before use and retain them for future reference.
በሣጥኑ ውስጥ ያለው
- Polk Audio PSW10 10-Inch Powered Subwoofer
- የኃይል ገመድ
- የተጠቃሚ መመሪያ
- Policy Documentation
ቁልፍ ባህሪያት
- 10-Inch Dynamic Balance Woofer: Equipped with a 10-inch polymer-composite dynamic-balance cone driver for deep, precise bass.
- Built-in High-Current Ampማስታገሻ ፦ Delivers 50 watts continuous power and 100 watts dynamic power for impactful low-frequency reproduction.
- Non-Resonant Enclosure: All-MDF enclosure construction with 0.75-inch-thick baffles and internal bracing minimizes resonance for clean sound.
- ሁለገብ ግንኙነት; Features line- and speaker-level inputs and speaker-level outputs for easy integration with various audio systems.
- Klippel Measurement Technology: Utilizes laser-based Klippel measurement technology for improved linearity and reduced distortion.
ምስል 1: የፊት view of the Polk Audio PSW10 subwoofer, showcasing the 10-inch dynamic balance woofer and front-firing port for enhanced bass impact.
ማዋቀር
1. አቀማመጥ
Optimal subwoofer placement is crucial for sound quality. Experiment with different locations in your room to find the best balance of bass response. Generally, placing the subwoofer in a corner can enhance bass output, while placing it closer to your main speakers can improve integration. Avoid placing it directly against a wall if it causes excessive booming.
2. ግንኙነቶች
The PSW10 offers flexible connection options:
- Line-Level Input (RCA): Connect your receiver's subwoofer output (LFE or Sub Out) to the LFE input on the subwoofer using an RCA cable. If your receiver has left and right pre-out jacks, use both left and right line-level inputs on the subwoofer.
- Speaker-Level Inputs/Outputs: For receivers without a dedicated subwoofer output, connect the speaker-level outputs from your receiver to the speaker-level inputs on the subwoofer. Then, connect the speaker-level outputs from the subwoofer to your main left and right speakers.
Figure 2: Rear panel connections and controls of the Polk Audio PSW10 subwoofer.
የአሠራር መመሪያዎች
Once connected, adjust the following controls on the rear panel (refer to Figure 2):
- የድምጽ መቆጣጠሪያ፡- የንዑስ ድምጽ ማጉያውን አጠቃላይ የውጤት ደረጃ ያስተካክላል። በዝቅተኛ ቅንብር ይጀምሩ እና ባስዎ ከዋና ድምጽ ማጉያዎችዎ ጋር ያለምንም እንከን እስኪዋሃድ ድረስ ቀስ በቀስ ይጨምሩ።
- ዝቅተኛ ማለፊያ ማጣሪያ፡ This control sets the upper frequency limit for the subwoofer. Adjust it to match the low-frequency capabilities of your main speakers. A common starting point is 80 Hz.
- Phase Toggle Switch (0°/180°): Adjust this switch to achieve the best bass impact and blend with your main speakers. Listen to music or a movie scene with strong bass and switch between 0° and 180° to determine which setting provides the most coherent and impactful bass.
- 3-Way Power Switch (Auto/On/Off):
- ራስ-ሰር The subwoofer will automatically turn on when it detects an audio signal and enter standby mode after a period of inactivity.
- በርቷል፡ ንዑስ ሰዋወር ያለማቋረጥ እንደበራ ይቆያል።
- ጠፍቷል፡ የሱፍ ሰሪው ኃይል ተዘግቷል።
ጥገና
To ensure the longevity and optimal performance of your Polk Audio PSW10 subwoofer, follow these maintenance guidelines:
- ማጽዳት፡ Use a soft, dry cloth to wipe down the cabinet. Avoid using harsh chemicals, solvents, or abrasive cleaners, as these can damage the finish.
- አቀማመጥ፡- Keep the subwoofer away from direct sunlight, heat sources, and excessive moisture. Ensure adequate ventilation around the ampከመጠን በላይ ሙቀትን ለመከላከል የሊፋየር ፓነል።
- ኃይል፡- Disconnect the power cable from the wall outlet if the subwoofer will not be used for an extended period.
መላ መፈለግ
| ችግር | ሊሆን የሚችል መፍትሄ |
|---|---|
| ከንዑስwoofer ምንም ድምፅ የለም። | Check power connection and ensure the 3-way power switch is set to 'On' or 'Auto'. Verify audio cable connections from the receiver to the subwoofer. Increase the volume control on the subwoofer. |
| ደካማ ወይም የተዛባ ባስ | Adjust the volume control and low-pass filter. Experiment with the phase toggle switch (0°/180°). Check for proper placement and ensure no obstructions are blocking the woofer or port. |
| ሰብዎፈር ጩኸት | Ensure all connections are secure. Try plugging the subwoofer into a different electrical outlet. If using line-level inputs, try a ground loop isolator. |
| ንዑስ ማወፈር በራስ-ሰር አይበራም | Ensure the 3-way power switch is set to 'Auto'. Increase the volume output from your receiver's subwoofer channel to ensure a strong enough signal for auto-on detection. |
ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| የሞዴል ስም | PSW10 |
| የድምጽ ማጉያ አይነት | Subwoofer |
| Subwoofer ዲያሜትር | 10 ኢንች |
| Ampቀጣይነት ያለው ኃይል ሊፈርስ | 50 ዋት |
| Amplifier Dynamic Power | 100 ዋት |
| ዝቅተኛ-ማለፊያ ክሮስኦቨር ድግግሞሽ | 80-160 Hz |
| ግብዓት Voltage | 120 ቮልት (ኤሲ) |
| የምርት ልኬቶች (WxHxD) | 14" x 14.38" x 16.12" |
| የእቃው ክብደት | 26 ፓውንድ £ |
| የግንኙነት ቴክኖሎጂ | Wired (Auxiliary) |
| ቀለም | ጥቁር |
Figure 3: Dimensions of the Polk Audio PSW10 Subwoofer.
ዋስትና እና ድጋፍ
Your Polk Audio PSW10 Powered Subwoofer comes with a የተወሰነ ዋስትና. For specific details regarding warranty coverage, terms, and conditions, please refer to the included Policy Documentation or visit the official Polk Audio website. For technical support or service inquiries, please contact Polk Audio customer service.
