Elitech RC-51 Digital Temperature Data Logger Instruction Manual

መግቢያ

The Elitech RC-51 is a reusable digital temperature data logger designed for precise and reliable temperature monitoring. It features a USB interface for direct connection to a computer, allowing for automatic PDF report generation without the need for specialized software. This device is capable of recording up to 32,000 temperature points across a wide range, making it suitable for various applications requiring accurate temperature data.

This manual provides comprehensive instructions for setting up, operating, and maintaining your RC-51 data logger.

ምርት አልቋልview

Figure 1: Elitech RC-51 Digital Temperature Data Logger

This image displays the Elitech RC-51 digital temperature data logger, showcasing its pen-style design with a transparent cap covering the USB connector and an integrated LCD screen.

ቁልፍ ባህሪዎች

• Reusable Temperature Data Logger: Capable of recording up to 32,000 temperature points.
• ሰፊ የሙቀት መጠን; Measures from -22℉ to 158℉ (-30°C to +70°C).
• ዩኤስቢ ይሰኩ እና ይጫወቱ፦ Automatically generates PDF reports upon connection to a PC, eliminating the need for software installation.
• LCD Visual Display: ተጠቃሚዎች ይፈቅዳል view current temperature, maximum/minimum values, current date, and logging points. Fahrenheit/Celsius units are switchable.
• Multiple Start Options: Start logging by button press, pre-set time, or start delay via Elitechlog software.
• የማንቂያ ቅንብሮች፡- Supports up to 5 alarm settings to monitor critical temperature thresholds.
• IP67 የውሃ መከላከያ ደረጃ Provides protection against dust and water ingress.

አካላት፡-

Figure 2: Labeled Components of the RC-51 Data Logger

This diagram labels the key components of the RC-51 data logger: 1. Transparent cap, 2. USB port, 3. LCD screen, 4. Seal ring, 5. Button & Bi-color indicator (red and green), 6. Temperature Sensor.

ማዋቀር

1. የባትሪ ጭነት

The RC-51 uses one Lithium Metal battery (included). Ensure the battery is correctly installed before initial use.

1. Carefully remove the back panel of the data logger.
2. Insert the Lithium Metal battery, ensuring correct polarity.
3. Replace the back panel securely.

2. Initial Configuration (Optional, via Software)

While the RC-51 can generate PDF reports without software, advanced settings like log interval, start mode, and alarm thresholds can be configured using the Elitechlog software. This software is available for both Windows and Mac platforms.

1. የኤልቴክሎግ ሶፍትዌርን ከኦፊሴላዊው የኤልቴክ ያውርዱ webጣቢያ.
2. Install the software on your computer (Windows or Mac).
3. Remove the transparent cap from the RC-51 and plug the data logger into a USB port on your computer.
4. Open the Elitechlog software. The device information should appear.
5. Navigate to the 'Settings' or 'Parameter' tab within the software.
6. Configure desired settings:
   • የምዝግብ ማስታወሻ ክፍተት፡- Set how frequently the device records data (e.g., every 10 seconds to every 12 hours).
   • የመነሻ ሁኔታ: Choose between 'Start by button-press', 'Start immediately', or 'Timer start' (pre-set time).
   • የሙቀት መለኪያ; Select Fahrenheit (℉) or Celsius (°C).
   • የሰዓት ሰቅ Adjust the time zone as needed.
   • የማንቂያ ቅንብሮች፡- Define up to 5 high and low temperature alarm thresholds.
7. Click 'Save' to apply the settings to the data logger.
8. Safely eject the data logger from your computer.

Operating the Data Logger

1. የውሂብ ምዝግብ ማስታወሻ መጀመር

Depending on your configured start mode:

• Button Press Start: Press and hold the left button (Play/Start) for 5 seconds until the play sign appears on the LCD.
• ወዲያውኑ ጅምር፡- If configured for immediate start, logging begins as soon as the device is unplugged from the computer after saving settings.
• የሰዓት ቆጣሪ ጅምር፡- Logging will begin automatically at the pre-set date and time.

2. Viewing Data on LCD

Press the left button (Play/Start) briefly to cycle through the following information on the LCD display:

• የአሁኑ ሙቀት
• Number of Logged Readings
• የአሁኑ ጊዜ
• የአሁኑ ቀን
• Maximum Temperature Recorded
• Minimum Temperature Recorded

3. የውሂብ ምዝግብ ማስታወሻን ማቆም

Depending on your configured stop mode:

• Button Press Stop: Press and hold the right button (Pause/Stop) for 5 seconds until the stop sign appears on the LCD.
• Software Stop: Logging can be stopped via the Elitechlog software when connected to a PC.
• Full Memory Stop: Logging automatically stops when the 32,000 data point memory is full.

4. Generating Reports

The RC-51 automatically generates a PDF report when plugged into a computer.

1. Remove the transparent cap and plug the data logger into a USB port on your computer.
2. The device will appear as a removable drive. A PDF file containing the data log will be automatically generated and saved to the device.
3. ፒዲኤፍ ይክፈቱ file ወደ view the temperature data, including a graph, statistics, and a table of all recorded points.
4. For Excel reports or further analysis, open the Elitechlog software, connect the device, and use the 'Export Data' function to save data in Excel format.

Figure 3: Automatic PDF Report Generation

This image illustrates the Elitech RC-51 data logger connected to a laptop, demonstrating its ability to automatically generate a PDF report without requiring additional software installation.

ጥገና

1. ማጽዳት

Wipe the device clean with a soft, dry cloth. Do not use abrasive cleaners or solvents.

2. የባትሪ መተካት

The RC-51 uses a replaceable Lithium Metal battery. If the battery indicator on the LCD is low or the device does not power on, replace the battery by following the installation steps in the 'Setup' section.

3. ማከማቻ

Store the data logger in a cool, dry place away from direct sunlight and extreme temperatures when not in use.

መላ መፈለግ

ዝርዝሮች

Figure 4: Elitech RC-51 Data Logger Dimensions

This image provides a visual representation of the RC-51 data logger's dimensions, indicating a length of approximately 3.14 inches and a width of 0.99 inches.

ዋስትና እና ድጋፍ

የዋስትና መረጃ

The Elitech RC-51 data logger typically comes with a manufacturer's warranty. Please refer to the included warranty card or the official Elitech website for specific terms and conditions regarding your product's warranty period and coverage.

ምስል 5: ዘፀample of a Two-year Validation Certificate

This image displays an example of a two-year validation certificate for an Elitech data logger, indicating calibration and expiration dates. A similar certificate may be included with your RC-51.

የቴክኒክ ድጋፍ

For technical assistance, troubleshooting, or inquiries regarding calibration certificates, please contact Elitech customer support. 24/7 US Technician Support is available via email and phone.

• ኢሜይል፡- Refer to your product packaging or the official Elitech webየእውቂያ ዝርዝሮች ጣቢያ።
• ስልክ፡ Refer to your product packaging or the Elitech webየእውቂያ ዝርዝሮች ጣቢያ።
• የመስመር ላይ መርጃዎች፡- Visit the Elitech webበተደጋጋሚ የሚጠየቁ ጥያቄዎች፣ የሶፍትዌር ማውረዶች እና ተጨማሪ የድጋፍ ቁሳቁሶች ጣቢያ።