SEBSON HF Motion Detector Instruction Manual

1. መግቢያ

This manual provides detailed instructions for the installation, operation, and maintenance of your SEBSON HF Motion Detector (Model 2_X_HF_CEIL_A). Please read this manual thoroughly before installation and use to ensure proper function and safety. Keep this manual for future reference.

ምስል 1.1፡ ፊት view of the SEBSON HF Motion Detector. This image shows the circular, white casing of the motion detector, designed for discreet ceiling surface mounting.

2. የደህንነት መመሪያዎች

• Installation must be performed by a qualified electrician in accordance with national wiring regulations.
• Disconnect power before installation or any maintenance.
• Do not exceed the maximum load capacity: 800W for incandescent lamps, 300W for LED or other energy-saving lamps.
• This device is designed for indoor use only (IP20 rating). Do not expose to moisture or extreme temperatures.
• Ensure the mounting surface is stable and can support the device.
• ልጆች በማይደርሱበት ቦታ ያስቀምጡ.

3. ምርት አብቅቷልview

The SEBSON HF Motion Detector utilizes high-frequency (HF) technology to detect movement within its coverage area. It is designed for ceiling surface mounting and offers adjustable settings for optimal performance in various indoor environments.

ቁልፍ ባህሪዎች

• High-Frequency Sensor: Detects movement through non-metallic objects like thin walls or doors.
• ሰፊ ሽፋን፡ 360° detection angle with a range of 2 to 16 meters.
• የሚስተካከሉ ቅንብሮች፡ Time delay (10 seconds to 12 minutes), sensitivity (detection range), and ambient light threshold (3-2000 lux).
• LED ተኳሃኝ፡ Supports up to 300W for LED lamps and 800W for incandescent lamps.
• የታመቀ ንድፍ Circular, white casing with dimensions of Ø100x22mm.

ምስል 3.1፡ አልቋልview of the motion detector highlighting its key specifications including detection range, LED compatibility, IP rating, time delay, lux range, and voltage.

4. ዝርዝሮች

Image 4.1: Technical drawing showing the dimensions of the motion detector: 100mm diameter and 22mm height.

5. መጫኛ (ማዋቀር)

ጠቃሚ፡- Ensure the main power supply is switched off before commencing installation.

1. ቦታ ይምረጡ፡- Select a suitable indoor ceiling location for surface mounting. Avoid placing near heat sources, air conditioning vents, or areas with significant air movement, which can interfere with detection.
2. ሽቦ ማዘጋጀት; ሐ ክፈትasing of the motion detector. You will find terminals for Live (L), Neutral (N), and Switched Live (L').
3. ተራራ መሰረት፡ Secure the base of the motion detector to the ceiling using appropriate screws and wall plugs. Ensure the cable entry points are aligned.
4. የሽቦ ግንኙነቶች;
   • Connect the incoming Live wire to the 'L' terminal.
   • Connect the incoming Neutral wire to the 'N' terminal.
   • Connect the Live wire to your light fixture (load) to the 'L'' terminal.
   • Connect the Neutral wire from your light fixture (load) to the 'N' terminal (shared with incoming neutral).
   

   ምስል 5.1፡ የኋላ view of the motion detector, illustrating the wiring terminals (L, N, L') and the three adjustable dials for TIME, SENS, and LUX settings.

5. ዝጋ ሐasing: Once wiring is complete and secure, reattach the main body of the detector to its base.
6. ኃይልን ወደነበረበት መልስ Switch on the main power supply. The detector will enter a warm-up period (typically 30-60 seconds) during which it may switch on and off randomly.

6. Operation and Settings Adjustment

The SEBSON HF Motion Detector features three adjustable dials to customize its operation:

• TIME (የጊዜ መዘግየት): Controls how long the connected light remains on after the last detected movement.
  • ከ 10 ሰከንድ እስከ 12 ደቂቃዎች የሚስተካከል.
  • Turn clockwise to increase the time delay, counter-clockwise to decrease.
• SENS (Sensitivity/Detection Range): Adjusts the detection range of the HF sensor.
  • Adjustable from 2 meters to 16 meters.
  • Turn clockwise for higher sensitivity (longer range), counter-clockwise for lower sensitivity (shorter range).
  • Consider the environment to avoid unwanted detections (e.g., through thin walls).
• LUX (Ambient Light Threshold): Determines the ambient light level at which the sensor will activate the connected light.
  • Adjustable from 3 lux (darkness) to 2000 lux (daylight).
  • Turn towards the sun icon for activation in brighter conditions (daylight).
  • Turn towards the moon icon for activation only in darker conditions (night).

ምስል 6.1፡ ዝርዝር view of the three rotary dials on the motion detector, labeled TIME, SENS, and LUX, used for fine-tuning operational parameters.

Image 6.2: A diagram showing the 360° detection pattern and adjustable range (2-16m) from a ceiling mount, along with visual representations of the LUX, SENS, and TIME adjustment dials.

7. ጥገና

The SEBSON HF Motion Detector requires minimal maintenance. Follow these guidelines:

• ማጽዳት፡ Gently wipe the surface of the detector with a soft, dry cloth. Do not use abrasive cleaners, solvents, or excessive moisture, as these can damage the device.
• ምርመራ፡- Periodically check for any visible damage to the casing or wiring. If any damage is found, disconnect power and consult a qualified electrician.
• የአካባቢ ሁኔታዎች; Ensure the operating environment remains within the specified indoor conditions (IP20).

8. መላ መፈለግ

9. ዋስትና እና ድጋፍ

SEBSON products are manufactured with quality and reliability in mind. For specific warranty details, please refer to the documentation provided at the time of purchase or visit the official SEBSON website. If you encounter any issues or require technical assistance, please contact SEBSON customer support through their official channels.

ለበለጠ መረጃ፡ ይጎብኙ፡- www.sebson.de