KuWFi 4G LTE Mobile WiFi Hotspot Travel Router

መግቢያ

The KuWFi 4G LTE Mobile WiFi Hotspot Travel Router (Model KF-M6) provides portable wireless internet access. This device allows you to share a 4G LTE connection with multiple devices simultaneously, making it suitable for travel, home, or business use. It supports standard SIM cards and offers a reliable Wi-Fi hotspot.

የጥቅል ይዘቶች

ከመጀመርዎ በፊት እባክዎ ሁሉም እቃዎች በጥቅልዎ ውስጥ መኖራቸውን ያረጋግጡ፡-

• 1 x KuWFi 4G LTE Travel Router (KF-M6)
• 1 x x rechargeable ባትሪ
• 1 x የዩኤስቢ ባትሪ መሙያ ገመድ
• 1 x የተጠቃሚ መመሪያ

ማዋቀር

Follow these steps to set up your KuWFi 4G LTE Mobile WiFi Hotspot:

1. ባትሪውን ይጫኑ; Remove the back cover of the device. Insert the provided 2000mAh Lithium-Ion battery into the battery compartment, ensuring the contacts align correctly.
2. ሲም ካርዱን ያስገቡ፡- With the battery removed, locate the standard SIM card slot. Carefully insert your activated standard SIM card into the slot until it clicks into place. Ensure the SIM card is oriented correctly as indicated on the device.
3. የኋላ ሽፋንን ይተኩ፡ የኋላ ሽፋኑን ደህንነቱ በተጠበቀ ሁኔታ እንደገና ያያይዙ።

4. አብራ፡ Press and hold the Power Key (usually located on the front or side) for a few seconds until the LED indicators light up.
5. ከWi-Fi ጋር ይገናኙ፡ On your computer, smartphone, or tablet, search for available Wi-Fi networks. Select the network name (SSID) displayed on the device's label (often found under the battery or on the back cover). Enter the Wi-Fi password (WIFI KEY) also found on the label.
6. መዳረሻ Web በይነገጽ (አማራጭ)፦ ክፈት ሀ web አሳሽ እና አስገባ http://192.168.1.1 into the address bar. The default login username is typically "admin" and the password is "admin" (or as specified on the device label). From here, you can configure advanced settings such as APN, Wi-Fi name, and password.
7. የAPN ቅንብሮችን አዋቅር፡ If the device does not connect to the internet automatically, you may need to manually configure the Access Point Name (APN) settings. Refer to your SIM card provider for the correct APN, dial number (e.g., *99#), and country settings.

መሣሪያውን በመሥራት ላይ

Understanding the device's indicators and functions:

• የ LED አመልካቾች The device features 4 LED lights that indicate signal strength, Wi-Fi status, SMS notifications, and battery level. Refer to the device's quick start guide for specific light patterns and their meanings.

• የWPS ተግባር፡- The device supports WPS (Wi-Fi Protected Setup) for easy connection to compatible devices without entering the password manually. Press the WPS key on the side of the router, then activate WPS on your client device within two minutes.

• Sharing Wi-Fi: The hotspot can support up to 10 users sharing the Wi-Fi connection simultaneously.
• የማይክሮ ኤስዲ ካርድ ማስገቢያ The device includes a Micro-SD card slot, supporting cards up to 32GB. Please note that as of current firmware, this slot may not support data sharing or function as a wireless drive.

ጥገና

Proper care ensures the longevity and performance of your device:

• በመሙላት ላይ፡ Charge the device using the provided Micro USB cable and a 5V DC, 1A charger. A full charge provides approximately 5-8 hours of working time.
• የባትሪ እንክብካቤ To maximize battery life, avoid extreme temperatures and do not leave the device fully discharged for extended periods.
• ማጽዳት፡ መሳሪያውን ለማጽዳት ለስላሳና ደረቅ ጨርቅ ይጠቀሙ። ፈሳሽ ማጽጃዎችን ወይም የማጽጃ ቁሳቁሶችን ከመጠቀም ይቆጠቡ።

መላ መፈለግ

ችግሮች ካጋጠሙዎት የሚከተሉትን መፍትሄዎች ይሞክሩ፦

• የበይነመረብ ግንኙነት የለም፡
  • ሲም ካርድዎ ንቁ መሆኑን እና የውሂብ ዕቅድ እንዳለው ያረጋግጡ።
  • Verify that the APN settings are correctly configured in the web በይነገጽ.
  • Check the signal strength LED indicator. If signal is weak, move to an area with better reception.
  • መሣሪያውን እንደገና ያስጀምሩ.
• Device Not Charging / Short Battery Life:
  • Ensure the USB cable and charger are functioning correctly and meet the 5V DC, 1A specification.
  • The device's battery life is rated for 5-8 hours. If significantly shorter, the battery may need replacement.
  • Note that the device may run warm during operation, which is normal.
• መድረስ አልተቻለም Web በይነገጽ፡
  • Ensure your device is connected to the hotspot's Wi-Fi network.
  • Confirm you are entering http://192.168.1.1 በትክክል።
  • የተለየ ይሞክሩ web አሳሽ.
• መሣሪያውን እንደገና ማስጀመር; If issues persist, you can perform a factory reset. Locate the reset button (often a small pinhole) and press it with a paperclip for about 5-10 seconds while the device is powered on. This will restore all settings to their factory defaults, including Wi-Fi name and password.

ዝርዝሮች

ዋስትና እና ድጋፍ

KuWFi provides lifelong technical support for this product. If you have any questions or require assistance, please contact KuWFi customer service through their official channels or the retailer where the product was purchased.