1. ምርት አብቅቷልview
The Flex LBE 17-11 125 is a powerful and high-quality angle grinder designed for cutting, deburring, and grinding tasks. It incorporates advanced features for enhanced performance, safety, and durability.
- Microprocessor Electronics: Features soft start, restart interlock after power failure, overload protection, and constant electronics (CDC) for consistent performance.
- ሜካኒካል ብሬክ፡ Ensures the tool stops quickly, within 3.5 seconds, for increased safety.
- Anti-Kickback Function: Automatically switches off the motor if the disc jams, preventing dangerous kickback.
- ከፍተኛ አቅም ያለው ሞተር; Designed for high load capacity and efficiency, delivering strong power output.
- Optimized Durability: Efficient air ducting and optimized carbon geometry contribute to a long service life.
- Dust Sealing: Sophisticated dust sealing protects the motor and gearbox from abrasive dust.
- Ergonomic ንድፍ; Compact and ergonomic form for comfortable handling.
- ከመሳሪያ ነጻ የሆነ የጥበቃ ማስተካከያ፡ The protective guard can be adjusted without the need for additional tools.
- SoftVib Handle: Features an integrated patented clamping nut wrench and vibration damping for reduced fatigue.
2. የደህንነት መመሪያዎች
Always observe general power tool safety warnings and specific instructions for angle grinders. Failure to follow these warnings and instructions may result in electric shock, fire, and/or serious injury.
አጠቃላይ ደህንነት
- የደህንነት መነፅሮችን፣ የመስማት ችሎታን መከላከልን፣ ጓንቶችን እና የአቧራ ጭንብልን ጨምሮ ሁል ጊዜ ተገቢውን የግል መከላከያ መሳሪያ (PPE) ይልበሱ።
- የ workpiece ደህንነቱ በተጠበቀ ሁኔታ cl መሆኑን ያረጋግጡampከቀዶ ጥገናው በፊት ተከናውኗል።
- Keep hands clear of rotating parts and the cutting/grinding area.
- እንደ ተቀጣጣይ ፈሳሾች፣ ጋዞች ወይም አቧራ ባሉ ፈንጂዎች ውስጥ መሳሪያውን አይጠቀሙ።
- የኤሌክትሪክ መሳሪያ በሚሰሩበት ጊዜ ልጆችን እና ተመልካቾችን ያርቁ።
የኤሌክትሪክ ደህንነት
- የኃይል አቅርቦቱን ጥራዝ ያረጋግጡtage matches the rating on the tool's nameplate.
- ገመዱን አላግባብ አይጠቀሙ. የኤሌክትሪክ መሳሪያውን ለመሸከም፣ ለመጎተት ወይም ለመንቀል ገመዱን በጭራሽ አይጠቀሙ። ገመዱን ከሙቀት፣ ዘይት፣ ሹል ጠርዞች ወይም ከሚንቀሳቀሱ ክፍሎች ያርቁ።
- በማስታወቂያ ውስጥ የኃይል መሣሪያ እየሠራ ከሆነamp መገኛ ቦታ የማይቀር ነው፣ ቀሪ የአሁኑን መሳሪያ (RCD) የተጠበቀ አቅርቦት ይጠቀሙ።
Specific Angle Grinder Safety
- Always use the protective guard. Ensure it is correctly positioned and securely fastened.
- Use only discs that are rated for the maximum speed of the grinder and are suitable for the material being worked on.
- Never use cutting discs for side grinding.
- Be aware of the anti-kickback feature; if the disc jams, the motor will shut off. Release the switch and clear the obstruction before restarting.
- Allow the disc to come to a complete stop using the mechanical brake before setting the tool down.
3. አካላት እና ባህሪዎች
ቁልፍ አካላት፡-
- ዋና አካል፡- Houses the motor, electronics, and gearbox.
- የመከላከያ ጠባቂ; Adjustable, tool-free guard for user protection.
- SoftVib Handle: Ergonomic side handle with vibration damping and integrated wrench.
- ስፒንል መቆለፊያ ቁልፍ፡ For easy disc changes.
- የስላይድ መቀየሪያ፡- Lockable for continuous operation.
- Speed Selection Dial: For variable speed control (see Figure 2).
- የአየር ማስገቢያ ቀዳዳዎች; For motor cooling and dust expulsion.
4. ማዋቀር
Attaching the SoftVib Handle
The SoftVib handle can be screwed into either the left or right side of the gearbox housing, depending on user preference and application. Ensure it is tightened securely.
የመከላከያ መከላከያ መትከል
The protective guard is tool-free adjustable. Position it to provide maximum protection for your specific task. Ensure it clicks securely into place.
Installing the Grinding/Cutting Disc
- Unplug the tool from the power supply.
- የስፒንድል መቆለፊያ ቁልፍን ተጭነው ይያዙ።
- ውስጣዊውን cl ያስቀምጡampበእንዝርት ላይ መወዛወዝ.
- Place the desired 125mm disc onto the inner flange, ensuring it sits flush.
- በ cl ላይ ያሽከርክሩamping nut (M14) and tighten it firmly using the integrated wrench in the SoftVib handle.
- የስፒንድል መቆለፊያ ቁልፍን ይልቀቁ።
5. የአሠራር መመሪያዎች
በማብራት / በማጥፋት ላይ
- To switch on, push the slide switch forward. For continuous operation, push it further forward until it locks into place.
- To switch off, release the slide switch. If locked, press the rear part of the switch to release it.
ተለዋዋጭ የፍጥነት መቆጣጠሪያ
The speed selection dial (Figure 2) allows you to adjust the no-load speed between 2800 and 11500 rpm. Select the appropriate speed for the material and application. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for cutting and grinding.
Using the Mechanical Brake
The integrated mechanical brake stops the disc within 3.5 seconds after the tool is switched off. This enhances safety by quickly stopping rotation.
Working with the Grinder
- መፍጫውን ሁል ጊዜ በሁለቱም እጆች አጥብቀው ይያዙ።
- Allow the tool to reach full operating speed before contacting the workpiece.
- Apply steady, even pressure. Do not force the tool, as this can lead to overheating or disc damage.
- For cutting, use a slight rocking motion to prevent the disc from binding.
- Be mindful of sparks and debris. Direct them away from yourself and others.
6. ጥገና
Regular maintenance ensures the longevity and safe operation of your Flex angle grinder.
ማጽዳት
- ከማጽዳትዎ በፊት ሁልጊዜ መሳሪያውን ይንቀሉ.
- Regularly clean the ventilation slots to prevent dust buildup, which can lead to overheating. Use compressed air if available.
- የመሳሪያውን ውጫዊ ክፍል በማስታወቂያ ይጥረጉamp ጨርቅ. ኃይለኛ ኬሚካሎችን ወይም ሻካራ ማጽጃዎችን አይጠቀሙ.
የካርቦን ብሩሾች
The optimized carbon geometry contributes to long brush life. If the tool's performance significantly drops or sparks excessively, the carbon brushes may need inspection or replacement. This should ideally be done by a qualified service technician.
ማከማቻ
Store the angle grinder in a dry, secure place, out of reach of children and unauthorized users.
7. መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| መሳሪያ አይጀምርም። | የኃይል አቅርቦት የለም። Restart interlock activated (after power failure) የተበላሸ የኃይል ገመድ | የኃይል ግንኙነትን ያረጋግጡ Unplug and re-plug the tool Inspect cord for damage; replace if necessary (by qualified personnel) |
| በሚሠራበት ጊዜ መሳሪያው ይቆማል | ከመጠን በላይ መጫን ጥበቃ ነቅቷል Disc jammed (anti-kickback activated) | Reduce pressure; allow tool to cool Release switch, clear obstruction, then restart |
| ከመጠን በላይ ንዝረት | Worn or damaged disc በትክክል ያልተጫነ ዲስክ የላላ እጀታ | ዲስክን ይተኩ Re-mount disc correctly, ensure clamping nut is tight Tighten SoftVib handle |
| Reduced performance / Excessive sparking | ያረጁ የካርቦን ብሩሽዎች Dust buildup in vents | Have brushes inspected/replaced by service center የአየር ማስገቢያ ቀዳዳዎችን በደንብ ያጽዱ |
8. ዝርዝሮች
| ባህሪ | ዋጋ |
|---|---|
| የሞዴል ቁጥር | 447668 |
| የኃይል ግቤት | 1700 ዋ |
| የኃይል ውፅዓት | 1050 ዋ |
| ጥራዝtage | 230 ቮ |
| ድግግሞሽ | 50/60 ኸርዝ |
| ከፍተኛ. የዲስክ ዲያሜትር | 125 ሚ.ሜ |
| ያለ ጭነት ፍጥነት | 2800-11500 ሩብ |
| Tool Holder (Angle Grinder) | M14 |
| የኬብል ርዝመት | 4 ሜ |
| ልኬቶች (L x W x H) | 340 x 77 x 105 ሚ.ሜ |
| ክብደት | 2.6 ኪ.ግ |
| ቀለም | Red, Black, Silver |
| ቁሳቁስ | ብረት |
9. ዋስትና እና ድጋፍ
Specific warranty details for this product may vary by region and retailer. Please refer to the warranty card included with your purchase or contact your point of sale for precise information.
Regarding spare parts availability, information is currently unavailable. For technical support, service, or inquiries about replacement parts, please contact Flex customer service or an authorized Flex service center in your region. Contact details can typically be found on the official Flex webጣቢያ ወይም በምርት ማሸጊያዎ ላይ።
