Intelbras IVP 2000 SF Wireless Passive Infrared Sensor Instruction Manual

1. መግቢያ

This manual provides comprehensive instructions for the installation, operation, and maintenance of the Intelbras IVP 2000 SF Wireless Passive Infrared Sensor. This device is designed to detect motion by sensing infrared radiation emitted by moving objects, providing an essential component for security systems.

2. የደህንነት መረጃ

• ከመጫንዎ እና ከመተግበሩ በፊት ሁሉንም መመሪያዎች በጥንቃቄ ያንብቡ.
• Do not expose the sensor to direct sunlight, extreme temperatures, or high humidity.
• Ensure the device is installed in a stable location to prevent accidental falls.
• Only use the specified battery type. Incorrect battery usage may cause damage or malfunction.
• መሣሪያውን ልጆች በማይደርሱበት ቦታ ያስቀምጡት.

3. የጥቅል ይዘቶች

ሁሉም እቃዎች በጥቅሉ ውስጥ መኖራቸውን ያረጋግጡ፡-

• 1x Intelbras IVP 2000 SF Wireless Passive Infrared Sensor
• 1x የመጫኛ ቅንፍ
• 1 x የዊንጮች እና የግድግዳ መሰኪያዎች ስብስብ
• 1x Battery (Alkaline)
• 1x Quick Start Guide (this manual)

4. ምርት አብቅቷልview

The Intelbras IVP 2000 SF is a wireless passive infrared sensor designed for indoor use. It features advanced detection technology to minimize false alarms and ensure reliable security monitoring.

ምስል 1፡ ፊት ለፊት view of the Intelbras IVP 2000 SF sensor. This image displays the white casing of the sensor with the Intelbras logo and "IVP 2000 SF" model designation clearly visible on the top front. The translucent detection lens is prominent on the lower front section.

ቁልፍ አካላት፡-

• PIR Lens: Detects infrared radiation from moving bodies.
• የ LED አመልካች፡- Provides status feedback (e.g., detection, low battery).
• የባትሪ ክፍል፡ የኃይል ምንጭን ይይዛል።
• የመጫኛ ነጥቦች፡ For secure installation on a wall.
• Tampቀይር ፦ Triggers an alarm if the sensor cover is opened.

5. ማዋቀር

5.1. የባትሪ ጭነት

1. Open the sensor's front cover by gently prying it open from the bottom notch.
2. Insert the provided alkaline battery into the battery compartment, observing the correct polarity (+/-).
3. Close the front cover, ensuring it clicks securely into place.

5.2. ዳሳሹን መጫን

The sensor is designed for wall mounting. Choose a location that provides optimal coverage of the area to be protected, avoiding direct heat sources or air conditioning vents.

1. Select a mounting height between 2.0 to 2.2 meters (6.5 to 7.2 feet) from the floor.
2. በግድግዳው ላይ ያሉትን የጠመዝማዛ ቦታዎችን ምልክት ለማድረግ የመጫኛ ቅንፍ እንደ አብነት ይጠቀሙ።
3. ምልክት በተደረገባቸው ቦታዎች ላይ ቀዳዳዎችን ይከርሙ እና የግድግዳውን መሰኪያዎች ያስገቡ.
4. የተገጠሙትን ዊንጮችን በመጠቀም ግድግዳውን ከግድግዳው ጋር ያስቀምጡት.
5. Attach the sensor unit to the mounting bracket, ensuring it is firmly seated.

5.3. Pairing with a Security System

Refer to your Intelbras security system or smart hub manual for specific instructions on how to add a new wireless sensor. Generally, the process involves:

1. Putting your security system into "pairing" or "enrollment" mode.
2. Activating the sensor (e.g., by triggering it or pressing a specific button, if available, or by installing the battery for the first time).
3. Confirming successful pairing through the system's interface or LED indicators.

6. ዳሳሹን መስራት

6.1. Detection Principle

The IVP 2000 SF sensor operates on the principle of passive infrared (PIR) detection. It detects changes in infrared energy within its field of view, which are typically caused by the movement of a warm body. When a significant change is detected, the sensor transmits a signal to the connected security system.

6.2. የ LED አመልካች ሁኔታ

• Brief Flash: የእንቅስቃሴ መለየትን ያመለክታል።
• Continuous Flash: May indicate low battery or a fault. Refer to the troubleshooting section.
• ብርሃን የለም፡ Normal standby mode, or battery is completely depleted.

6.3. Detection Range and Coverage

The sensor typically offers a detection range of up to 12 meters (39 feet) with a coverage angle of approximately 90 degrees. Optimal performance is achieved when movement occurs across the sensor's field of view rather than directly towards it.

7. ጥገና

7.1. ማጽዳት

Periodically clean the sensor's lens and casing with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the device.

7.2. የባትሪ መተካት

When the LED indicator signals a low battery (e.g., continuous flashing or specific system notification), replace the battery promptly. Follow the battery installation steps outlined in section 5.1. Dispose of old batteries according to local regulations.

7.3. መደበኛ ቼኮች

Test the sensor's functionality regularly (e.g., monthly) by walking through its detection zone to ensure it triggers an alarm or notification on your security system.

8. መላ መፈለግ

9. ዝርዝሮች

• የምርት ስም፡ ኢንቴልብራስ
• ሞዴል፡ IVP2000SF
• የኃይል ምንጭ፡- በባትሪ የተጎላበተ
• የባትሪ ዓይነት፡ አልካላይን
• የመጫኛ አይነት፡ የግድግዳ መሰኪያ
• ተስማሚ መሣሪያዎች Intelbras security systems and smart home hubs
• የምርት መጠኖች: በግምት 17 x 10 x 9 ሴሜ (6.7 x 3.9 x 3.5 ኢንች)
• የማወቂያ ዘዴ፡- ተገብሮ ኢንፍራሬድ (PIR)
• የመለየት ክልል፡ እስከ 12 ሜትር (39 ጫማ)
• የማወቂያ አንግል፡ በግምት 90 ዲግሪዎች
• የአሠራር አካባቢ; የቤት ውስጥ አጠቃቀም ብቻ

10. የዋስትና መረጃ

Intelbras products are covered by a limited warranty. For detailed warranty terms and conditions, please refer to the official Intelbras webጣቢያ ወይም የደንበኛ ድጋፍን ያግኙ። ለዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።

11. ድጋፍ

If you encounter any issues or have questions regarding your Intelbras IVP 2000 SF sensor that are not covered in this manual, please contact Intelbras customer support through their official channels:

• Webጣቢያ፡ Visit the official Intelbras webጣቢያ ለድጋፍ ምንጮች፣ የሚጠየቁ ጥያቄዎች እና የእውቂያ መረጃ።
• ስልክ፡ Refer to the contact section on the Intelbras webለአካባቢያዊ ድጋፍ ቁጥሮች ጣቢያ.