1. ምርት አብቅቷልview
The Einhell CE-BC 6 M is an intelligent, microprocessor-controlled battery charger designed for a wide range of 12V vehicle battery types, including gel, AGM, and maintenance-free/low-maintenance lead-acid batteries. This advanced charger features a multi-stage charging cycle, automatic voltage adaptation (12V), and specialized modes for optimal battery care. Its intelligent electronics analyze the connected battery's type and condition to initiate the most suitable charging process, ensuring a gentle and efficient charge for extended battery life.
Key features include a maintenance charge function to prevent deep discharge, a Winter Mode for charging below 5°C, a Recondition Mode for deeply discharged batteries, and a Power Supply Mode. The unit is equipped with comprehensive safety protections against overload, short circuits, and reverse polarity, safeguarding both the charger and the battery. An LCD display provides real-time information on battery voltagሠ እና ክፍያ ሂደት.

Figure 1: Einhell CE-BC 6 M Battery Charger. The device is predominantly red and black, featuring an LCD display that shows '13.4V' and a battery charge indicator. Attached are red and black insulated battery clamps, ready for connection. The top of the unit has a black hanging eyelet for convenient storage.
2. የደህንነት መመሪያዎች
Before operating the Einhell CE-BC 6 M battery charger, please read and understand all safety instructions. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- የግል ደህንነት; Always wear eye protection and protective clothing when working with batteries. Batteries can produce explosive gases.
- የአየር ማናፈሻ; Ensure the charging area is well-ventilated. Do not operate the charger in a confined space.
- ተቀጣጣይ ቁሶች; ብልጭታዎችን፣ ነበልባሎችን እና የማጨስ ቁሳቁሶችን ከባትሪው እና ከቻርጀሩ ያርቁ።
- የባትሪ ዓይነት፡ This charger is designed for 12V lead-acid, gel, and AGM batteries. Do not attempt to charge non-rechargeable batteries or batteries with different voltagሠ ደረጃ አሰጣጦች
- Frozen Batteries: Never attempt to charge a frozen battery. Allow it to thaw before charging.
- ግንኙነቶች፡ Always connect the charger to the battery before plugging it into the mains power supply. Disconnect from the mains before disconnecting the battery.
- የተጎዱ መሳሪያዎች; Do not operate the charger if the power cord, clamps, or charger unit itself is damaged. Contact qualified service personnel for repair.
- ልጆች እና የቤት እንስሳት; ባትሪ መሙያውን እና ባትሪውን ህፃናት እና የቤት እንስሳት በማይደርሱበት ቦታ ያስቀምጡ.
- የተገላቢጦሽ ዋልታ; The charger has reverse polarity protection, but always double-check connections to prevent damage.
3. ማዋቀር እና ዝግጅት
- ማሸግ ፦ ባትሪ መሙያውን እና ሁሉንም መለዋወጫዎች ከማሸጊያው ላይ በጥንቃቄ ያስወግዱት።
- መርምር፡ ቻርጀሩን፣ ኬብሎቹን እና ክላሉን ያረጋግጡampለማንኛውም የጉዳት ምልክቶች s። ከተበላሸ አይጠቀሙ።
- የአየር ማናፈሻ; ቻርጀሩን ከፀሐይ ብርሃን፣ ከሙቀት ምንጮች እና ከእርጥበት ርቆ በሚገባ አየር በሚተነፍስበት ቦታ ያስቀምጡት።
- የባትሪ ዝግጅት፡
- For conventional lead-acid batteries, check the electrolyte level and top up with distilled water if necessary (do not overfill).
- Clean the battery terminals to ensure good electrical contact.
- Ensure the battery is not frozen.
- መጫን (አማራጭ) The charger housing includes an eyelet for wall mounting, allowing for convenient storage and use.
4. የአሠራር መመሪያዎች
4.1. ባትሪ መሙያውን በማገናኘት ላይ
- አዎንታዊ ግንኙነት; Attach the red (+) battery clamp ወደ ባትሪው አወንታዊ (+) ተርሚናል.
- አሉታዊ አገናኝ፡ Attach the black (-) battery clamp ወደ ባትሪው አሉታዊ (-) ተርሚናል.
- ከዋናው ጋር ይገናኙ; Plug the charger's power cord into a standard 230V AC wall outlet. The charger will power on and perform an initial self-check.
4.2. የኃይል መሙያ ሁነታን መምረጥ
The Einhell CE-BC 6 M automatically detects the battery type and condition. Use the mode button (if present, or refer to the display for automatic selection) to cycle through available modes if manual selection is required for specific functions.
- መደበኛ ክፍያ፡- The charger will automatically select the appropriate multi-stage charging cycle for 12V batteries.
- Winter Mode (below 5°C): Activates a specialized charging curve for optimal performance in cold temperatures.
- የመልሶ ማቋቋም ሁነታ; Designed to revive deeply discharged batteries. This mode applies a specific charging profile to attempt recovery.
- የኃይል አቅርቦት ሁኔታ፡- Allows the charger to function as a stable 12V power supply, useful for maintaining vehicle electronics during battery changes or diagnostics.
4.3. Monitoring the Charging Process
የኤልሲዲ ማሳያው በእውነተኛ ጊዜ መረጃ ይሰጣል፦
- ባትሪ ቁtage: የአሁኑን ጥራዝ ያሳያልtage ከተገናኘው ባትሪ።
- የኃይል መሙላት ሂደት፡- የአሁኑን stage of the charging cycle.
- ሁነታ አመልካች፡- Displays the active charging mode (e.g., Winter, Recondition).
- የባትሪ ሁኔታ፡- A graphical representation of the battery's charge level.
The charger will automatically switch to maintenance charge mode once the battery is fully charged, preventing overcharging and maintaining optimal battery health.
4.4. ቻርጀሩን ማቋረጥ
- Disconnect Mains: Unplug the charger's power cord from the wall outlet.
- Disconnect Negative: Detach the black (-) battery clamp from the negative (-) terminal of the battery.
- Disconnect Positive: Detach the red (+) battery clamp from the positive (+) terminal of the battery.
5. ጥገና እና ማከማቻ
- ማጽዳት፡ Disconnect the charger from the mains and battery before cleaning. Wipe the exterior with a soft, dry cloth. Do not use solvents or abrasive cleaners.
- የኬብል ምርመራ; Regularly inspect the power cord and battery cables for any signs of damage, fraying, or exposed wires. Replace damaged cables immediately.
- Clamp እንክብካቤ፡ የባትሪውን ክሊፕ ይያዙamps clean and free of corrosion to ensure good electrical contact.
- ማከማቻ፡ Store the charger in a cool, dry place, away from direct sunlight and moisture. Ensure cables are neatly coiled and not kinked.
- የረጅም ጊዜ ማከማቻ; If the charger is not used for an extended period, ensure it is stored in its original packaging or a protective container.
6. መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ባትሪ መሙያ አይበራም። | No power from mains outlet. የተበላሸ የኤሌክትሪክ ገመድ. | Check the wall outlet with another appliance. Inspect power cord for damage; do not use if damaged. |
| ባትሪ እየሞላ አይደለም። | የተሳሳተ የባትሪ ግንኙነት። Battery is severely discharged or faulty. ትክክል ያልሆነ ሁነታ ተመርጧል። | Cl ን ያረጋግጡamps are securely connected to correct terminals. Try Recondition Mode for deeply discharged batteries. If still no charge, battery may be beyond recovery. Verify the correct charging mode is active on the LCD display. |
| "Error" or warning on display. | የተገላቢጦሽ የፖላሪቲ ግንኙነት። አጭር ዙር። ከመጠን በላይ መጫን. | Disconnect from mains, then reconnect clampበትክክል (ከቀይ እስከ +፣ ከጥቁር እስከ -)። Check for short circuits in cables or clamps. Ensure battery capacity is within charger's specifications. |
| ባትሪ መሙያ በሚሠራበት ጊዜ ይሞቃል. | መደበኛ ክወና. | A slight increase in temperature is normal during charging. Ensure adequate ventilation. If excessively hot, disconnect and contact support. |
7. ቴክኒካዊ ዝርዝሮች
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| የምርት ስም | አይንሄል |
| የሞዴል ቁጥር | 1002235 (CE-BC 6 M) |
| ግብዓት Voltage | 120 ቮልት (ኤሲ) |
| የውጤት ቁtage | 12 ቮልት (ዲሲ) |
| የአሁኑን ኃይል መሙላት | 6 Ampኢሬስ |
| ተስማሚ የባትሪ ዓይነቶች | Lead-acid, Gel, AGM (12V) |
| ልኬቶች (L x W x H) | 34 ሴሜ x 15 ሴሜ x 8 ሴ.ሜ |
| የእቃው ክብደት | 1.32 ፓውንድ (በግምት 0.6 ኪ.ግ) |
| የማገናኛ አይነት | ባትሪ ክሊamps |
| ዓለም አቀፍ የጽሑፍ ኮድ (ኢኤን) | 04006825640328 |
8. ዋስትና እና ድጋፍ
Einhell products are manufactured to high-quality standards and undergo strict quality controls. This product is covered by a manufacturer's warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell webጣቢያ.
It is recommended to register your product for warranty purposes, which may extend the warranty period (e.g., to 3 years as mentioned in some product information). Keep your proof of purchase for any warranty claims.
የደንበኛ ድጋፍ
For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer service. Contact details can typically be found on the official Einhell webጣቢያ ወይም በምርቱ ሰነድ ውስጥ.
ድጋፍ በሚያገኙበት ጊዜ፣ እባክዎ የሚከተለውን መረጃ ያዘጋጁ፡-
- Product Model: CE-BC 6 M
- የአንቀጽ ቁጥር፡ 1002235
- የተገዛበት ቀን
- የጉዳዩ መግለጫ





