Einhell Power X-Change Cordless Miter Saw TE-SM 36/210 Li User Manual

1. መግቢያ

This user manual provides essential information for the safe and efficient operation, setup, and maintenance of your Einhell Power X-Change TE-SM 36/210 Li Cordless Miter Saw. As part of the Power X-Change series, this saw offers unparalleled flexibility and freedom from cords, making it ideal for various woodworking tasks, including miter and cross cuts, and even cutting parquet flooring to length.

Please read this manual thoroughly before using the tool to ensure proper handling and to maximize its performance and lifespan.

Figure 1: The Einhell TE-SM 36/210 Li Cordless Miter Saw, a versatile tool for precise cuts.

2. የደህንነት መመሪያዎች

Always prioritize safety when operating power tools. Failure to follow these instructions may result in serious injury or damage to the tool.

• የግል መከላከያ መሳሪያዎችን (PPE) ይልበሱ፦ ሁልጊዜ የደህንነት መነፅሮችን፣ የመስማት ችሎታን መከላከል እና የአቧራ ጭንብል ይልበሱ።
• ደህንነቱ የተጠበቀ የስራ ክፍል cl ይጠቀሙamping device to firmly hold the workpiece in place before cutting.
• ንፁህ የስራ ቦታን ይጠብቁ; የስራ ቦታውን ከቆሻሻ እና በደንብ ብርሃን ይጠብቁ።
• Bladeን ፈትሽ፡ Ensure the saw blade is sharp, clean, and correctly installed before each use.
• ከመጠን በላይ መድረስን ያስወግዱ; ትክክለኛውን እግር እና ሚዛን ሁል ጊዜ ይጠብቁ።
• ኃይልን አቋርጥ፡ ማናቸውንም ማስተካከያዎችን ከማድረግዎ, መለዋወጫዎችን ከመቀየርዎ ወይም መሳሪያውን ከማጠራቀምዎ በፊት ሁልጊዜ የባትሪውን መያዣ ያስወግዱ.
• የአቧራ አስተዳደር; Utilize the dust bag or connect to a dust extractor to minimize airborne dust.

3. ማዋቀር

3.1 የባትሪ ጭነት

The TE-SM 36/210 Li operates on the Einhell Power X-Change system, requiring two 18V batteries (36V total) for optimal performance. It is recommended to use at least two 2.5 Ah PXC Plus rechargeable batteries.

1. መጋዙ መጥፋቱን ያረጋግጡ።
2. Align the battery packs with the battery slots on the saw.
3. Slide the battery packs into the slots until they click securely into place.
4. To remove, press the release button on each battery and slide them out.

Figure 2: Proper installation of the Power X-Change batteries into the saw.

3.2 X-Tend Table Extension

The saw features X-Tend supports that can be adjusted with one hand and without tools, providing stable support for wider workpieces.

1. Locate the X-Tend supports on either side of the main table.
2. Pull the supports outwards to extend them to the desired length.
3. Ensure the workpiece is fully supported across the extended table for stability and accurate cuts.

Figure 3: Extending the X-Tend table for supporting longer workpieces.

3.3 የአቧራ ስብስብ

The saw comes with a sawdust bag and an adapter for connecting an external dust extractor, helping to keep your workspace clean.

• Attach the provided sawdust bag to the dust port at the rear of the saw.
• For more efficient dust extraction, connect a compatible dust extractor hose to the adapter.

4. የአሠራር መመሪያዎች

4.1 ማብራት / ማጥፋት

To start the saw, press the main power switch. Release the switch to turn off the saw.

4.2 Using LED Light and Laser Line

The integrated LED light and laser line ensure precise cuts, even in challenging lighting conditions.

1. Locate the LED and Laser switches on the saw's handle.
2. Press the respective buttons to activate the LED light for illumination and the laser line for guiding your cut.

Figure 4: The laser line provides a clear guide for accurate cutting.

4.3 Adjusting Angle Cuts (Miter)

The turntable allows for precise angle adjustments for miter cuts, ranging from -47° to +47°.

1. Loosen the locking mechanism for the turntable.
2. Rotate the turntable to the desired angle, indicated by the scale.
3. Securely tighten the locking mechanism before making a cut.

Figure 5: The turntable allows for precise angle adjustments for miter cuts.

4.4 Adjusting Bevel Cuts

The saw head can be tilted up to 45° to the left for bevel cuts.

1. Loosen the bevel adjustment knob.
2. የመጋዝ ጭንቅላትን ወደሚፈለገው ማዕዘን ያዙሩት.
3. Tighten the knob to lock the head in position.

4.5 የተንሸራታች ተግባር

The smooth-running drag function is suitable for wider workpieces, allowing the saw head to slide forward and backward during the cut.

1. የ workpiece ደህንነቱ በተጠበቀ ሁኔታ cl መሆኑን ያረጋግጡampእትም።
2. Lower the saw blade slightly into the workpiece.
3. Push the saw head forward through the material, then pull it back to complete the cut.

4.6 የመቁረጥ አቅም

The cutting capacity varies based on the battery capacity and the material being cut. The Power X-Change system allows for different battery sizes to be used, affecting the number of cuts per charge.

Figure 6: Approximate cutting capacity for laminated wood (195 x 8 mm) per battery charge.

Figure 7: Approximate cutting capacity for square wood (60 x 60 mm) per battery charge.

For optimal results, it is recommended to use higher capacity Power X-Change batteries.

4.7 የምርት ቪዲዮ

Watch the official product video for a visual guide on the features and operation of the Einhell TE-SM 36/210 Li Cordless Miter Saw.

5. ጥገና

መደበኛ ጥገና የማተሚያ መጋዝዎ ረጅም ዕድሜ እና ጥሩ አፈፃፀም ያረጋግጣል።

• ማጽዳት፡ After each use, clean the saw thoroughly, especially around the blade area and dust port, to prevent sawdust buildup. Use a brush or compressed air.
• የቢላ መተካት፡ Replace worn or damaged saw blades promptly. Always use a blade compatible with the saw's specifications and intended material. Refer to the blade replacement instructions in the full manual for detailed steps.
• ቅባት፡ Periodically lubricate moving parts as recommended in the comprehensive manual to ensure smooth operation of the sliding mechanism and angle adjustments.
• ማከማቻ፡ መጋዙን በደረቅና ደህንነቱ በተጠበቀ ቦታ፣ ህጻናት በማይደርሱበት ቦታ ያከማቹ።

6. መላ መፈለግ

ይህ ክፍል ከማጥመጃ መጋዝዎ ጋር ሊያጋጥሙዎት የሚችሉ የተለመዱ ችግሮችን ያብራራል።

If you encounter issues not listed here, please refer to the complete product manual or contact Einhell customer support.

7. ዝርዝሮች

8. ዋስትና እና ድጋፍ

For warranty information, please refer to the documentation provided with your purchase or visit the official Einhell website. For technical support, spare parts, or service inquiries, please contact Einhell customer service directly.

Spare parts availability: Information unavailable.

You can find more information and contact details on the official Einhell webጣቢያ፡ www.einhell.com