1. መግቢያ
Thank you for choosing the JFA Power Supply and Charger. This manual provides essential information for the safe and efficient operation of your device. Please read it thoroughly before use and retain it for future reference.
1.1 የደህንነት መረጃ
- የኃይል አቅርቦቱን ሁልጊዜ ከመሬት መውጫ ጋር ያገናኙ።
- መሳሪያውን ለእርጥበት ወይም ለከፍተኛ የሙቀት መጠን አያጋልጡ.
- ከመጠን በላይ ሙቀትን ለመከላከል ትክክለኛ የአየር ዝውውርን ያረጋግጡ.
- ማንኛውንም ጥገና ወይም ጽዳት ከማከናወንዎ በፊት ኃይልን ያላቅቁ።
- ክፍሉን እራስዎ ለመክፈት ወይም ለመጠገን አይሞክሩ። ብቁ የሆኑ የአገልግሎት ባለሙያዎችን ይመልከቱ።
2. ምርት አብቅቷልview
The JFA Power Supply and Charger is designed to provide stable power and efficiently charge batteries. It features an intelligent charging system (SCI) to optimize battery life and performance.
2.1 ክፍሎች

- ዲጂታል ማሳያ: የእውነተኛ ጊዜ ጥራዝ ያሳያልtage or current readings.
- ጥራዝtage Indicator LEDs: Indicate the current voltagሠ ደረጃ።
- Current Indicator LEDs: Indicate the current ampእርጅና።
- Reading Mode Selector: Button to switch between voltage and current display.
- Operation Mode Selector: Button to select different operating modes or charging profiles.
- Charge Indicator LEDs: Show the battery's charge status (e.g., 15%, 50%, 80%, Full).
- የማቀዝቀዝ አድናቂ፡ Located on the side for thermal management.
- የውጤት ተርሚናሎች Connectors for power output and battery charging.

3. የማዋቀር መመሪያዎች
3.1 ማሸግ
Carefully remove the JFA Power Supply and Charger from its packaging. Inspect the unit for any signs of damage during transit. If damage is found, do not use the device and contact customer support.
3.2 አቀማመጥ
Place the unit on a stable, flat surface in a well-ventilated area. Ensure there is sufficient space around the cooling fan for unrestricted airflow. Avoid placing it near heat sources or in direct sunlight.
3.3 ከኃይል ጋር መገናኘት
- የኃይል አቅርቦቱ መጥፋቱን ያረጋግጡ።
- Connect the AC power cord to the power supply unit.
- Plug the other end of the AC power cord into a standard, grounded electrical outlet.
3.4 Connecting to Battery/Load
- Identify the positive (+) and negative (-) output terminals on the JFA Power Supply and Charger.
- Connect the positive (+) cable from your battery or load to the red (+) terminal on the power supply.
- Connect the negative (-) cable from your battery or load to the black (-) terminal on the power supply.
- ሁሉም ግንኙነቶች ደህንነታቸው የተጠበቀ እና ከአጭር ዑደት የፀዱ መሆናቸውን ያረጋግጡ።
4. የአሠራር መመሪያዎች
4.1 ማብራት / ማጥፋት
- To power on, flip the main power switch to the "ON" position. The digital display and indicator LEDs will illuminate.
- ለማጥፋት ዋናውን የኃይል ማብሪያ / ማጥፊያ ወደ "ጠፍቷል" ቦታ ያዙሩት።
4.2 Displaying Voltagሠ እና ወቅታዊ
የሚለውን ተጠቀም Reading Mode Selector button on the control panel to toggle between displaying the output voltage and the output current on the digital display. The corresponding indicator LED (Tensão for Voltage, Corrente for Current) will light up to show the active display mode.
4.3 ባትሪ መሙላት
- Ensure the battery is correctly connected to the output terminals as described in Section 3.4.
- በመሣሪያው ላይ ኃይል።
- Select the appropriate charging mode using the የአሠራር ሁኔታ መምረጫ button. Refer to the device's specific charging profiles if available (e.g., "Auto SCI 14.4V").
- መከታተል የኃይል መሙያ አመልካች LEDs to track the battery's charging progress (15%, 50%, 80%). The "Bateria Carregada" (Battery Charged) LED will illuminate when charging is complete.
- Once fully charged, you may disconnect the battery or leave it connected for maintenance charging if the unit supports it.
5. ጥገና
5.1 ጽዳት
Before cleaning, ensure the unit is powered off and disconnected from the AC outlet and any connected batteries/loads. Use a soft, dry cloth to wipe the exterior of the unit. Do not use liquid cleaners or solvents, as they may damage the finish or internal components. Keep the cooling fan vents clear of dust and debris.
5.2 ማከማቻ
When not in use for extended periods, store the power supply in a cool, dry place, away from direct sunlight and extreme temperatures. Ensure it is disconnected from all power sources.
6. መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ዩኒት ኃይል የለውም። | No AC power; Power switch off; Faulty power cord. | Check AC outlet and power cord connection; Ensure power switch is ON; Try a different power cord. |
| የውጤት ጥራዝ የለምtagሠ/የአሁኑ። | Incorrect connections; Overload protection activated. | Verify positive and negative connections; Reduce load or disconnect battery, then restart the unit. |
| ባትሪ እየሞላ አይደለም። | Battery deeply discharged; Incorrect charging mode; Faulty battery. | Allow more time for charging; Select appropriate charging mode; Test battery with another charger or replace if necessary. |
| የክፍል ሙቀት መጨመር። | የአየር ማናፈሻ መዘጋት፤ ከመጠን በላይ ጭነት። | Ensure cooling fan vents are clear; Reduce connected load. |
7. ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| የምርት ስም | ጄኤፍኤ |
| የሞዴል ቁጥር | 7898554804334 |
| የእቃው ክብደት | 5.57 ፓውንድ |
| የምርት ልኬቶች (LxWxH) | 15.75 x 7.87 x 7.87 ኢንች |
| ቀለም | ጥቁር |
| አምራች | ጄኤፍኤ ኤሌክትሮኒክስ |
| ASIN | B07YN8LG3R |
8. ዋስትና እና ድጋፍ
For warranty information or technical support, please refer to the documentation included with your purchase or visit the official JFA webጣቢያ. ለዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።
ማስታወሻ፡ የተወሰኑ የዋስትና ውል እና ሁኔታዎች እንደ ክልል እና ቸርቻሪ ሊለያዩ ይችላሉ።





