መግቢያ
The Klein Tools 935DAG Digital Electronic Level and Angle Gauge is a versatile tool designed for precise angle measurement. It can be used to measure or set angles, check relative angles, or function as a digital level. Its strong magnetic base allows for attachment to ferromagnetic surfaces, and the dual measurement ranges (0-90 degrees and 0-180 degrees) accommodate various applications. The high-visibility reverse contrast display ensures easy reading in diverse lighting conditions.
Figure 1: Klein Tools 935DAG Digital Electronic Level and Angle Gauge.
ባህሪያት
- ሁለገብ ተግባራዊነት፡ Measures and sets angles, checks relative angles, and operates as a digital level.
- ከፍተኛ የታይነት ማሳያ፦ Reverse contrast display for improved readability in low-light conditions.
- ራስ-ሰር የሚሽከረከር ማሳያ; Screen automatically rotates when the unit is upside down for convenient viewing
- ጠንካራ መግነጢሳዊ መሠረት; Securely attaches to ferromagnetic surfaces such as conduit, pipes, and saw blades for hands-free operation.
- V-Groove Edges: Designed for optimal alignment on conduits and pipes.
- ሰፊ የመለኪያ ክልል፡ Capable of measuring angles between 0-90 degrees and 0-180 degrees.
- Water and Dust Resistant: IP42 rating provides protection against water and dust.
- ተንቀሳቃሽ ንድፍ; Compact size with included soft carrying case for easy transport.
ማዋቀር
የባትሪ ጭነት
The Klein Tools 935DAG requires two AAA batteries (included). To install or replace batteries:
- በመሳሪያው ጀርባ ላይ የባትሪውን ክፍል ሽፋን ያግኙ.
- በባትሪው ሽፋን ላይ ያለውን ዊንጣ ለማላቀቅ ትንሽ ዊንዳይ ይጠቀሙ.
- Remove the cover and insert two AAA batteries, ensuring correct polarity (+/-).
- የባትሪውን ሽፋን ይተኩ እና ጠመዝማዛውን ያጥብቁ።
ኃይል አብራ/ አጥፋ
Press the red power button (labeled with a circle and vertical line) to turn the unit ON or OFF.
Figure 2: Included accessories: soft carrying case and AAA batteries.
የአሠራር መመሪያዎች
Basic Angle Measurement
To measure an absolute angle:
- Place the gauge on a flat, level surface.
- Press the 'ZERO' button to calibrate the unit to 0.0 degrees.
- Place the gauge on the surface or object you wish to measure. The display will show the angle relative to the calibrated zero.
Figure 3: Calibrating the gauge to 0.0 degrees on a flat surface.
Relative Angle Measurement
To measure the angle between two surfaces:
- Place the gauge on the first surface.
- Press the 'ZERO' button. The display will show 0.0 degrees, establishing this as your reference angle.
- Move the gauge to the second surface. The display will now show the angle difference between the first and second surfaces.
Figure 4: Measuring a relative angle on a wooden beam.
ተግባርን ያዝ
Press the 'HOLD' button to freeze the current measurement on the display. This is useful when measuring in hard-to-see areas. Press 'HOLD' again to release the measurement.
Figure 5: Display showing the 'HOLD' function active.
በራስ-ሰር የሚሽከረከር ማሳያ
The display automatically rotates 180 degrees when the unit is inverted, ensuring the reading is always upright and easy to view, regardless of the gauge's orientation.
Figure 6: The auto-rotating display for easy viewing
Magnetic Base and V-Grooves
The strong magnetic base allows the gauge to adhere to ferromagnetic surfaces, providing hands-free operation. The V-groove edges on all four sides ensure stable placement and optimal alignment on curved surfaces like pipes and conduits.
Figure 7: Utilizing V-groove edges for alignment on conduit.
Figure 8: Gauge magnetically attached to a pipe.
Figure 9: Gauge on a table saw blade for precise angle adjustment.
ጥገና
ማጽዳት
Wipe the unit with a clean, dry cloth. Do not use abrasive cleaners or solvents. Ensure the unit is dry before storage.
የባትሪ መተካት
Replace batteries when the low battery indicator appears on the display. Follow the battery installation steps in the Setup section.
መላ መፈለግ
| ጉዳይ | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ማሳያ አይበራም። | የሞቱ ወይም በስህተት የተጫኑ ባትሪዎች | ባትሪዎችን ይተኩ, ትክክለኛውን ፖሊነት ያረጋግጡ. |
| ትክክለኛ ያልሆኑ ንባቦች | Unit not calibrated to zero | Recalibrate to 0.0 degrees on a known flat surface. |
| ማሳያው 'Err' ያሳያል | Internal error or extreme angle | Turn the unit off and on again. Ensure the angle is within the 0-180 degree range. |
ዝርዝሮች
| ዝርዝር መግለጫ | ዝርዝር |
|---|---|
| የምርት ስም | የ KLEIN መሳሪያዎች |
| የሞዴል ቁጥር | 935 DAG |
| ቁሳቁስ | ABS Plastic Housing and Electronic Components |
| ቀለም | Multi (typically orange and black) |
| የምርት ልኬቶች | 2.36"ኤል x 2.2" ዋ |
| የእቃው ክብደት | 3.5 አውንስ |
| የክወና ሁነታ | አውቶማቲክ |
| የመለኪያ ክልሎች | 0-90 Degrees, 0-180 Degrees |
| ልዩ ባህሪያት | V-grooves Around Entire Perimeter, Reverse Contrast Display, Magnetic Base |
| ባትሪዎች | 2 AAA ባትሪዎች (ተጨምሯል) |
| የአይፒ ደረጃ አሰጣጥ | IP42 (የአቧራ እና የውሃ መቋቋም) |
ዋስትና እና ድጋፍ
የዋስትና መረጃ
This product is covered by a Manufacturer Warranty. Please refer to the warranty documentation included with your purchase for specific terms and conditions.
የደንበኛ ድጋፍ
For technical assistance, troubleshooting, or warranty claims, please contact Klein Tools customer support through their official webበምርት ማሸጊያዎ ውስጥ የቀረበው ጣቢያ ወይም የእውቂያ መረጃ።
