Tyger Auto 3.5" Rider Running Boards Installation and User Manual

ምርት አልቋልview

The Tyger Auto 3.5" Rider Running Boards are designed to provide a secure and convenient step for entering and exiting your vehicle. These running boards feature a durable construction with a textured black finish for enhanced grip and corrosion resistance. They are specifically engineered for the specified vehicle models to ensure a precise fit and straightforward installation.

Image: Pair of Tyger Auto 3.5" Rider Running Boards with textured black finish.

ተኳኋኝነት

These running boards are compatible with the following vehicle models:

• 2005-2023 Toyota Tacoma Access Cab

Important Cab Size Note: These running boards are designed exclusively for Access Cab models, which feature 2 full-size front doors and 2 rear suicide doors. They are አይደለም compatible with Double Cab models (4 full-size doors) or Regular Cab models (2 full doors).

Image: Visual guide illustrating Regular Cab, Access Cab, and Double Cab configurations for Toyota Tacoma, highlighting Access Cab as compatible.

ማዋቀር እና መጫን

Installation of the Tyger Auto Rider Running Boards is designed to be a straightforward bolt-on process, requiring no drilling for most applications. The package includes all necessary hardware and brackets for mounting onto the vehicle's rocker panel.

የተካተቱ አካላት፡-

• የአሽከርካሪው የጎን መሮጫ ሰሌዳ
• የተሳፋሪ የጎን መሮጫ ሰሌዳ
• Mounting brackets (specific to vehicle model)
• All necessary bolts, washers, and nuts

የመጫኛ ደረጃዎች

1. አዘገጃጀት፥ Ensure your vehicle is parked on a level surface and the engine is off. Gather all tools required (typically a wrench set).
2. የመጫኛ ነጥቦችን መለየት; Locate the factory pre-drilled holes on the vehicle's rocker panel or frame. These are where the mounting brackets will attach.


ምስል፡ መቀራረብ view of pre-drilled thread holes on the vehicle's underside, indicating mounting points for brackets.

3. ቅንፎችን አያይዝ፡ Secure the appropriate mounting brackets to the vehicle's frame using the provided hardware. Do not fully tighten bolts at this stagማስተካከያ እንዲደረግ ለመፍቀድ e.


ምስል: ከስር view showing a running board bracket bolted to the vehicle frame.

4. Mount Running Boards: Carefully position the running boards onto the attached brackets. Align the holes on the running boards with the holes on the brackets. Insert the remaining hardware.
5. ማስተካከል እና ማጠንከር፦ Adjust the position of the running boards and brackets to ensure proper alignment and desired spacing from the vehicle body. Once satisfied with the positioning, fully tighten all bolts to secure the running boards.
6. የመጨረሻ ፍተሻ፡- Verify that both running boards are securely attached and stable before driving.

Installation typically takes approximately 20 minutes.

የአሠራር መመሪያዎች

The Tyger Auto Rider Running Boards provide a stable and wide stepping surface to assist with vehicle entry and exit. The 3.5-inch wide step pad features a non-slip surface for enhanced stability.

ምስል፡ መቀራረብ view illustrating the 3.5-inch width of the running board step surface.

የክብደት አቅም;

• Each running board has a maximum weight limit of 300 ፓውንድ. Exceeding this limit may compromise the integrity of the running board and its mounting system.

ጥገና

ተገቢ የሆነ ጥገና የሩጫ ሰሌዳዎችዎን ረጅም ዕድሜ እና ገጽታ ያረጋግጣል።

ማጽዳት፡

• Regularly clean the running boards with mild soap and water to remove dirt, mud, and road grime.
• Avoid using abrasive cleaners, harsh chemicals, or stiff brushes, as these can damage the textured powder coat finish.
• የውሃ ቦታዎችን ለመከላከል በንጹህ ውሃ በደንብ ያጠቡ እና ለስላሳ ጨርቅ ያድርቁ.

የዝገት መከላከያ;

The running boards feature an E-coating and heavy textured powder finish designed to resist rust and corrosion. This multi-layer protection helps to keep moisture and dirt away from the carbon steel structure.

Image: Diagram showing the three layers of protection: pre-treatment, special E-coating, and dual-stage textured black powder coat.

Image: Running board in a rainy environment, emphasizing its rust-resistant E-coating and textured black finish.

ምርመራ፡-

• Periodically inspect all mounting hardware for tightness. Re-tighten any loose bolts to ensure the running boards remain secure.
• Check for any signs of damage or wear on the running boards or step pads.

መላ መፈለግ

የመጫን ጉዳዮች፡-

• Misaligned Brackets/Holes: If brackets do not align perfectly with vehicle holes, ensure all bolts are kept loose during initial assembly. This allows for minor adjustments to align components before final tightening. Verify that the correct brackets are used for each position (front, middle, rear).
• Difficulty with Threaded Holes: For older vehicles, factory threaded holes may accumulate rust or debris. It may be necessary to clean or re-tap these holes before installation.
• Incorrect Cab Type: Double-check that your vehicle is an Access Cab. These running boards are not designed for Double Cab or Regular Cab models, and attempting to install them on an incompatible cab type will result in fitment issues. Refer to the compatibility section and image for clarification.

አጠቃላይ ጉዳዮች

• Loose Running Boards: If running boards feel unstable, inspect all mounting bolts and re-tighten them to the recommended torque specifications.
• ያልተለመዱ ድምፆች; Rattling or squeaking may indicate loose hardware. Inspect and tighten all connections.

ዝርዝሮች

ዋስትና እና ድጋፍ

የዋስትና መረጃ፡-

Tyger Auto provides a የ 5 ዓመት ዋስትና for US customers against manufacturing defects for this product. Please retain your proof of purchase for warranty claims.

የደንበኛ ድጋፍ፡

For technical assistance, warranty claims, or any product-related inquiries, please visit the official Tyger Auto store or contact their customer service department.

Tyger Auto Official Store: Visit Tyger Auto Store on Amazon