መግቢያ
The LAUNCH CRP129 Premium is a professional diagnostic tool designed for automotive technicians and enthusiasts. It provides comprehensive diagnostic capabilities for four major vehicle systems: Engine, Transmission (A/T), Anti-lock Braking System (ABS), and Supplemental Restraint System (SRS/Airbag). This device supports all 10 test modes of OBD II, including enhanced OBD II Mode 6, and offers advanced reset functions for Oil Service Light, Electronic Parking Brake (EPB), Steering Angle Sensor (SAS), and Battery Management System.
With its intuitive interface, 4.0-inch TFT full-color display, and robust design, the CRP129 Premium allows users to efficiently read and clear diagnostic trouble codes (DTCs), view live data streams, freeze frame data, and I/M readiness status. It supports a wide range of vehicle makes and models, providing a powerful solution for diagnosing drive-ability issues and performing essential maintenance tasks.
የጥቅል ይዘቶች
- 1x LAUNCH CRP129 Premium Diagnostic Tool
- 1x OBDII Cable
- 1 x የኃይል መሙያ ገመድ (ዩኤስቢ)
- 1 x ተሸካሚ ቦርሳ
- 1 x የተጠቃሚ መመሪያ (ይህ ሰነድ)
ማዋቀር እና የመጀመሪያ አጠቃቀም
Follow these steps to set up and begin using your CRP129 Premium diagnostic tool:
- የ OBD-II ወደብ ያግኙ፡ The OBD-II (On-Board Diagnostics II) port is typically located under the dashboard on the driver's side of the vehicle. Refer to your vehicle's owner's manual if you cannot locate it.
- Connect the OBDII Cable: Plug one end of the provided OBDII cable into the 16-pin connector on the CRP129 Premium device.
- ከተሽከርካሪ ጋር ይገናኙ፡ Plug the other end of the OBDII cable into the vehicle's OBD-II port. The device will power on automatically, drawing power directly from the vehicle's battery.
- አብራ፡ Once connected, the CRP129 Premium will power on. The screen will display the LAUNCH logo and then the main menu.
- የቋንቋ ምርጫ፡- If prompted, select your preferred language (English, Spanish, or French are supported).

Image: The CRP129 Premium diagnostic tool being held and connected to a vehicle's OBD-II port, illustrating the setup process.
የአሠራር መመሪያዎች
The CRP129 Premium features a user-friendly interface with a 4.0-inch color display and intuitive button operation. Use the directional pad (up, down, left, right) to navigate menus, the "OK" button to confirm selections, and the "ESC" button to go back.

ምስል፡ ፊት ለፊት view of the CRP129 Premium, highlighting its display and navigation buttons for operation.
የምርመራ ተግባራት
- የስርዓት ቅኝት፡- Select "Diagnose" from the main menu. The tool will automatically identify the vehicle and scan for available systems (Engine, Transmission, ABS, SRS).
- ኮዶችን ያንብቡ Displays current, pending, and permanent Diagnostic Trouble Codes (DTCs) for the selected system. Each code comes with a brief description.
- ኮዶችን አጽዳ፡ Erases DTCs from the vehicle's computer. Ensure the underlying issue is resolved before clearing codes to prevent them from reappearing.
- የቀጥታ የውሂብ ዥረት Displays real-time data parameters from the vehicle's sensors. Data can be viewed in numerical or graphical format. Key parameters include engine speed, vehicle speed, coolant temperature, O2 sensor position, MAF/airflow, and short/long term fuel trims.
- የፍሬም ውሂብ እሰር DTC በተዘጋጀበት ጊዜ የዳሳሽ ውሂብ ቅጽበታዊ ገጽ እይታን ይይዛል፣ ይህም ለምርመራ ጠቃሚ መረጃ ይሰጣል።
- የI/M ዝግጁነት ሁኔታ፡- ተሽከርካሪው ለልቀቶች ምርመራ ዝግጁ መሆኑን ለማወቅ ከልቀት ጋር የተያያዙ ተቆጣጣሪዎች ሁኔታን ይፈትሻል።
- Enhanced OBD II Mode 6: Provides access to test results for non-continuously monitored systems.
ተግባራትን ዳግም አስጀምር
The CRP129 Premium offers several special reset functions:
- Oil Service Light Reset: Resets the oil maintenance light after an oil change.
- Electronic Parking Brake (EPB) Release: Allows for safe deactivation and reactivation of the electronic parking brake system for brake pad replacement.
- Steering Angle Sensor (SAS) Reset: Calibrates the steering angle sensor after steering system repairs or alignment.
- የባትሪ ዳግም ማስጀመር; Performs battery registration or adaptation after replacing the vehicle's starter battery.
የሶፍትዌር ዝማኔዎች
The CRP129 Premium supports lifetime free internet updates via USB 2.0. To update the software:
- Visit the official LAUNCH website (refer to the device's packaging or back label for the exact URL).
- Download and install the update tool software on your PC.
- Connect the CRP129 Premium to your PC using the provided USB cable.
- Follow the on-screen instructions in the update tool to download and install the latest software versions for your device.
ጥገና እና እንክብካቤ
- ማጽዳት፡ መሳሪያውን ለማጽዳት ለስላሳ እና ደረቅ ጨርቅ ይጠቀሙ. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን አይጠቀሙ.
- ማከማቻ፡ Store the device in its carrying bag in a cool, dry place away from direct sunlight and extreme temperatures.
- የኬብል እንክብካቤ; Avoid bending or twisting the OBDII cable excessively. Always grasp the connector when plugging or unplugging.
- የሶፍትዌር ማሻሻያ Regularly check for and install software updates to ensure optimal performance and compatibility with new vehicle models.
መላ መፈለግ
If you encounter issues with your CRP129 Premium, consider the following common troubleshooting steps:
- መሳሪያ አይበራም
- Ensure the OBDII cable is securely connected to both the device and the vehicle's OBD-II port.
- የተሽከርካሪው ማብራት በበራ ቦታ ላይ መሆኑን ያረጋግጡ (ሞተሩ ሊጠፋ ይችላል)።
- Check the vehicle's fuse for the OBD-II port (usually labeled "CIGAR" or "ACC").
- የግንኙነት ስህተት፡-
- Confirm the vehicle supports the OBD-II standard (most vehicles from 1996 onwards).
- ማቀጣጠያው በርቶ መሆኑን ያረጋግጡ።
- ተሽከርካሪ-ተኮር ችግርን ለማስወገድ ከተለየ ተሽከርካሪ ጋር ለመገናኘት ይሞክሩ።
- በ OBDII ገመድ ውስጥ ያሉ ማንኛውንም የተዘጉ ግንኙነቶችን ያረጋግጡ።
- የተሳሳቱ ንባቦች/ኮዶች፡-
- ሶፍትዌሩ ወቅታዊ መሆኑን ያረጋግጡ።
- Verify the vehicle information (VIN, year, make, model) is correctly identified by the tool.
For persistent issues, refer to the official LAUNCH support resources or contact their customer service.
ቴክኒካዊ ዝርዝሮች

Image: The back of the CRP129 Premium device, displaying its technical specifications label.
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| ማሳያ | 4.0" TFT full color display |
| ጥራዝtagሠ ክልል | 12Vdc (via OBD interface) |
| የአሠራር ሙቀት | ከ0°ሴ እስከ 50°ሴ (32°F እስከ 122°F) |
| የማከማቻ ሙቀት | -20°ሴ እስከ 70°ሴ (-4°F እስከ 158°ፋ) |
| መጠኖች | 196 x 106 x 32 ሚ.ሜ |
| ክብደት | በግምት. 680 ግ |
| ግንኙነት | Standardized 16-pin OBD connector, USB 2.0 |
| የሚደገፉ ፕሮቶኮሎች | J1850 PWM, J1850 VPW, ISO9141-2, ISO14230-4, ISO 15765 (CAN) |
| ቀለም | ቀይ |
| አምራች | Launch Tech |
ድጋፍ እና ዋስትና
For technical support, product inquiries, or warranty information, please contact LAUNCH customer service. Details can typically be found on the official LAUNCH webድህረ ገጽ ወይም የምርት ማሸጊያ። የግዢ ደረሰኝዎን የዋስትና ጥያቄዎችን ለማቅረብ የግዢ ማረጋገጫ አድርገው ያስቀምጡት።
Regular software updates are available for free to ensure your device remains compatible with the latest vehicle models and diagnostic protocols.





