KING KB ECO2S+ 5KW 240V Electronic Garage Heater Instruction Manual

1. መግቢያ

The KING KB ECO2S+ series unit heater provides efficient and user-friendly heating for various spaces. This model, KB2405-1-ECO2S-PLUS, features a 5KW / 240V power output, 2-stage heating, and an integrated electronic thermostat with a remote control and remote temperature sensor for optimal comfort and energy savings. It is designed for use as primary or supplemental heat sources in warehouses, stores, or large garages.

ቁልፍ ባህሪዎች

• Smart ECO2S+ Energy-Saving Design
• 2-ሰtage Heating: Automatically uses the lowest wattage needed for heating.
• Includes ECO2S+ Remote Temperature Sensor for precise temperature monitoring.
• Built-In Provision for Optional 24V Remote Thermostat, compatible with NEST and other 24V Wi-Fi thermostats.
• Integrated fan-only and timer modes.
• Spiral steel elements and high CFM for even air distribution and prolonged heater life.
• Universal wall/ceiling bracket for simple installation.

2. ጠቃሚ የደህንነት መረጃ

Read all instructions before installing or using this heater. Failure to follow these instructions may result in electric shock, fire, property damage, or personal injury.

• የኤሌክትሪክ ደህንነት; Installation must be performed by a qualified electrician in accordance with all applicable local, state, and national electrical codes. Ensure the power supply is disconnected before any service or installation.
• መጫን፡ Securely mount the heater using the provided universal bracket to a structural support capable of holding the unit's weight. Maintain proper clearances from combustible materials as specified in the installation section.
• ተግባር፡- Do not operate the heater with the grill removed. Do not block air inlets or outlets. Keep flammable materials away from the heater.
• ጥገና፡- ከማጽዳትዎ በፊት ወይም ማንኛውንም ጥገና ከማድረግዎ በፊት ኃይልን ያላቅቁ።

3. የጥቅል ይዘቶች

ጥቅሉን ሲከፍቱ ሁሉም እቃዎች መኖራቸውን እና ያልተበላሹ መሆናቸውን ያረጋግጡ፡

• KING KB ECO2S+ Unit Heater (5KW / 240V)
• Universal Wall/Ceiling Mounting Bracket
• የርቀት መቆጣጠሪያ
• ECO2S+ Remote Temperature Sensor
• Heavy-Duty Pigtail (for electrical connection)
• Installation Hardware (lag bolts, nuts, grommet)
• የተጠቃሚ መመሪያ

This image displays the main heater unit, a black remote control, a white remote temperature sensor, and a grey universal mounting bracket, all included in the product package.

4. መጫን

4.1 ማሞቂያውን መትከል

The universal mounting bracket allows for both wall and ceiling installation. Ensure the mounting surface is structurally sound to support the heater's weight (approximately 40 lbs). Use appropriate lag bolts or expansion bolts provided in the hardware pack.

1. Attach the universal bracket to the desired wall or ceiling location using appropriate fasteners.
2. Align the heater unit with the bracket and secure it using the large knobs on the sides, allowing for angle adjustment.
3. Adjust the heater angle to direct airflow as needed. The bracket offers four adjustable positions.

This image shows the back of the grey heater unit with a protective grill covering the fan. Mounting holes are visible on the sides for attaching the universal bracket.

4.2 የኤሌክትሪክ ሽቦ

This heater requires a 240V dedicated circuit. Installation must be performed by a licensed electrician. The 5KW model typically requires a 40-amp breaker and 4-8 AWG copper wire. Ensure all local electrical codes are followed.

1. ኃይልን አቋርጥ፡ Turn off power at the main circuit breaker before beginning any wiring.
2. የመዳረሻ ሽቦ ክፍል፡ Locate and remove the single Phillips screw on the side panel to open the wiring compartment.
3. Remove Knockout: Select an appropriate knockout on the side of the heater for your wiring. Use pliers to remove the knockout.
4. Install Strain Relief: Insert the provided grommet with integral strain relief into the knockout hole.
5. ሽቦዎችን ማገናኘት;
   • Connect the black wire to the L1 terminal.
   • Connect the red wire to the L2 terminal.
   • Connect the green (ground) wire to the grounding screw.
   Ensure all wires are securely tightened and that no insulation is under the terminals.
6. ደህንነቱ የተጠበቀ ሽቦ; Tighten the strain relief to prevent the wire from pulling out and to protect the wiring from damage.
7. ክፍል ዝጋ፡ Reattach the access panel with the Phillips screw.
8. ኃይልን ወደነበረበት መልስ በዋናው የወረዳ ተላላፊ ላይ ኃይልን ያብሩ።

This image shows the internal wiring compartment of the heater with various colored wires connected to terminals (L1, L2, and ground) and a circuit board. A label indicates "Red Wire L2" and "Black Wire L1" for 240V, 4-8AWG connections.

4.3 External Thermostat Switch

On the back of the heater, there is a toggle switch to select between the built-in thermostat (setting I) and an external thermostat (setting II). For most applications using the integrated controls, ensure the switch is set to 'I'. If connecting to an external 24V thermostat (e.g., Nest), set the switch to 'II' and ensure proper wiring by a licensed electrician.

5. የአሠራር መመሪያዎች

5.1 የመጀመሪያ ኃይል-አፕ

Upon initial power-up, the unit will beep, and the display will show the current room temperature. This indicates correct voltagሠ እና የኃይል አቅርቦት.

5.2 የመቆጣጠሪያ ፓነል እና የርቀት መቆጣጠሪያ

The heater can be operated via the integrated control panel or the included remote control. The remote control offers convenient access to all functions from a distance.

This image shows the front of the grey heater unit with horizontal louvers and a digital control panel at the bottom. The control panel has buttons for Power, Mode, Start/Stop, and Up/Down arrows, along with a digital temperature display.

5.3 የአሠራር ሁነታዎች

ያሉትን የአሠራር ሁነታዎች ለማለፍ የ'ሞድ' አዝራሩን ይጫኑ፡

• ዝቅተኛ ሙቀት; Provides a lower heat output.
• ኢኮ ሁነታ፡ Automatically adjusts wattage to the lowest level needed to maintain the set temperature, optimizing energy efficiency.
• ደጋፊ ብቻ፡- Circulates air without heating, useful for summer or general ventilation.
• ከፍተኛ ሙቀት; ከፍተኛውን የሙቀት መጠን ያቀርባል.

5.4 የሙቀት ማስተካከያ

Use the Up/Down arrow buttons on the control panel or remote to set your desired temperature. The heater will maintain this temperature automatically.

5.5 የሰዓት ቆጣሪ ተግባር

The timer mode allows you to set the heater to run for a predetermined length of time, after which it will automatically shut off. This feature helps conserve energy and provides convenience.

6. ጥገና

መደበኛ ጥገና የማሞቂያዎን ጥሩ አፈጻጸም እና ረጅም ጊዜ ያረጋግጣል። ማንኛውንም ጥገና ከማከናወንዎ በፊት ሁልጊዜ ኃይልን ያላቅቁ።

• ማጽዳት፡ የማሞቂያውን ውጫዊ ክፍል በየጊዜው ለስላሳ በሆነ ጨርቅ ያጽዱ፣amp cloth. Ensure the air inlets and outlets are free from dust and debris. Do not use abrasive cleaners or solvents.
• ምርመራዎች፡- Annually inspect electrical connections for tightness and signs of wear. Check the mounting bracket for security.
• አድናቂ Ensure the fan operates smoothly and is free from obstructions.

7. መላ መፈለግ

If your heater is not functioning correctly, refer to the following common issues and solutions:

8. ዝርዝሮች

• የምርት ስም፡ ንጉሥ
• ሞዴል፡ KB2405-1-ECO2S-PLUS
• የኃይል ውፅዓት፡- 5 ኪ.ወ
• ጥራዝtage: 240 ቪ
• Ampዕድሜ 20.8 Amps
• የፍጥነት ብዛት፡- 2 (ዝቅተኛ፣ ከፍተኛ)
• የነዳጅ ዓይነት፡- ኤሌክትሪክ
• ልዩ ባህሪያት፡ Energy Efficient, Remote Control, Remote Temperature Sensor, 2-Stage ማሞቂያ
• ቀለም፡ ጥቁር
• የቅጽ ምክንያት፡ ካቢኔ
• የቤት ውስጥ/የውጭ አጠቃቀም፡- የቤት ውስጥ
• የመጫኛ አይነት፡ Wall Mount (Universal bracket included)
• የምርት መጠኖች: 16.5 x 15 x 13.5 ኢንች
• የእቃው ክብደት፡ 40 ፓውንድ
• ዩፒሲ፡ 093319332399
• መጀመሪያ የሚገኝ፡- ሴፕቴምበር 29፣ 2020

This chart provides guidance on selecting the appropriate heater wattage based on garage size (1-car to 4-car garages), square footage, BTU, CFM, and amperage. The 5KW model is suitable for 1-car garages up to 450 sq. ft.

9. ዋስትና እና ድጋፍ

For specific warranty details, please refer to the documentation included with your product or contact KING customer support. General product protection plans may be available for purchase separately.

• ይመልሳል፡ This product typically offers a 30-day easy return policy.
• የጥበቃ እቅዶች፡- Optional 4-Year Protection Plans and Complete Protect monthly plans may be available for extended coverage.
• የደንበኛ ድጋፍ፡ For technical assistance or service inquiries, please visit the KING store on Amazon or refer to the contact information provided in your product packaging.

Visit the official KING Store for more information: KING Store