1. ምርት አብቅቷልview
The Rittal 1280.000 Wall-mounted AX Enclosure is a robust carbon steel enclosure designed for industrial and IT infrastructure applications. It features an innovative 25 mm system grid, allowing for flexible and easy installation of internal components and accessories without the need for drilling, thereby maintaining its protection class. This enclosure is suitable for various environments, offering NEMA 1, 3R, 4, and 12 protection.
ቁልፍ ባህሪዎች
- ቁሳቁስ፡ Carbon steel construction.
- መጠኖች፡- 47.2 inches (Height) x 31.5 inches (Width) x 11.8 inches (Depth).
- ጥበቃ፡ NEMA 1, 3R, 4, 12 rated for environmental protection.
- System Grid: Integrated 25 mm system grid for versatile interior finishing.
- በር፡ Features an all-round foamed-in PU seal for enhanced protection.
- የመወጣጫ ወለል Zinc-plated, measuring 29.3 inches x 46.3 inches.
2. የደህንነት መረጃ
Please read and understand all safety instructions before installing or operating the Rittal AX Enclosure. Failure to follow these instructions may result in injury, damage to the product, or voiding of the warranty.
- የኤሌክትሪክ ደህንነት; Ensure all power is disconnected before working inside the enclosure. Only qualified personnel should perform electrical installations.
- ክብደት፡ The enclosure weighs approximately 140 pounds. Use appropriate lifting equipment and techniques to prevent injury during handling and installation.
- ሹል ጫፎች፡ Exercise caution when handling the enclosure and its components, as some edges may be sharp. Wear appropriate personal protective equipment (PPE), including gloves.
- መጫን፡ Ensure the mounting surface is structurally sound and capable of supporting the total weight of the enclosure and its contents.
3. የጥቅል ይዘቶች
Upon receiving your Rittal AX Enclosure, carefully inspect the packaging for any signs of damage. Open the package and verify that all components are present:
- Enclosure housing with door(s)
- Flange (gland) plate(s) in the enclosure base
- ሰሃን መስቀያ
- በቡጢ የተነጠፈ በር
- መቆለፊያ: 3 ሚሜ ድርብ-ቢት
- የመመሪያ መመሪያ እና ሰነዶች
If any items are missing or damaged, contact Rittal customer support immediately.
ቪዲዮ፡ Unboxing and initial inspection of the Rittal AX Enclosure, demonstrating the removal of packaging and identification of components.
4. ማዋቀር እና መጫን
The Rittal AX Enclosure is designed for straightforward installation. Follow these steps for proper mounting and initial setup:
4.1. የግድግዳ መወጣጫ
- የመጫኛ ወለል ያዘጋጁ; Ensure the wall is clean, dry, and capable of supporting the enclosure's weight. Mark the desired mounting points.
- የመጫኛ ቅንፎችን አያይዝ፡ Secure the appropriate mounting brackets (not included, sold separately) to the rear of the enclosure using the designated attachment points.
- ማንሳት እና ደህንነቱ የተጠበቀ; Carefully lift the enclosure into position. Align the mounting brackets with the marked points on the wall and secure the enclosure using appropriate fasteners. Ensure the enclosure is level and firmly attached.
- መረጋጋትን ያረጋግጡ፡ After mounting, gently test the enclosure's stability to confirm it is securely fastened to the wall.
ቪዲዮ፡ Demonstrates various installation methods for the Rittal AX Enclosure, including wall mounting and pole mounting, highlighting the secure fastening process.
4.2. Internal Component Installation
The AX enclosure features an integrated 25 mm system grid for flexible interior finishing. This allows for easy installation and retrofitting of system components and accessories without drilling, preserving the enclosure's protection class.
- Access the Interior: Open the enclosure door using the 3 mm double-bit lock.
- የመጫኛ ሳህን ጫን The zinc-plated mounting plate is pre-installed. If removed for external work, re-install it securely.
- Utilize System Grid: Attach internal rails, mounting plates, and other accessories directly to the embossed enclosure cams in the roof, base, and side sections. Use self-tapping screws for secure fastening while maintaining UL compliance.
- የኬብል አስተዳደር Plan cable routing to ensure proper organization and prevent interference with components or the door seal.
ቪዲዮ፡ Illustrates the installation of internal components and accessories within the Rittal AX Enclosure, showcasing the flexibility of the 25 mm system grid.
5. ኦፕሬሽን
Operating the Rittal AX Enclosure primarily involves accessing its interior for maintenance or modifications. The door is secured with a 3 mm double-bit lock.
- በሩን መክፈት; Insert a 3 mm double-bit key into the lock and turn to unlock. Pull the door open.
- በሩን መዝጋት; Push the door firmly shut until it engages with the frame. Turn the key to lock the door. Ensure the door is fully closed and locked to maintain the specified protection class.
ምስል፡ ፊት ለፊት view of the Rittal AX Enclosure, showing the door and the 3 mm double-bit lock mechanism.
6. ጥገና
Regular maintenance ensures the longevity and continued protection offered by your Rittal AX Enclosure.
- ማጽዳት፡ Clean the exterior surfaces with a soft cloth and mild detergent. Avoid abrasive cleaners or solvents that could damage the textured paint finish.
- የማኅተም ምርመራ፡ Periodically inspect the all-round foamed-in PU seal on the door for any signs of wear, cracks, or damage. A compromised seal can reduce the enclosure's protection rating. Replace damaged seals promptly.
- የመቆለፊያ ዘዴ; Lubricate the lock mechanism annually with a suitable lubricant to ensure smooth operation.
- ማያያዣ ቼክ፡ Periodically check all mounting fasteners and internal component fasteners for tightness. Re-tighten as necessary.
7. መላ መፈለግ
This section addresses common issues you might encounter with your Rittal AX Enclosure.
- ጉዳይ፡- Door does not close or seal properly.
መፍትሄ፡- Check the door seal for obstructions or damage. Ensure the hinges are properly aligned and the lock mechanism is functioning correctly. - ጉዳይ፡- Enclosure feels unstable after mounting.
መፍትሄ፡- Verify that all mounting fasteners are securely tightened and that the wall or mounting surface is adequate for the load. Consult a structural engineer if concerns persist. - ጉዳይ፡- Difficulty installing internal components.
መፍትሄ፡- Ensure you are using compatible Rittal system accessories designed for the 25 mm grid. Refer to the specific accessory's instructions for proper installation.
8. ዝርዝሮች
Detailed technical specifications for the Rittal 1280.000 Wall-mounted AX Enclosure:
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| የሞዴል ቁጥር | 1280.000 |
| ቁሳቁስ | የካርቦን ብረት |
| ልኬቶች (H x W x D) | 47.24" x 31.5" x 11.81" |
| የመጫኛ ሰሌዳ ልኬቶች | 29.3" x 46.3" |
| Material Thickness (Door) | 0.08" |
| Material Thickness (Enclosure) | 0.06" |
| Material Thickness (Mounting Plate) | 0.1" |
| የጥበቃ ደረጃ | NEMA 1፣ 3R፣ 4፣ 12 |
| ቀለም | ፈካ ያለ ግራጫ |
| ክብደት | 140 ፓውንድ £ |
ምስል፡ አመለካከት view of the Rittal 1280.000 Wall-mounted AX Enclosure, showcasing its overall design and light gray finish.
9. ዋስትና እና ድጋፍ
Rittal products are manufactured to high-quality standards. For warranty information, technical support, or to purchase replacement parts and accessories, please visit the official Rittal website or contact your local Rittal distributor.
አምራች፡ Rittal LLC
መጀመሪያ የሚገኝ፡- ጥቅምት 16 ቀን 2021 ዓ.ም
For further assistance, refer to the contact information provided on the Rittal Store on Amazon.
