የሻርኩን RGB SLIDER WT Mid-Tower PC Case የተጠቃሚ መመሪያ

1. መግቢያ

The Sharkoon RGB SLIDER WT is a versatile mid-tower PC case designed for optimal functionality and aesthetic appeal. It features an integrated RGB LED strip on the front panel, offering customizable lighting effects. The case supports various component configurations, including multiple cooling fan options and extensive storage capabilities. A tempered glass side panel provides a clear view የውስጥ አካላት.

ምስል 1.1: የፊት-ጎን view of the Sharkoon RGB SLIDER WT PC Case, showcasing the RGB LED strip and tempered glass side panel.

2. የጥቅል ይዘቶች

እባክዎ ሁሉም እቃዎች በጥቅሉ ውስጥ መኖራቸውን ያረጋግጡ፡-

• Sharkoon RGB SLIDER WT PC Case
• 1x 120mm Rear Fan (pre-installed)
• Accessory Box (containing screws, cable ties, and this manual)

3. ዝርዝሮች

Image 3.1: Diagram illustrating the dimensions of the Sharkoon RGB SLIDER WT PC Case.

4. ማዋቀር እና መጫን

4.1. ዝግጅት

Before beginning installation, ensure the PC case is placed on a stable, flat surface. Unpack all components and verify against the package contents list. It is recommended to wear an anti-static wrist strap to prevent damage to sensitive electronic components.

4.2. Motherboard መጫን

1. Install the I/O shield into the designated slot at the rear of the case.
2. Align the motherboard with the standoffs inside the case. Ensure the I/O ports align with the I/O shield.
3. የቀረቡትን ብሎኖች በመጠቀም ማዘርቦርዱን ያስጠብቁ።

ምስል 4.1: የውስጥ view of the PC case, showing the motherboard mounting area and pre-installed rear fan.

4.3. የኃይል አቅርቦት ክፍል (PSU) መጫን

1. Locate the PSU tunnel at the bottom rear of the case.
2. Slide the PSU into the tunnel from the rear of the case, ensuring the fan faces downwards (if applicable, for bottom intake).
3. PSUን ከኋላ በኩል ባሉት ብሎኖች ያስጠብቁት።

4.4. የማከማቻ መሣሪያ ጭነት

መያዣው 3.5" HDDs እና 2.5" SSDs ይደግፋል።

• 3.5 ኢንች ኤችዲዲዎች፡ Install into the drive cage located within the PSU tunnel.
• 2.5 ኢንች ኤስኤስዲዎች፡ Mount onto the dedicated SSD trays behind the motherboard tray or on top of the PSU tunnel.

ምስል 4.2፡ የኋላ የውስጥ ክፍል view, highlighting cable management options and locations for 2.5" SSDs and 3.5" HDD cage.

4.5. Expansion Card Installation (e.g., GPU)

1. አስፈላጊውን የ PCIe ማስገቢያ ሽፋኖች ከኋላ በኩል ያስወግዱ.
2. Insert the expansion card into the corresponding PCIe slot on the motherboard.
3. ካርዱን በዊንችዎች ያስጠብቁ።

4.6. Fan Installation (Optional)

Additional fans can be installed at the front and top of the case.

• የፊት ደጋፊዎች; Remove the front panel to access the mounting points for up to three 120mm fans.
• ከፍተኛ ደጋፊዎች፡ Mount up to two 120mm or 140mm fans to the top panel.

4.7. የኬብል አስተዳደር

Utilize the cutouts and tie-down points behind the motherboard tray to route and secure cables. This improves airflow and maintains a clean interior aesthetic.

5. የአሠራር መመሪያዎች

5.1. ማብራት

After all components are installed and cables connected, close the side panels. Connect the power cable to the PSU and a wall outlet. Press the power button on the top panel of the case to start your system.

ምስል 5.1: ከፍተኛ view of the case, detailing the front I/O panel with USB ports and audio jacks.

5.2. የRGB መብራት መቆጣጠሪያ

The front RGB LED strip can be controlled in two ways:

• አብሮገነብ መቆጣጠሪያ; Use the dedicated RGB control button on the top panel to cycle through 14 preset lighting modes.
• የእናትቦርድ ARGB ማመሳሰል፡ Connect the RGB cable from the case to a compatible 3-pin 5V ARGB header on your motherboard. The lighting can then be controlled via motherboard software (e.g., Asus Aura Sync, MSI Mystic Light Sync, Gigabyte Fusion, ASRock Polychrome SYNC).

5.3. Front Panel Ports

The front I/O panel provides convenient access to:

• ለከፍተኛ ፍጥነት የውሂብ ዝውውር 2x የዩኤስቢ 3.0 ወደቦች።
• 1x USB 2.0 port for general peripherals.
• Audio In (microphone) and Audio Out (headphone) jacks.

6. ጥገና

6.1. ማጽዳት

• ውጫዊ፡ ውጫዊ ገጽታዎችን ለስላሳ, መamp ጨርቅ. ገላጭ ማጽጃዎችን ያስወግዱ.
• የአቧራ ማጣሪያዎች; Regularly remove and clean the dust filters (e.g., top magnetic filter, bottom PSU filter) to maintain optimal airflow and prevent dust buildup inside the case.
• የውስጥ፡ Use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning the interior.

6.2. የአየር ፍሰት

Ensure that the case has adequate clearance around it for proper airflow. Avoid blocking intake or exhaust vents. Regularly check fan operation to ensure they are spinning correctly.

7. መላ መፈለግ

7.1. ስርዓቱ አይበራም

• Verify that the power cable is securely connected to both the PSU and the wall outlet.
• የ PSU የኃይል ማብሪያ / ማጥፊያው በ 'በርቷል' ቦታ ላይ መሆኑን ያረጋግጡ።
• Check that the front panel power button cable is correctly connected to the motherboard's front panel header.
• Confirm all internal power connections (24-pin ATX, CPU power, GPU power) are secure.

7.2. Fans Not Spinning

• ከማዘርቦርድ ወይም ከደጋፊ ተቆጣጣሪው ጋር የደጋፊ ሃይል ግንኙነቶችን ያረጋግጡ።
• Ensure fan headers are enabled in the motherboard BIOS/UEFI settings.

7.3. RGB መብራት አይሰራም

• If using the built-in controller, press the RGB button to cycle modes.
• If using motherboard sync, ensure the ARGB cable is correctly connected to a 3-pin 5V ARGB header (not 4-pin 12V RGB).
• Verify that the motherboard's RGB software is installed and configured correctly.

7.4. የፊት ፓነል የዩኤስቢ/የድምጽ ወደቦች አይሰሩም

• Check that the USB 3.0, USB 2.0, and HD Audio cables from the front panel are securely connected to the corresponding headers on the motherboard.
• Ensure motherboard drivers are installed.

8. ዋስትና እና ድጋፍ

Sharkoon products are manufactured to high-quality standards. For detailed warranty information, please refer to the warranty card included with your product or visit the official Sharkoon website. For technical support, product inquiries, or service requests, please contact Sharkoon customer support through their official channels.

For further assistance, please visit the official Sharkoon webጣቢያ፡ www.sharkoon.com