BLS T36-3

BLS T36-3 36 LED Closet Light Instruction Manual

Model: T36-3 (5500K Daylight White, 3 Pack)

መግቢያ

Thank you for choosing the BLS T36-3 36 LED Closet Light. This super bright, battery-powered under cabinet lighting solution is designed to enhance visibility and convenience in various indoor spaces. Featuring a motion sensor and a 1500mAh rechargeable battery, these wireless lights offer efficient and flexible illumination.

የማዋቀር መመሪያዎች

  1. መብራቶቹን መሙላት; Before first use, fully charge each LED light using the provided USB charging cable. The charging port is located on the side of the light. A red indicator light typically signifies charging, turning green or off when fully charged.
  2. የመጫኛ ወለል ያዘጋጁ; Ensure the desired installation surface is clean, dry, and smooth.
  3. Attach Magnetic Plates (for non-metal surfaces):
    • Peel off the protective film from one side of the 3M adhesive on the magnetic plate.
    • Firmly press the adhesive side of the magnetic plate onto the desired installation location.
    • Repeat for all lights.
  4. መብራቶቹን ይጫኑ;
    • If installing on a metal surface, simply attach the light directly as it has a built-in strong magnet.
    • If using magnetic plates, align the magnets on the back of the LED light with the installed magnetic plates and gently attach. The lights are easily detachable for recharging.
BLS LED Closet Light installation showing magnetic plates
Image: Illustration of the magnetic installation process for the BLS LED Closet Light, showing how to attach the light to a surface using adhesive magnetic plates.
Diagram showing magnetic installation on ironwork and non-ironwork surfaces
Image: Detailed diagram illustrating two installation methods: direct magnetic attachment to iron surfaces and using 3M adhesive magnetic plates for non-iron surfaces.

የአሠራር መመሪያዎች

The BLS T36-3 LED Closet Light features a slide switch with multiple operating modes:

The BLS Constant-Sense technology ensures the light stays illuminated as long as motion is detected nearby, automatically turning off approximately 15 seconds after motion ceases.

BLS LED Closet Light with slide switch showing OFF, AUTO NIGHT, AUTO DAY & NIGHT, and ON modes
Image: Close-up of the BLS LED Closet Light's slide switch, detailing the four operating modes: OFF, AUTO NIGHT (moon icon), AUTO DAY & NIGHT (sun icon), and ON.

ጥገና

Charging Demonstration Video

Video: A demonstration on how to charge the BLS LED Closet Light using the provided USB cable. This video shows the charging port and indicator light behavior.

Battery Life Information Video

Video: This video highlights the 1500mAh rechargeable battery and its extended run time of up to 120 days, demonstrating the product's efficiency.

መላ መፈለግ

ችግርሊሆን የሚችል ምክንያትመፍትሄ
መብራት አይበራም ፡፡ዝቅተኛ ባትሪ.
Incorrect mode setting.
Insufficient darkness (in AUTO NIGHT mode).
መብራቱን ሙሉ በሙሉ ይሙሉት።
Check the slide switch and ensure it's set to ON, AUTO NIGHT, or AUTO DAY & NIGHT.
Test in a darker environment or switch to AUTO DAY & NIGHT mode.
የእንቅስቃሴ ዳሳሽ አይሰራም።Incorrect mode setting.
ዳሳሽ ተዘግቷል።
Ambient light too bright (in AUTO NIGHT mode).
Ensure the switch is set to AUTO NIGHT or AUTO DAY & NIGHT.
ማናቸውንም መሰናክሎች ከዳሳሽ ያጽዱ።
Test in a darker area or switch to AUTO DAY & NIGHT.
ብርሃን ከተሰቀለው ወለል ላይ ይወርዳል።Adhesive not strong enough or surface not clean.
Magnetic plates not properly secured.
Clean the surface thoroughly before applying adhesive. Use new 3M adhesive strips if necessary. Consider using screws for more permanent installation if the surface allows.
አጭር የባትሪ ህይወት.Frequent activation.
Continuous ON mode usage.
በጊዜ ሂደት የባትሪ መበላሸት።
Optimize mode setting (e.g., use AUTO NIGHT in dark areas).
Avoid prolonged use in ON mode.
Ensure full charge cycles. If battery life remains significantly short, contact support.

ዝርዝሮች

ባህሪዝርዝር
የምርት ስምBLS
የሞዴል ስም36 LED Closet Lights (T36-3)
የቀለም ሙቀት5500ሺህ የቀን ብርሃን ነጭ
የ LEDs ብዛት36
ብሩህነት180 Lumens
የኃይል ምንጭ1500mAh Rechargeable Lithium Ion Battery (included)
ዋትtage3 ዋት
ቁሳቁስAcrylonitrile Butadiene Styrene, አሉሚኒየም
የምርት ልኬቶች8.9"ኤል x 1.4" ዋ x 0.6" ኤች
የእቃው ክብደት0.42 ኪሎግራም (14.8 አውንስ)
የመጫኛ ዓይነትWall Mount / Under Cabinet (Magnetic with 3M adhesive)
ልዩ ባህሪ3-way switching, Motion Sensor, Instant On
የመቆጣጠሪያ ዘዴየተንሸራታች መቀየሪያ
የቤት ውስጥ / የውጭ አጠቃቀምየቤት ውስጥ
የውሃ መቋቋም ደረጃWaterproof (Note: Typically means splash-proof, not submersible)

የዋስትና መረጃ

BLS offers an 18-month warranty for this product. To register for your free extended warranty, please scan the QR code provided on the product packaging or contact customer support.

የደንበኛ ድጋፍ

For any support needs, questions, or concerns regarding your BLS T36-3 LED Closet Light, please contact us via email:

cuscare.blscollection@gmail.com

ተዛማጅ ሰነዶች - T36-3

ቅድመview BLS HV25 Visor with Integrated Helmet - Technical Specification
Detailed technical specifications for the BLS HV25 visor, a high-protection helmet compatible with BLS 2700next and 2800next PAPRs, designed for industrial safety.
ቅድመview BLS 400/3 Celoobličejová maska: Technické údaje a vlastnosti
Podrobný přehled celoobličejové masky BLS 400/3, včetně jejích materiálů, technických specifikací, certifikací a vlastností pro bezpečnostní složky. Univerzální připojení RD-40 a vysoký ochranný faktor.
ቅድመview Tailcas በካቢኔ የወጥ ቤት መብራቶች ስር - 40 ሴ.ሜ የእንቅስቃሴ ዳሳሽ LED መመሪያ
ኦፊሴላዊ መመሪያ ለ Tailcas 40cm በካቢኔት የኩሽና መብራቶች ስር። ስለ እንቅስቃሴ ዳሳሽ ሁነታዎች፣ የብሩህነት እና የቀለም ሙቀት መቆጣጠሪያዎች፣ የመጫኛ ደረጃዎች እና የአጠቃቀም ምክሮች ለእነዚህ ዳግም ሊሞሉ የሚችሉ የ LED መብራቶች ይወቁ።
ቅድመview የ IRONCK የጦር መሣሪያ ቁም ሣጥን መጫኛ መመሪያ
ይህ ከ IRONCK የተወሰደ የመጫኛ እና የመገጣጠም መመሪያ ለ 47.2 ኢንች ሰፊ የጦር ልብስ ቁም ሣጥን ዝርዝር መመሪያዎችን ይሰጣል። ይህ ለባለ 3 በር የእንጨት መኝታ ቤት ቁም ሣጥን ካቢኔ የደህንነት ጥንቃቄዎችን፣ የእንክብካቤ መመሪያዎችን፣ የክፍል ዝርዝሮችን እና ደረጃ በደረጃ የመገጣጠም ንድፎችን ያካትታል።
ቅድመview የደን ​​ማስተር BLS-3H የጅምላ መዝገብ Sawhorse መመሪያ
አጠቃላይ መመሪያ ለደን ማስተር BLS-3H የጅምላ ሎግ ሳውሆርስ፣ የሚሸፍን ስብሰባ፣ አጠቃቀም፣ ደህንነት እና የዋስትና መረጃ። ብዙ ምዝግብ ማስታወሻዎችን እንዴት በአስተማማኝ እና በብቃት ማየት እንደሚችሉ ይወቁ።
ቅድመview XHDATA BL-5C ዳግም ሊሞላ የሚችል የባትሪ ተጠቃሚ መመሪያ
የተጠቃሚ መመሪያ ለXHDATA BL-5C የሚሞላ Li-ion ባትሪ፣ የአጠቃቀም መመሪያዎችን የሚሸፍን ፣የቻርጅ መሙላት ሂደቶች፣የደህንነት ጥንቃቄዎች እና ቴክኒካዊ ዝርዝሮች። በትክክለኛ አያያዝ፣ ማከማቻ እና አወጋገድ ላይ መረጃን ያካትታል።