ምርት አልቋልview
The Baseus LED Desk Lamp is a versatile, cordless lighting solution designed for various environments such as home offices, kitchens, bedrooms, and study areas. It features touch controls for brightness adjustment, magnetic mounting for easy installation, and a convenient 30-second turn-off delay.
Figure 1: Baseus LED Desk Lamp and its magnetic base.
ምን ይካተታል
ቦክስ ሲወጡ፣ እባክዎ ሁሉም የሚከተሉት ክፍሎች መኖራቸውን ያረጋግጡ።
- Magnetic desk lamp (x1)
- 1M USB Type-C cable (x1)
- Magnetic strip base (x1)
- የተጠቃሚ መመሪያ (x1)
ቪዲዮ 1፡ አልቋልview የተካተቱ አካላት.
ማዋቀር እና መጫን
The Baseus LED Desk Lamp offers flexible installation options due to its magnetic design.
- መግነጢሳዊ አባሪ፡ Lamp features a built-in magnet, allowing it to be directly adsorbed onto any ironwork surface.
- የማጣበቂያ መትከል; For non-iron surfaces, use the included 3M adhesive strip on the magnetic base. Ensure the surface is clean and flat before attaching the base. Once the base is secured, the lamp can be magnetically attached to it.
Figure 2: The magnetic base allows for easy attachment to various surfaces.
Video 2: Demonstration of magnetic installation.
የአሠራር መመሪያዎች
Lamp is controlled via sensitive touch buttons located on its surface.
- ማብራት/ማጥፋት፡ Press the power button (⑁) to turn the lamp በርቷል ወይም ጠፍቷል.
- የብሩህነት ማስተካከያ;
- Single click the brightness adjustment buttons (⌃ / ⌄) for three preset brightness levels.
- Long press the brightness adjustment buttons (⌃ / ⌄) for stepless dimming, allowing you to fine-tune the brightness from 10% to 100%. The lamp remembers your last brightness setting.
- 30-Second Turn-off Delay: Single click the timer button (⏱) to activate a 30-second delay before the light turns off. This feature provides a buffer, allowing your eyes to adjust to darkness and preventing you from fumbling in the dark.
- የማዕዘን ማስተካከያ; Lamp body can be rotated 80 degrees to direct light precisely where needed, reducing glare and reflection.
Figure 3: Touch control interface for power, brightness, and delay.
Video 3: Demonstration of brightness adjustment.
Figure 4: The 30-second turn-off delay feature.
Video 4: Demonstration of 30-second turn-off delay.
ባትሪ እና ባትሪ መሙላት
Lamp is equipped with a built-in 1800mAh USB rechargeable battery.
- በመሙላት ላይ፡ Use the provided USB Type-C cable to charge the lamp. A full charge typically takes 4-5 hours.
- የባትሪ ህይወት፡ The wireless rechargeable bar light can be used for 4-24 hours on a single charge, depending on the brightness level set.
Figure 5: Battery life estimates based on brightness levels.
Video 5: Charging the Baseus LED Desk Lamp.
የሚመከሩ መተግበሪያዎች
ይህ ሁለገብ ኤልamp is suitable for a wide range of uses:
- Under cabinet lighting in kitchens
- Closet lighting
- ዴስክ lamp for reading or study
- የአደጋ ጊዜ ብርሃን
- Fill light for mirrors or makeup areas
- Stairs and hallway lighting
ምስል 6: ዘፀampየ l ሌስamp's use in different settings.
Video 6: Various usage scenarios for the lamp.
የምርት ዝርዝሮች
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| የሞዴል ቁጥር | DGXC-C0G |
| ልኬቶች (D x W x H) | 1" ዲ x 10.87" ዋ x 8" ኤች |
| የእቃው ክብደት | 6.5 አውንስ (185 ግራም) |
| ቁሳቁስ | Wood, Plastic, Metal, Acrylonitrile Butadiene Styrene |
| የብርሃን ምንጭ ዓይነት | LED (42 LEDs) |
| ዋትtage | 5 ዋት |
| ጥራዝtage | 5 ቮልት |
| ብሩህነት | 100 Lumen |
| የኃይል ምንጭ | በባትሪ የሚሰራ (1800mAh ሊቲየም ፖሊመር) |
| የመቆጣጠሪያ ዘዴ | ንካ |
| ልዩ ባህሪያት | Rechargeable, MAX 24H LONG BATTERY LIFE, Easy Visual Interaction, No Blue Light Hazard, No Visible Strobing, Eye-Caring, 80° Angle Adjustment, Steplessly Adjustable Brightness, Magnetic & Handheld & 3M Adhesive Paste, Easy to Install, Portable, Light Color Memory Function, Cordless, 30 Seconds Turn-off Delay Touch Push |
| የቤት ውስጥ / የውጭ አጠቃቀም | የቤት ውስጥ |
| የማጠናቀቂያ ዓይነት | የተወለወለ |
| ቀለም | ግራጫ |
መላ መፈለግ
If you encounter any issues with your Baseus LED Desk Lamp, እባክዎን የሚከተሉትን የተለመዱ መፍትሄዎች ይመልከቱ፡
- መብራት የማይበራ; ኤልን ያረጋግጡamp is charged. Connect it to a power source using the USB-C cable and allow it to charge for a few minutes before attempting to turn it on again.
- Brightness not adjusting: Check if you are using the correct touch gestures. A single tap cycles through preset levels, while a long press enables stepless dimming.
- Magnetic base not holding: Ensure the surface where the magnetic base is attached is clean, dry, and smooth. If using the adhesive, ensure it has fully cured (typically 24 hours) before applying significant weight or force.
- አጭር የባትሪ ዕድሜ; Battery life varies significantly with brightness settings. Using the lamp at higher brightness levels will deplete the battery faster. Ensure the lamp is fully charged before extended use.
For persistent issues not covered here, please contact Baseus customer support.
ዋስትና እና ድጋፍ
Baseus is committed to customer satisfaction. We provide lifetime technical support and service for your product. For any inquiries or assistance, please contact our 24-hour friendly customer service team.
Please note: It is recommended to fully charge the lamp before its first use to optimize battery performance.
