መግቢያ
Thank you for choosing the Lepro 5m RGB LED Strip Light. This product is designed to provide versatile and vibrant lighting for various indoor applications. Featuring high-brightness SMD5050 LEDs, a wide range of colors, and easy installation, it enhances the ambiance of any space. Please read this manual carefully before installation and use to ensure proper operation and safety.
በሣጥኑ ውስጥ ያለው
መጫኑን ከመጀመርዎ በፊት ሁሉም አካላት መኖራቸውን ያረጋግጡ-
- LED Strip Light (5 meters) x 1
- DC12V Power Adapter x 1
- Connection Receiver x 1
- የርቀት መቆጣጠሪያ x 1
- የመመሪያ መመሪያ (ጃፓንኛ) x 1
የደህንነት መረጃ
- ይህ ምርት የተዘጋጀው ለ የቤት ውስጥ አጠቃቀም ብቻለውሃ ወይም ለከፍተኛ እርጥበት አያጋልጡ።
- ከመጫኑ ወይም ከመጠገኑ በፊት የኃይል አቅርቦቱ መቋረጡን ያረጋግጡ።
- Use only the provided DC12V power adapter. Using an incompatible power supply may damage the product or pose a fire hazard.
- የኤልዲ ስትሪፕን በደንብ አያጠፍጡት ወይም ከመጠን በላይ ኃይል አይጠቀሙ፣ ምክንያቱም ይህ ወረዳውን ሊጎዳ ይችላል።
- ልጆች በማይደርሱበት ቦታ ያስቀምጡ.
- If any part of the product is damaged, discontinue use immediately and contact support.
ማዋቀር
Follow these steps for proper installation of your LED strip light:
- ወለሉን ያዘጋጁ; Clean the desired installation surface thoroughly. Ensure it is dry, smooth, and free of dust or oil for optimal adhesive performance.
- መለካት እና መቁረጥ (አማራጭ): If a shorter length is required, cut the LED strip along the designated cut marks (indicated by a scissor icon) using scissors. ማስታወሻ፡- Only cut at these specific marks. Cutting elsewhere will damage the strip. Cut sections cannot be reconnected without additional connectors (sold separately).
- ክርቱን ይተግብሩ፦ Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
- አካላትን ያገናኙ፡ Connect the LED strip to the connection receiver, ensuring the arrows on both components align. Then, connect the DC12V power adapter to the receiver.
- አብራ፡ Plug the power adapter into a suitable power outlet. Remove the insulation sheet from the remote control before first use. Point the remote control towards the receiver and press the power button to turn on the lights.
የአሠራር መመሪያዎች
The LED strip light is controlled using the included 44-key remote control. Ensure the remote is pointed towards the receiver for effective operation.
የርቀት መቆጣጠሪያ ተግባራት;
- ማብራት/ማጥፋት፡ የሚለውን ይጫኑ ቀይ የኃይል አዝራር መብራቶቹን ለማብራት ወይም ለማጥፋት።
- የብሩህነት ማስተካከያ; የሚለውን ተጠቀም የላይ እና የታች ቀስት አዝራሮች (labeled 'Brightness Adjust') to increase or decrease the light intensity.
- የቀለም ምርጫ፡- ከ ይምረጡ 20 ቅድመ-ቅምጦች by pressing the corresponding color buttons.
- DIY ሁነታዎች፡ የ DIY1-DIY6 አዝራሮች allow you to create and save custom colors by adjusting the Red, Green, and Blue intensity using the RGB arrow buttons.
- ተለዋዋጭ ሁነታዎች
- ፈጣን/ዘገየ፡ Adjust the speed of dynamic modes.
- ራስ-ሰር Cycles through all dynamic modes automatically.
- ብልጭታ: በቀለማት ያበራል።
- JUMP3/JUMP7፡ Jumps between 3 or 7 colors.
- FADE3/FADE7፡ በ3 ወይም 7 ቀለማት መካከል ይደበዝዛል።
ጥገና
- ማጽዳት፡ Ensure the power is off and unplugged before cleaning. Gently wipe the LED strip with a dry, soft cloth. Do not use harsh chemicals or abrasive cleaners.
- ማከማቻ፡ If storing the strip for an extended period, ensure it is clean and dry. Roll it loosely to prevent damage to the LEDs or circuit. Store in a cool, dry place away from direct sunlight.
- የማጣበቂያ እንክብካቤ; The 3M adhesive is strong, but repeated removal and reapplication may reduce its effectiveness.
መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| የ LED ስትሪፕ አይበራም. | 1. Power adapter not plugged in. 2. Remote control insulation sheet not removed. 3. Connections are loose or incorrect. 4. Remote control battery is dead. | 1. Ensure power adapter is securely plugged into an outlet. 2. Remove the clear plastic insulation sheet from the remote control battery compartment. 3. Check all connections, ensuring arrows align between the strip and receiver. 4. Replace the remote control battery (CR2025 or equivalent). |
| የርቀት መቆጣጠሪያ ምላሽ እየሰጠ አይደለም። | 1. የርቀት መቆጣጠሪያው ወደ ተቀባዩ አልተገለጸም። 2. Obstruction between remote and receiver. 3. Remote control battery is dead. | 1. Point the remote directly at the receiver. 2. Remove any objects blocking the line of sight. 3. የርቀት መቆጣጠሪያ ባትሪውን ይተኩ. |
| Some sections of the strip are not lighting up. | 1. Damage to the LED strip. 2. Incorrect cutting. | 1. Inspect the strip for physical damage. If damaged, contact support. 2. Ensure cuts were made only at designated marks. |
ዝርዝሮች
- የሞዴል ቁጥር፡- PR410082-RGB-JP
- የምርት ስም፡ ሌፕሮ
- የብርሃን ምንጭ ዓይነት፡- LED (SMD5050)
- የ LED መጠን: 150 LEDs (30 LEDs per meter)
- የጭረት ርዝመት፡ 5 ሜትር
- የኃይል ፍጆታ; 18 ዋ
- ግብዓት Voltage: DC12V 1.5A
- የቀለም አማራጮች: RGB (20 preset colors + DIY modes)
- የመቆጣጠሪያ ዘዴ፡- 44-key IR Remote Control
- የቤት ውስጥ / የውጪ አጠቃቀም; የቤት ውስጥ
- ልዩ ባህሪያት፡ Dimmable, Cuttable, 3M Adhesive, PSE Certified
- የጥቅል መጠን፡ 13.1 x 10.7 x 6.7 ሴ.ሜ; 230 ግ
ዋስትና እና ድጋፍ
This Lepro LED Strip Light comes with a የ 2 ዓመት ዋስትና. If you encounter any issues or have questions regarding the product, please contact Lepro JP customer support through the retailer's platform. Provide your order details and a description of the issue for prompt assistance.
For further assistance, you can visit the official Lepro store on Amazon: የሌፕሮ አማዞን መደብር
