መግቢያ
Thank you for choosing the HOBBYWING Xerun XD10 Pro Electronic Speed Controller (ESC). This high-performance sensored brushless ESC is designed to enhance your experience with Hobbywing brushless power systems. Please read this manual thoroughly before use to ensure proper setup and safe operation.
ጠቃሚ የደህንነት ማስጠንቀቂያዎች፡-
- To prevent short circuits, ensure all wires and connections are well insulated before connecting the ESC to related devices.
- Ensure all devices are securely connected to avoid poor connections and potential damage to electronic components.
- ሁልጊዜ እንደገናview the manuals for all power devices and chassis to confirm a rational power configuration before operating this unit.
ማዋቀር
ሽቦ እና ግንኙነቶች
Use a soldering iron with a minimum power of 60W to solder all input/output wires and connectors. Proper soldering ensures reliable electrical connections.
BEC Output Configuration
The ESC features a built-in switch mode BEC with a maximum output of 10A. The voltage is adjustable from 5V to 7.4V in 0.1V steps, accommodating various servos and other devices requiring different voltagኢ.
PRG/FAN Port Usage
A dedicated PRG/FAN port allows for connecting an external cooling fan to maximize performance or for connecting an LCD program box or WiFi module for advanced programming.
Image of the HOBBYWING Xerun XD10 Pro Electronic Speed Controller.
የአሠራር መመሪያዎች
Driving and Braking Force Regulation
The ESC allows for variable frequency regulation of PWM and brake frequencies. This feature enables users to precisely control the driving and braking forces of the motors, optimizing performance for different conditions.
የአሠራር ደህንነት
- Avoid Free Revving: Do not hold the vehicle in the air and rev it to full throttle. Rubber tires can expand to extreme sizes or even crack, potentially causing serious injury.
- የሙቀት ቁጥጥር; Discontinue use immediately if the ESC casing temperature exceeds 90°C (194°F). Prolonged operation above this temperature can damage both the ESC and the motor.
- Thermal Protection Setting: Hobbywing recommends setting the 'ESC Thermal Protection' to 105°C (221°F). This refers to the internal temperature of the ESC.
የጽኑ ዝመናዎች
Firmware upgrades can be performed using a Hobbywing multifunction LCD program box or an OTA Programmer (sold separately).
ጥገና
የባትሪ ግንኙነት ማቋረጥ
Always disconnect the batteries after each use. If the ESC remains connected to the batteries, it continuously consumes current, even when turned off. This can lead to complete discharge of the battery and potential damage to both the battery and the ESC if left connected for extended periods.
መላ ፍለጋ እና ጥበቃ
አብሮገነብ ጥበቃዎች
The Xerun XD10 Pro ESC incorporates multiple protection features to safeguard your system:
- ዝቅተኛ-ጥራዝtagሠ የመቁረጥ ጥበቃ
- ESC and motor thermal protection
- Fail-safe (throttle signal loss protection)
- Reverse polarity protection (Note: The external standard capacitor pack may still be damaged if battery reversal occurs.)
የውሂብ ምዝግብ ማስታወሻ
The ESC supports data logging, which records the maximum ESC/motor temperature, motor speed/RPM, and other relevant data in real-time. This information can be valuable for diagnosing performance issues and optimizing settings.
ዝርዝሮች
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| ቀጣይ/ከፍተኛ ወቅታዊ | 100A/800A |
| LiPo / NiMH ሕዋሶች | 2S LiPo / 4-6S NiMH |
| BEC ውፅዓት | 5-7.4V Adjustable, 5A Continuous (Switch-mode) |
| የአሠራር ሙቀት | እስከ 105°ሴ (221°F) |
| የምርት ልኬቶች | 4 x 2 x 4 ኢንች |
| የእቃው ክብደት | 7.2 አውንስ (0.45 ፓውንድ) |
| ቁሳቁስ | ፕላስቲክ |
| አምራች | Hobbywing Technology |
| UPC/GTIN | 088718508605 |
የዋስትና መረጃ
Please note that damage resulting from continuous battery connection after use, leading to complete discharge, will not be covered under warranty. Always disconnect batteries when the ESC is not in use.
ድጋፍ
For further assistance, technical support, or inquiries regarding your HOBBYWING Xerun XD10 Pro ESC, please contact your retailer or the official HOBBYWING support channels.
