SINOTIMER TM618 -7 Days Programmable Weekly Timer Module

1. በላይview

The SINOTIMER TM618 timer module is designed to automatically control the power supply to various electrical apparatus, such as streetlights, neon signs, billboards, and other appliances, based on a preset time schedule. This digital timer switch features a rechargeable internal battery to maintain program settings during power outagኢ.

ምስል 1.1: የፊት view of the TM618 Timer Module.

2. ቁልፍ ባህሪያት

• የታመቀ እና ቦታ ቆጣቢ ንድፍ።
• Engineered with advanced digital timing technology.
• High functionality for precise time control.
• Built-in rechargeable battery for program retention.
• Multiple ON/OFF programs for weekly scheduling.

3. ማዋቀር እና መጫን

3.1. የሽቦ ንድፍ

Proper wiring is crucial for the safe and correct operation of the TM618 timer module. Refer to the diagram below for connection details. Ensure power is disconnected before performing any wiring.

Figure 3.1: Wiring Terminals and Specifications.

• Input (200-250VAC): Connect your main power supply to terminals 1 and 2.
• Output (16 AMP / 250VAC, 20 AMP @30 VDC): Terminals 3, 4, and 5 are for the controlled output. Terminal 3 is common, Terminal 4 is normally open (NO), and Terminal 5 is normally closed (NC). Connect your load to the appropriate terminals based on your application (e.g., between 3 and 4 for normally off, turning on when timed).

3.2. Initial Power-Up and Battery

Upon initial power-up, the timer's internal rechargeable battery (40mAh) will begin charging. This battery saves your programmed settings during power interruptions. Allow the unit to be powered for at least 30 minutes for the battery to gain sufficient charge before programming or disconnecting power.

Figure 3.2: Internal 40mAh Rechargeable Battery.

Figure 3.3: TM618 Operating Voltage (220V AC shown).

4. የአሠራር መመሪያዎች

The TM618 timer allows for precise control with up to 16 ON/OFF programs per day or week. The buttons on the front panel are used for setting the time and programs.

Figure 4.1: Timer Module with Manual.

4.1. የአሁኑን ጊዜ ማቀናበር

1. የሚለውን ይጫኑ ሰዓት button and hold it.
2. በመያዝ ላይ እያለ ሰዓት, ይጫኑ ሳምንት የአሁኑን የሳምንቱን ቀን ለማዘጋጀት.
3. በመያዝ ላይ እያለ ሰዓት, ይጫኑ ሰአት የአሁኑን ሰዓት ለማዘጋጀት.
4. በመያዝ ላይ እያለ ሰዓት, ይጫኑ MIN የአሁኑን ደቂቃ ለማዘጋጀት.
5. ይልቀቁት ሰዓት አዝራር። ሰዓቱ አሁን ተዘጋጅቷል።

4.2. ፕሮግራሚንግ የበራ/የጠፋ ጊዜ

The timer supports up to 16 ON/OFF programs. Each program consists of an ON time and an OFF time.

1. የሚለውን ይጫኑ ፕሮግ button once. The display will show "1 ON".
2. ተጫን ሳምንት to select the day(s) for this program (e.g., MO, TU, WE, TH, FR, SA, SU, or combinations like MO-FR, SA-SU, MO-SA, etc.).
3. ተጫን ሰአት የሚፈለገውን ሰዓት ላይ ለማዘጋጀት።
4. ተጫን MIN የተፈለገውን ON ደቂቃ ለማዘጋጀት.
5. ተጫን ፕሮግ እንደገና። ማሳያው "1 ጠፍቷል" ያሳያል.
6. ለዚህ ፕሮግራም የሚፈለገውን የጠፋ ቀን(ዎች)፣ ሰዓት እና ደቂቃ ለማዘጋጀት ደረጃ 2-4ን ይድገሙ።
7. ተጫን ፕሮግ to advance to the next program ("2 ON") or to exit programming mode if no more programs are needed.
8. To clear a program, press አስታውስ እያለ viewing the specific ON or OFF program you wish to clear.

4.3. በእጅ መሻር

የሚለውን ይጫኑ ማንዋል button to cycle through different operating modes:

• በራስ ሰር አብራ፡- The timer is currently ON and will follow the programmed schedule.
• ራስ -ሰር ጠፍቷል The timer is currently OFF and will follow the programmed schedule.
• በርቷል The timer is forced ON, overriding any programs.
• ጠፍቷል The timer is forced OFF, overriding any programs.

4.4. Recall Function

የ አስታውስ button (often marked 'R' or 'RESET') is used to clear specific program settings or to reset the timer. A small pinhole button (R) is typically used for a full reset, which clears all programs and resets the time.

5. ጥገና

5.1. የባትሪ እንክብካቤ

The TM618 features a built-in rechargeable battery. To ensure its longevity and proper function, keep the timer connected to power for regular charging. If the timer is stored for extended periods without power, the battery may discharge, requiring a full charge upon reconnection.

5.2. ማጽዳት

Clean the exterior of the timer module with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these can damage the plastic casing ወይም ማሳያ። ምንም ፈሳሽ ወደ መሳሪያው ውስጥ እንደማይገባ ያረጋግጡ።

6. መላ መፈለግ

• ማሳያው ባዶ ነው ፦ Check power connections. Ensure the unit has been powered for at least 30 minutes to charge the internal battery.
• Programs not executing: Verify that the current time is set correctly. Check that the timer is in "AUTO ON" or "AUTO OFF" mode, not forced ON/OFF. Review your programmed ON/OFF times for accuracy.
• Timer not responding to buttons: Perform a full reset using the small 'R' pinhole button. If issues persist, ensure proper power supply.

7. ዝርዝሮች

7.1. ልኬቶች

Figure 7.1: Front Dimensions.

Figure 7.2: Side Dimensions.

8. ዋስትና እና ድጋፍ

For information regarding product warranty, technical support, or service, please refer to the documentation provided with your purchase or contact your retailer. Keep your proof of purchase for any warranty claims.