1. ምርት አብቅቷልview
This manual provides instructions for the Okin JLDQ-10 and JLDQ.10.435.250H Power Recliner Actuator. This actuator is designed as a replacement part for various power recliners, lift chairs, sofas, and beds. It is compatible with several Okin JLDQ series models, including JLDQ.19B.435.250D02/03/04, JLDQ.10.435.250, JLDQ.3.435.250, and 1.28.000.110.30 series. While there may be minor differences, these do not affect its functionality as a replacement.
This image displays the product label on the Okin recliner actuator motor, showing model numbers JLDQ-10 and JLDQ.10.435.250H, voltage (24V), power (50W), duty cycle (1 min ON/8 min OFF), and connection type (Class 2 DC circuit).
2. ቁልፍ ባህሪያት
- ቅንብር፡ Consists of one motor and two connectors.
- አያያዦች፡ Features a 5-pin round plug for the switch hand control and a 2-pin square plug with a clip for the power supply.
- መልክ፡ Constructed with black PA (polyamide) and silver-white aluminum components.
- ስትሮክ፡ Provides a stroke length of 250 mm (approximately 9.84 inches).
- መጠኖች፡- Minimum installation dimension (shrink) is 435 mm (17.12 inches); Maximum dimension (extended) is 685 mm.
- የመጫን አቅም፡ Offers a push force of 1000N and a pull force of 1000N.
- ተግባር፡- Designed for quiet operation and easy installation.
This graphic highlights key features of the Okin recliner actuator motor, including its composition (1 motor, 2 connectors), appearance (black PA, silver white aluminum), stroke (250mm), minimum install dimension (435mm), and maximum install dimension (685mm).
3. የመጫኛ መመሪያ
Before beginning installation, ensure that the new actuator is compatible with your recliner's frame. Different actuators may have varying minimum installation dimensions, stroke lengths, and plug types. Verify that the model number of this Okin actuator matches or is a compatible replacement for your existing motor.
የመጫኛ ደረጃዎች
- ኃይልን አቋርጥ፡ Always unplug your recliner from the main power supply before attempting any installation or maintenance.
- የድሮውን አክቲቬተር ያስወግዱ፦ Carefully detach the old actuator from the recliner frame. Note how it was mounted and connected for reference.
- አዲስ አክቲቬተር ይጫኑ፦ Secure the Okin JLDQ-10 / JLDQ.10.435.250H actuator to the recliner frame using the appropriate mounting points. Ensure it is firmly attached and aligned correctly.
- የመገናኛ መሰኪያዎች፡
- ባለ 5-ፒን ክብ መሰኪያውን ከማብሪያ / ማጥፊያ እጅ መቆጣጠሪያ ጋር ያገናኙ።
- Connect the 2-pin square plug with the clip to the power supply.
- ግንኙነቶችን ያረጋግጡ፡ ሁሉም ግንኙነቶች ደህንነታቸው የተጠበቀ እና በትክክል የተቀመጡ መሆናቸውን ለማረጋገጥ ደግመው ያረጋግጡ።
- የሙከራ ተግባር Plug the recliner back into the power supply and test the actuator's movement using the hand control. Ensure smooth operation through its full range of motion.
This image illustrates the two types of connectors on the Okin recliner actuator motor: a 5-pin round plug for the switch hand control and a 2-pin square plug with a clip for the power supply.
4. ኦፕሬሽን
Once installed and connected to a power source, the Okin JLDQ-10 / JLDQ.10.435.250H actuator operates in conjunction with your recliner's hand control. Use the buttons on your hand control to extend or retract the recliner mechanism. The motor is designed for a duty cycle of 1 minute ON and 8 minutes OFF, meaning it should not be operated continuously for more than one minute at a time to prevent overheating and ensure longevity.
5. ጥገና
The Okin recliner actuator is designed for durability and requires minimal maintenance. To ensure optimal performance and extend its lifespan:
- መደበኛ ምርመራ; Periodically check the motor and its connections for any signs of wear, loose wires, or damage.
- ማጽዳት፡ Keep the motor free from dust and debris. Use a dry cloth to wipe down the exterior. Avoid using liquid cleaners directly on the motor.
- ቅባት፡ The internal components are pre-lubricated. Do not attempt to lubricate the motor unless specifically instructed by a qualified technician.
- ከመጠን በላይ መጫንን ያስወግዱ; Do not exceed the specified load capacity of 1000N (push and pull force).
6. መላ መፈለግ
If your recliner is not operating correctly after installing the Okin actuator, follow these troubleshooting steps:
- የኃይል አቅርቦትን ይፈትሹ; Ensure the recliner is properly plugged into a working electrical outlet. Verify that the power supply unit is functioning correctly.
- Inspect Hand Control: Test the hand control switch. Sometimes, the issue may lie with the control unit rather than the motor itself.
- Verify Motor Connections: Confirm that both the 5-pin round plug (for the hand control) and the 2-pin square plug (for power) are securely connected to the actuator.
- ተኳኋኝነትን ያረጋግጡ፡ Re-check the model number of your original motor against the Okin JLDQ-10 / JLDQ.10.435.250H to ensure it is a compatible replacement. Pay close attention to the minimum install dimension, stroke, and plug types.
- አካላዊ እንቅፋቶች፡ Inspect the recliner mechanism for any obstructions that might be preventing the actuator from moving freely.
- Motor Noise/Movement: Listen for any unusual noises from the motor. If the motor makes noise but does not move, there might be a mechanical issue or an obstruction. If there is no noise, check electrical connections more thoroughly.
እነዚህ እርምጃዎች ችግሩን ካልፈቱት፣ ለተጨማሪ እርዳታ የደንበኛ ድጋፍን ያነጋግሩ።
7. ዝርዝሮች
| ዝርዝር መግለጫ | ዝርዝር |
|---|---|
| የሞዴል ቁጥሮች | JLDQ-10, JLDQ.10.435.250H |
| ጥራዝtage | 24 ቪ |
| ኃይል | 50 ዋ |
| የግዴታ ዑደት | 1 ደቂቃ በርቷል / 8 ደቂቃ ጠፍቷል |
| ሎድ (የግፊት ኃይል) | 1000N |
| ሎድ (የጎትት ኃይል) | 1000N |
| የስትሮክ ርዝመት | 250 ሚሜ (9.84 ኢንች) |
| ዝቅተኛው የመጫኛ ልኬት (መቀነስ) | 435 ሚሜ (17.12 ኢንች) |
| ከፍተኛው ልኬት (የተራዘመ) | 685 ሚ.ሜ |
| የምርት ልኬቶች | 17.7 x 4 x 3 ኢንች |
| የእቃው ክብደት | 5.24 ፓውንድ |
| አምራች | ኦኪን ሪፍረንድ ኤሌክትሪክ ቴክኖሎጂ ኩባንያ፣ ሊሚትድ |
This image shows the minimum installation size (17.12 inches) and the stroke length (9.84 inches or 250mm) of the Okin recliner actuator motor, illustrating its retracted and extended states.
8. ዋስትና እና ድጋፍ
For warranty information or technical support, please refer to the documentation provided with your purchase or contact the manufacturer directly. Ensure you have your product model number and purchase details available when seeking support.
