1. መግቢያ
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec NX700 Mid-Tower ATX Gaming Case. Please read this manual thoroughly before beginning assembly to ensure proper setup and safe usage.
Figure 1: Antec NX700 Mid-Tower ATX Gaming Case overview.
ቁልፍ ባህሪያት
- 3D Geometric Mesh Front Panel: Designed for optimal airflow and aesthetic appeal.
- Included ARGB Fans: Comes with two 185mm ARGB fans in the front and one 120mm ARGB fan in the rear for effective cooling and customizable lighting.
- ግልፍተኛ ብርጭቆ የጎን ፓነል A 4mm thick tempered glass side panel provides a clear view የውስጥ አካላትዎ።
- ሰፊ የራዲያተር ድጋፍ; Supports up to a 360mm radiator for advanced liquid cooling solutions.
- Versatile I/O Panel: Features Power, LED control button, Reset, 2 x USB 3.0 ports, and MIC/HD-AUDIO jacks.
- የማዘርቦርድ ተኳኋኝነት፡ ATX፣ Micro-ATX እና Mini-ITX motherboardsን ይደግፋል።
Figure 2: Close-up of the 3D geometric mesh front panel, designed for enhanced airflow.
2. ማዋቀር እና መጫን
Follow these steps to install your components into the Antec NX700 case.
2.1 Included Fans Installation
The case comes pre-installed with two 185mm ARGB fans at the front and one 120mm ARGB fan at the rear. Ensure these fans are properly connected to your motherboard or a fan controller for power and ARGB functionality.
Figure 3: Illustration of the included 2 x 185mm ARGB front fans and 1 x 120mm ARGB rear fan.
2.2 Cooling System Configuration
The NX700 supports various fan and radiator configurations to optimize cooling performance.
- ፊት፡ Supports 3 x 120mm, 3 x 140mm, or 2 x 185mm fans. Radiator support up to 360mm.
- ከፍተኛ፡ Supports 2 x 120mm or 2 x 140mm fans. Radiator support up to 280mm.
- የኋላ፡ Supports 1 x 120mm or 1 x 140mm fan. Radiator support up to 140mm.
- የኃይል አቅርቦት ሽፋን; 2 x 120 ሚሜ አድናቂዎችን ይደግፋል።
Figure 4: Diagram illustrating fan and radiator mounting options within the case.
Figure 5: Illustration showing space for a 360mm radiator installation at the front, even with 185mm fans.
2.3 አካል መጫን
The NX700 offers ample space for various components. Ensure all cables are routed neatly for optimal airflow and aesthetics.
- ማዘርቦርድ፡ Supports ATX motherboards (up to 305mm x 275mm).
- ሲፒዩ ማቀዝቀዣ፡- ከፍተኛው ቁመት 170 ሚሜ።
- ግራፊክስ ካርድ (ጂፒዩ)፡- ከፍተኛው ርዝመት 340 ሚሜ።
- የኃይል አቅርቦት (PSU)፡- Supports PSUs up to 200mm (with HDD) or 365mm (without HDD).
- ማከማቻ፡ 2 x 3.5" HDD / 2.5" SSD (convertible) and 4 x 2.5" SSDs.
Figure 6: Internal layout showing maximum dimensions for CPU cooler, GPU, and motherboard support.
ምስል 7: ውስጣዊ view of the NX700 case with various components installed, demonstrating space and layout.
2.4 Video Guide for Assembly
Watch this official video for a visual guide on the Antec NX700 Mid-Tower ATX Gaming Case features and assembly process.
ቪዲዮ 1፡ ይፋዊ ተጠናቋልview and assembly guide for the Antec NX700 Mid-Tower ATX Gaming Case.
3. የአሠራር መመሪያዎች
3.1 የግቤት/ውፅዓት ፓነል ተግባራት
The top I/O panel provides convenient access to essential controls and ports.
- የኃይል ቁልፍ፡- ስርዓቱን ያበራል ወይም ያጠፋል.
- የኤልኢዲ መቆጣጠሪያ ቁልፍ፡ Cycles through various ARGB lighting modes for the included fans.
- ዳግም አስጀምር አዝራር፡- ስርዓቱን እንደገና ያስጀምራል።
- ዩኤስቢ 3.0 ወደቦች (x2) ለከፍተኛ ፍጥነት የውሂብ ዝውውር።
- MIC/HD-AUDIO Jacks: የጆሮ ማዳመጫዎችን እና ማይክሮፎኖችን ለማገናኘት።
ምስል 8: ዝርዝር view of the top I/O panel with power, LED control, USB 3.0, and audio ports.
3.2 ARGB የደጋፊ ቁጥጥር
The included ARGB fans can be controlled either via the dedicated LED button on the I/O panel or synchronized with your motherboard's ARGB software.
- Using the LED Control Button: Press the LED button on the I/O panel to cycle through pre-programmed lighting effects.
- የእናትቦርድ ማመሳሰል፡ To sync with your motherboard, connect the ARGB cables from the fans to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion) to control the lighting.
Figure 9: The Antec NX700 case showcasinደማቅ የARGB የመብራት ችሎታዎቹ።
4. ጥገና
Regular maintenance helps ensure the longevity and optimal performance of your Antec NX700 case.
- የአቧራ ማጣሪያዎች; Periodically clean the dust filters located at the top and bottom of the case. Gently remove them and use compressed air or a soft brush to clear accumulated dust.
- የጉዳይ ውጫዊ ክፍል፡ ውጫዊ ገጽታዎችን ለስላሳ, መamp ጨርቅ. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን ያስወግዱ።
- የተስተካከለ የመስታወት ፓነል፡ Clean the tempered glass panel with a microfiber cloth and a glass cleaner designed for electronics. Avoid excessive force or harsh chemicals.
- የውስጥ ጽዳት; Every few months, open the case and use compressed air to remove dust from internal components and fan blades. Ensure the system is powered off and unplugged before cleaning.
5. መላ መፈለግ
This section addresses common issues you might encounter with your Antec NX700 case.
5.1 Fans Not Spinning or Lighting Up
- የኃይል ግንኙነት; Verify that all fan power cables are securely connected to the motherboard fan headers or a fan controller.
- የARGB ግንኙነት፡ Ensure ARGB cables are correctly connected to a 3-pin 5V ARGB header on the motherboard or the case's LED controller. Incorrect connection (e.g., to a 4-pin 12V RGB header) can damage the LEDs.
- LED Button Functionality: If using the case's LED button, ensure it is functioning. Try cycling through modes.
- Motherboard ሶፍትዌር፡- If using motherboard sync, check your motherboard's ARGB software for fan control and lighting settings.
- Molex Connector: Some fan controllers or hubs may require a Molex connector for power. Ensure this is properly connected to your power supply.
5.2 No Power to System
- PSU Connection: Ensure the power supply is properly installed and connected to the motherboard and all components. Check that the PSU switch is in the 'ON' position.
- የፊት ፓነል አያያዦች፡- የፊት ፓነል የኃይል ማብሪያ / ማጥፊያ ገመድ ከእናትቦርዱ የፊት ፓነል ራስጌ ጋር በትክክል መገናኘቱን ያረጋግጡ። ትክክለኛውን ፒንአውት ለማግኘት የእናትዎን ማኑዋል ይመልከቱ።
5.3 Missing Motherboard Mounting Stand-offs
While the case includes standard stand-offs, some motherboard layouts (e.g., certain ATX boards) may require additional stand-offs for full support. Ensure all necessary stand-offs are installed to prevent motherboard flex and potential damage.
6. ዝርዝሮች
Detailed technical specifications for the Antec NX700 Mid-Tower ATX Gaming Case.
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| የምርት ስም | አንቴክ |
| ተከታታይ | NXXXTX |
| የሞዴል ስም | NXXXTX |
| የንጥል ሞዴል ቁጥር | 0-761345-81072-2 |
| የጉዳይ ዓይነት | ማዕከላዊ ማማ |
| የማዘርቦርድ ተኳኋኝነት | ATX፣ ማይክሮ-ATX፣ ሚኒ-ITX |
| ቁሳቁስ | SPCC + Plastic, Tempered Glass |
| የምርት ልኬቶች (LxWxH) | 17.32 x 8.66 x 19.37 ኢንች (440 x 220 x 492 ሚሜ) |
| የእቃው ክብደት | 15.84 ፓውንድ (7.2 ኪሎግራም) |
| የተካተቱ አድናቂዎች | 2 x 185ሚሜ ARGB (ፊት ለፊት)፣ 1 x 120ሚሜ ARGB (ኋላ) |
| የፊት አድናቂ ድጋፍ | 3 x 120 ሚሜ / 3 x 140 ሚሜ / 2 x 185 ሚሜ |
| ከፍተኛ የደጋፊዎች ድጋፍ | 2 x 120 ሚሜ / 2 x 140 ሚሜ |
| የኋላ ማራገቢያ ድጋፍ | 1 x 120 ሚሜ / 1 x 140 ሚሜ |
| PSU Shroud Fan Support | 2 x 120 ሚሜ |
| የፊት የራዲያተር ድጋፍ | እስከ 360 ሚ.ሜ |
| ከፍተኛ የራዲያተር ድጋፍ | እስከ 280 ሚ.ሜ |
| የኋላ ራዲያተር ድጋፍ | እስከ 140 ሚ.ሜ |
| ከፍተኛው የሲፒዩ ማቀዝቀዣ ቁመት | 170 ሚሜ |
| ከፍተኛው የጂፒዩ ርዝመት | 340 ሚሜ |
| ከፍተኛው የ PSU ርዝመት | 200mm (with HDD) / 365mm (without HDD) |
| Drive Bays | 2 x 3.5" HDD / 2.5" SSD (convertible), 4 x 2.5" SSD |
| I/O ፓነል | Power, LED Control, Reset, 2 x USB 3.0, MIC/HD-AUDIO |
Figure 10: Dimensions of the Antec NX700 Mid-Tower ATX Gaming Case.
ምስል 11: የኋላ view of the Antec NX700, showing expansion slots and fan mount.
7. ዋስትና እና ድጋፍ
For warranty information, technical support, or to inquire about replacement parts, please visit the official Antec website or contact Antec customer service. Keep your proof of purchase for warranty claims.
አንቴክ ኦፊሴላዊ Webጣቢያ፡ www.antec.com
