Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) Instruction Manual

1. መግቢያ እና በላይview

This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, Model ASHC2002W. Please read all instructions carefully before use and retain this manual for future reference.

The Stelpro ASHC2002W is an economical wall-mounted convector heater designed to provide dependable, quiet convection heating for spaces up to 200 square feet. It features a slim design, a built-in electronic thermostat, and a durable finish, making it suitable for various indoor environments.

Image 1.1: Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)

2. የደህንነት መረጃ

WARNING: This heater is hardwired only and is NOT a plug-in unit. Installation must be performed by a qualified electrician in accordance with all local and national electrical codes.

• ይህንን ማሞቂያ ከመጫንዎ ወይም ከመጠቀምዎ በፊት ሁሉንም መመሪያዎች ያንብቡ.
• Ensure the power supply is disconnected at the main circuit breaker before installation or maintenance.
• Do not install the heater closer than 3 feet (0.9 m) from the front of the heater and away from the side and rear of any combustible materials (e.g., curtains, draperies, furniture).
• Do not install the heater in areas where gasoline, paint, or other flammable liquids are stored.
• ይህ ማሞቂያ ለቤት ውስጥ አገልግሎት ብቻ የተነደፈ ነው.
• Keep the top air discharge grille clear of obstructions to ensure proper airflow.

3. የጥቅል ይዘቶች

ጥቅሉን ሲከፍቱ ሁሉም አካላት መኖራቸውን እና ያልተበላሹ መሆናቸውን ያረጋግጡ፡-

• Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W)
• Concealed Mounting Bracket
• Back Entry Plate with Cable Clamps
• የመጫኛ ሃርድዌር (ዊንጮች፣ መልሕቆች)
• መመሪያ መመሪያ

4. ዝርዝሮች

ምስል 4.1: የምርት ልኬቶች

5. መጫን

IMPORTANT: This heater requires a 240V (or 208V) hardwired connection. It is not a plug-in unit. All wiring must be done by a qualified electrician.

Image 5.1: Hardwired Connection Requirement

5.1 ማሞቂያውን መትከል

1. Choose a suitable wall location, ensuring at least 3 feet (0.9 m) clearance from any combustible materials in front, and adequate clearance from sides and rear.
2. Use the provided mounting bracket and hardware. The heater is designed for surface-mount installation.
3. Mark the drilling points on the wall using the concealed bracket as a template.
4. Drill pilot holes and insert the appropriate wall anchors (if needed for drywall).
5. የተገጠሙትን ዊንጮችን በመጠቀም ግድግዳውን ከግድግዳው ጋር ያስቀምጡት.
6. Ensure the bracket is level and securely fastened to support the heater's weight.

Image 5.2: Concealed Mounting Bracket

5.2 የኤሌክትሪክ ሽቦ

1. በዋናው የወረዳ ማብሪያ / ማጥፊያ ላይ ኃይል መጥፋቱን ያረጋግጡ።
2. Route the 240V (or 208V) electrical supply wires to the heater's back entry plate.
3. Connect the supply wires to the heater's terminals using the cable clamps, following the wiring diagram in the full owner's manual.
4. ሁሉንም ግንኙነቶች ይጠብቁ እና ምንም ባዶ ሽቦዎች እንዳይጋለጡ ያረጋግጡ።
5. Carefully attach the heater to the mounted bracket, ensuring it locks into place.
6. በዋናው የወረዳ ተላላፊ ላይ ኃይልን ወደነበረበት ይመልሱ።

6. የአሠራር መመሪያዎች

Your Stelpro convector heater features a built-in electronic thermostat for precise temperature control.

Image 6.1: Built-in Electronic Thermostat

6.1 የሙቀት መጠኑን ማዘጋጀት

• Use the up/down arrows on the thermostat's LCD screen to adjust the desired room temperature.
• The heater will automatically maintain the set temperature.

6.2 የአሠራር ሁነታዎች

• ራስ-ሰር ሁነታ: This mode can be programmed to automatically lower the temperature at night, contributing to energy savings. Refer to the full owner's manual for programming details.
• የደህንነት ሁኔታ This feature allows you to lock the maximum setpoint temperature for safety, preventing accidental or unauthorized adjustments to higher temperatures.

7. ጥገና

መደበኛ ጥገና የሙቀት ማሞቂያዎትን ጥሩ አፈፃፀም እና ረጅም ጊዜ ያረጋግጣል.

• ማጽዳት፡ Ensure the heater is turned off and cool before cleaning. Use a soft, damp ውጫዊውን ለመጥረግ ጨርቅ. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን አይጠቀሙ.
• Air Grilles: Periodically check the air intake (bottom) and discharge (front) grilles for dust or debris accumulation. Gently vacuum or brush away any blockages to maintain efficient airflow.
• ዓመታዊ ምርመራ፡- It is recommended to have a qualified electrician inspect the heater and its wiring connections annually.

8. መላ መፈለግ

ማሞቂያዎ በትክክል የማይሰራ ከሆነ፣ ድጋፍ ሰጪን ከማነጋገርዎ በፊት የሚከተሉትን የተለመዱ ጉዳዮች ያማክሩ፦

• ማሞቂያ የማይበራ; Check the main circuit breaker to ensure power is supplied. Verify that the heater is securely mounted to the wall, as it contains a safety switch that prevents operation if not properly installed.
• በቂ ያልሆነ ሙቀት; Ensure the thermostat is set to a temperature higher than the current room temperature. Check for any obstructions around the air grilles. Verify the heater's wattage matches the room size (up to 200 sq ft for 2000W/240V).
• ያልተለመዱ ድምፆች; While designed for quiet operation, minor expansion/contraction noises may occur during heating/cooling cycles. If loud or persistent noises occur, disconnect power and contact support.
• የቴርሞስታት ማሳያ ችግሮች፡ If the LCD display is blank or erratic, try resetting the circuit breaker for a few minutes.

For persistent issues or complex problems, please refer to the warranty and support section.

9. ዋስትና እና ድጋፍ

Your Stelpro Ultra-Quiet Wall Convector Heater (ASHC2002W) is backed by the following warranties:

• የ5-አመት የተወሰነ ዋስትና on the overall unit.
• የዕድሜ ልክ ዋስትና በማሞቂያው አካል ላይ.
• የ3-ዓመት ዋስትና on electronic components.

For technical support, warranty claims, or further assistance, please contact Stelpro customer service. Refer to the contact information provided in your owner's manual or visit the official Stelpro webጣቢያ.