ECHOGEAR EGAV-CMIWP2 In-Wall TV Power and Cable Management Kit (2 AC Outlets, White)

1. መግቢያ

The ECHOGEAR EGAV-CMIWP2 In-Wall TV Power and Cable Management Kit is designed to safely conceal power and low voltage cables behind your wall-mounted television. This kit provides a clean, organized appearance by eliminating visible wires, while offering convenient access to power outlets and cable pass-throughs. It includes all necessary components for a straightforward installation.

2. የደህንነት መረጃ

Please read and understand all instructions before installation. Failure to follow these instructions may result in property damage, personal injury, or voiding your warranty. If you have any questions, contact ECHOGEAR customer support.

• የኤሌክትሪክ ደህንነት; This kit involves working with electrical wiring. Ensure power is turned off at the circuit breaker before beginning any electrical work. If you are unsure about electrical installations, consult a qualified electrician.
• የግድግዳ መዋቅር; This kit is designed for installation in drywall. Do not install in plaster, concrete, or other materials without appropriate tools and expertise. Verify there are no electrical wires, plumbing, or gas lines behind the wall in the intended installation area.
• የኬብል መስመር፡ Only route low voltage cables (HDMI, Ethernet, audio) through the brush pass-through. Power cables must be routed through the designated power module.

3. የጥቅል ይዘቶች

መጫኑን ከመጀመርዎ በፊት ሁሉም ክፍሎች መኖራቸውን ያረጋግጡ-

• Top Power Box (Recessed Dual AC Outlet Module)
• Bottom Box (Low Voltage Cable Pass-Through Module)
• የመጫኛ ቅንፍ
• የግድግዳ አብነት
• ደረቅ ግድግዳ
• 6-foot Extension Cord with Low Profile ይሰኩት
• የመጫኛ ብሎኖች

የቦክስ መክፈቻ ቪዲዮ

This video provides a detailed unboxing of the ECHOGEAR TV Cord Hider, showcasing all components included in the kit, such as the in-wall modules, saw, and extension cord.

4. Tools Required (Not Included, unless specified)

• እርሳስ
• የቴፕ መለኪያ
• ደረጃ
• ስቲድ ፈላጊ
• Screwdriver (የፊሊፕ ጭንቅላት)
• Drywall Saw (ተካትቷል።)
• Wall Template (ተካትቷል።)

5. የመጫኛ መመሪያዎች

Follow these steps for a secure and clean installation:

መጫኑ አልቋልview ቪዲዮ

This video demonstrates the complete installation process of the ECHOGEAR In-Wall TV Power and Cable Management Kit, showcasing how to conceal all TV cables for a clean setup.

1. የዕቅድ አቀማመጥ፡- Determine the ideal locations for the top (power) and bottom (low voltage) modules. Ensure they are vertically aligned and within 6 feet of each other to accommodate the extension cord. Use a stud finder to avoid cutting into studs.
2. Mark and Cut Openings: Use the provided wall template and a pencil to trace the cutouts for both modules. Carefully use the included drywall saw to cut the openings.



3. የመንገድ ኬብሎች፡ Before installing the modules, route your low voltage cables (HDMI, Ethernet, etc.) through the wall from the top opening to the bottom opening.
4. Install Top Power Module: Insert the top power module into the upper opening. Secure it by tightening the screws, which will engage the mounting wings against the drywall.



5. Install Bottom Low Voltage Module: Insert the bottom low voltage module into the lower opening. Secure it similarly by tightening the screws.
6. የግንኙነት ኃይል; Plug the included 6-foot extension cord into the bottom module. Route the other end of the extension cord to a nearby wall outlet and plug it in.
7. መሣሪያዎችን ማገናኘት; Plug your TV's power cord into one of the recessed AC outlets in the top module. Connect your low voltage cables (HDMI, Ethernet) through the brush pass-through in the top module to your TV.



8. የመጨረሻ ፍተሻ፡- Ensure all connections are secure and the modules are flush with the wall.

Detailed Installation Video

This video offers a comprehensive, step-by-step guide to installing the ECHOGEAR In-Wall Power Kit, ensuring a smooth and successful setup for hiding TV cables.

6. የአሠራር መመሪያዎች

Once installed, the ECHOGEAR In-Wall TV Power and Cable Management Kit operates seamlessly. Simply plug your TV and other devices into the top recessed outlets. Route any low voltage cables through the brush pass-through. The system is designed for continuous use, providing power and cable organization without further interaction.

7. ጥገና

The ECHOGEAR In-Wall TV Power and Cable Management Kit requires minimal maintenance. Periodically check the connections to ensure they remain secure. Clean the visible surfaces with a soft, dry cloth. Do not use abrasive cleaners or solvents.

8. መላ መፈለግ

• No Power to TV/Devices:
  • Ensure the 6-foot extension cord is securely plugged into both the bottom module and a functioning wall outlet.
  • Check your home's circuit breaker to ensure power is supplied to the wall outlet.
  • Verify the TV/device power cords are fully inserted into the top module's AC outlets.
• Cables Falling Inside Wall:
  • The top module features a patented cable catcher. Ensure cables are properly routed through this mechanism to prevent them from falling.
  • If cables are still falling, temporarily remove the top module and re-secure the cables within the catcher before re-installing.
• Difficulty Routing Cables:
  • Ensure the path between the top and bottom openings is clear of obstructions.
  • For very tight spaces, consider using a fish tape or similar tool to guide cables.

9. ዝርዝሮች

10. ዋስትና እና ድጋፍ

For warranty information or technical assistance, please visit the official ECHOGEAR webበቀጥታ የደንበኛ ድጋፋቸውን ያግኙ ወይም ያግኙ። የግዢ ደረሰኝዎን ለዋስትና ጥያቄዎች ያስቀምጡ።

ECHOGEAR Webጣቢያ፡ Visit the ECHOGEAR Store on Amazon