መመሪያ መመሪያ

1. መግቢያ

This manual provides detailed instructions for the installation, operation, and maintenance of the Evotech Performance Crash Protection system, Model PRN014714-02, designed specifically for the Triumph Thruxton RS (2020+) motorcycle.

The Evotech Performance Crash Protection system is engineered to offer critical protection to your motorcycle's engine and frame components in the event of a fall or slide. By absorbing impact energy and providing a sliding surface, these protectors aim to minimize damage to the motorcycle's vital parts.

2. ጠቃሚ የደህንነት መረጃ

ማስጠንቀቂያ፡-

• Installation of this product requires mechanical aptitude and proper tools. If you are unsure about any step, it is highly recommended to seek assistance from a qualified motorcycle technician.
• Always ensure the motorcycle is stable and securely supported before beginning any installation work. Use a paddock stand or center stand.
• በሚጫኑበት ጊዜ የደህንነት መነጽሮችን እና ጓንቶችን ጨምሮ ተገቢ የግል መከላከያ መሳሪያዎችን (PPE) ይልበሱ።
• Do not modify the product or use it for purposes other than its intended design. Unauthorized modifications can compromise safety and performance.
• After installation, always check all fasteners for proper torque and ensure no components interfere with the motorcycle's operation (e.g., steering, suspension, controls).
• Regularly inspect the crash protection system for any signs of damage, wear, or loose fasteners. Replace damaged components immediately.

3. የጥቅል ይዘቶች

Please verify that all components listed below are present and undamaged before proceeding with the installation.

• Crash Bobbins (2x)
• Mounting Spindle/Bar (1x)
• የመጫኛ ቅንፎች (2x)
• Fasteners and Washers (various sizes)
• የመጫኛ መመሪያዎች (ይህ መመሪያ)

ምስል 3.1፡ Complete Evotech Performance Crash Protection assembly, showing the two bobbins, central spindle, and mounting brackets.

4. ማዋቀር እና መጫን

Follow these steps carefully to install your Evotech Performance Crash Protection system.

4.1. ዝግጅት

1. Park the motorcycle on a firm, level surface.
2. Secure the motorcycle using a paddock stand or center stand to ensure stability.
3. Allow the engine and exhaust components to cool down completely before handling.
4. Gather all necessary tools, which typically include:
   • የሶኬት ስብስብ እና ዊንጮች
   • Torque ቁልፍ
   • የሄክስ ቁልፍ ስብስብ
   • Thread-locking compound (medium strength, e.g., Loctite 243)

4.2. የመጫኛ ደረጃዎች

1. የመጫኛ ነጥቦችን መለየት; Locate the designated mounting points on your Triumph Thruxton RS frame, typically near the engine mounts. Refer to your motorcycle's service manual if unsure.
2. የመጫኛ ቅንፎችን አያይዝ፡ Secure the provided mounting brackets to the motorcycle's frame using the appropriate fasteners. Ensure they are correctly oriented as shown in the product images. Apply a small amount of medium-strength thread-locking compound to the bolt threads before tightening.
   

   ምስል 4.1፡ View of the crash bobbin installed on the right side of the motorcycle engine, showing its proximity to the exhaust header and engine casing.
3. Insert Spindle/Bar: Slide the main spindle/bar through the mounting points and the attached brackets. Ensure it passes cleanly without obstruction.
4. Attach Crash Bobbins: Thread one crash bobbin onto each end of the spindle/bar. Hand-tighten initially.
   

   ምስል 4.2፡ View of the crash bobbin installed on the left side of the motorcycle engine, illustrating its secure fit and protective positioning.

5. የመጨረሻ ማጠንከሪያ; Using a torque wrench, tighten all fasteners to the manufacturer's specified torque settings. Refer to your motorcycle's service manual for frame bolt torque specifications, and any specific torque values provided with the Evotech Performance product. If no specific torque is provided for the bobbins, tighten them securely but do not overtighten.
6. የመጨረሻ ፍተሻ፡- Double-check all installed components to ensure they are secure, do not interfere with any moving parts (e.g., handlebars, suspension travel), and are clear of hot components like the exhaust.

5. ኦፕሬሽን

The Evotech Performance Crash Protection system operates passively. Once correctly installed, it functions as a sacrificial component designed to absorb impact energy and provide a sliding surface during a fall or slide, thereby reducing potential damage to the motorcycle's frame, engine casings, and other critical components.

No active user input is required for its operation. Its effectiveness relies on proper installation and regular inspection.

6. ጥገና

To ensure the continued effectiveness and safety of your crash protection system, regular maintenance is recommended:

• ወቅታዊ ምርመራ; Visually inspect the crash bobbins and mounting hardware regularly (e.g., every 1,000 km or monthly) for any signs of damage, cracks, deformation, or excessive wear.
• ማያያዣ ቼክ፡ Check all mounting bolts for tightness. Vibrations from motorcycle operation can sometimes loosen fasteners. Re-torque to specifications if necessary.
• ማጽዳት፡ Clean the bobbins and surrounding areas with a mild soap and water solution. Avoid harsh chemicals that could degrade the material.
• Post-Incident Inspection: In the event of a fall or impact, no matter how minor, thoroughly inspect the crash protection system and the motorcycle's frame for any damage. Even minor impacts can compromise the integrity of the bobbins or mounting points. Replace any damaged components immediately.

7. መላ መፈለግ

ይህ ክፍል ሊያጋጥሙዎት የሚችሉ የተለመዱ ጉዳዮችን ይመለከታል።

8. ዝርዝሮች

• ሞዴል፡ PRN014714-02
• የምርት ዓይነት፡- Crash Protection / Engine Guard
• ተኳኋኝነት Triumph Thruxton RS (2020+)
• አምራች፡ የኢቮቴክ አፈጻጸም
• አቀማመጥ፡- Front (Engine Area)
• ቀለም፡ ጥቁር
• የእቃው ክብደት፡ በግምት 2.58 ኪ.ግ
• የጥቅል መጠኖች: በግምት 37.5 x 27 x 11.4 ሴ.ሜ
• ማሰባሰብ ያስፈልጋል፡ አዎ

9. ዋስትና እና ድጋፍ

For warranty information, technical support, or to purchase replacement parts, please contact Evotech Performance directly or refer to their official webጣቢያ. ለማንኛውም የዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።

Evotech Performance Official Webጣቢያ፡ www.evotech-performance.com