Technoline WS8016

Technoline WS 8016 Digital Radio-Controlled Wall Clock

መመሪያ መመሪያ

1. መግቢያ

The Technoline WS 8016 is a modern radio-controlled wall clock designed for clear readability and versatile display options. It automatically synchronizes with the DCF-77 radio signal for precise timekeeping. This manual provides detailed instructions for setting up and operating your clock.

ቁልፍ ባህሪያት የሚከተሉትን ያካትታሉ:

2. ጠቃሚ የደህንነት መረጃ

3. የጥቅል ይዘቶች

ማስታወሻ፡- 2 x AA Mignon LR06 batteries are not included and must be purchased separately.

4. ምርት አብቅቷልview

Familiarize yourself with the clock's display and controls.

ፊት ለፊት view of the Technoline WS 8016 digital clock display showing time, date, temperature, humidity, and alarm icons.

ምስል 1፡ Main display of the Technoline WS 8016 clock. It clearly presents the current time (e.g., 10:30), the radio signal reception icon, two alarm indicators (1 M-F, 2 S-S), indoor temperature (e.g., 23.2°C), weekday (e.g., MONTAG), date (e.g., 29/JAN/2019), and indoor humidity (e.g., 76% RH).

Technoline WS 8016 digital clock with dimensions indicated: 22.5cm width and 14.3cm height.

ምስል 2፡ Physical dimensions of the Technoline WS 8016 clock, measuring 22.5 cm in width and 14.3 cm in height.

Control Buttons (Typically located on the back or side):

5. ማዋቀር

5.1 የባትሪ ጭነት

  1. የባትሪውን ክፍል ሽፋን ከሰዓት ጀርባ ያግኙ።
  2. ሽፋኑን ያስወግዱ.
  3. Insert 2 x AA Mignon LR06 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
  4. የባትሪውን ክፍል ደህንነቱ በተጠበቀ ሁኔታ ይተኩ.

5.2 Automatic Time Synchronization (DCF-77)

After battery insertion, the clock will automatically begin searching for the DCF-77 radio signal. This process can take several minutes to an hour, depending on your location and environmental conditions.

6. የአሠራር መመሪያዎች

6.1 የእጅ ሰዓት ቅንብር

If the radio signal is unavailable or you prefer to set the time manually:

  1. ተጭነው ይያዙት። አዘጋጅ button for approximately 3 seconds to enter the manual setting mode. The first adjustable value will flash.
  2. የሚለውን ተጠቀም UP or ታች buttons to adjust the flashing value (e.g., hour, minute).
  3. ተጫን አዘጋጅ briefly to confirm the current setting and move to the next adjustable parameter.
  4. Repeat steps 2 and 3 for all settings: hour, minute, 12/24h format, time zone, year, month, day, weekday language, and temperature unit.
  5. To exit setting mode, press the MODE button or wait for 15 seconds without pressing any button.

6.2 12/24 ሰዓት ቅርጸት

በመደበኛ ጊዜ ማሳያ ሁነታ, ይጫኑ 12/24 በ12-ሰዓት (በ AM/PM አመልካች) እና በ24-ሰዓት ቅርጸቶች መካከል የመቀያየር ቁልፍ።

6.3 የሰዓት ሰቅ አቀማመጥ

During manual time setting (Section 6.1), you can adjust the time zone offset (e.g., +1, -1 hour) if your location is outside the standard DCF-77 signal's time zone.

6.4 Date and Weekday Language

During manual time setting (Section 6.1), you can select the display language for the weekday. Options typically include English, German, French, Spanish, Italian, Dutch, and Danish.

6.5 የሙቀት መለኪያ

በመደበኛ ጊዜ ማሳያ ሁነታ, ይጫኑ ° ሴ / ° ፋ button to switch the indoor temperature display between Celsius and Fahrenheit.

6.6 የማንቂያ ቅንብሮች

The clock features two independent alarms: Alarm 1 (typically for Monday-Friday) and Alarm 2 (typically for Saturday-Sunday).

  1. የሚለውን ይጫኑ ማንቂያ button repeatedly to cycle through Alarm 1, Alarm 2, and Alarm Off display modes.
  2. To set an alarm, select the desired alarm (Alarm 1 or Alarm 2) and then press and hold the ማንቂያ button for approximately 3 seconds. The alarm hour will flash.
  3. የሚለውን ተጠቀም UP or ታች የማንቂያ ሰዓቱን ለማስተካከል ቁልፎች. ተጫን ማንቂያ to confirm and move to the alarm minute setting.
  4. የሚለውን ተጠቀም UP or ታች buttons to adjust the alarm minute. Press ማንቂያ ለማረጋገጥ እና ከማንቂያ ቅንብር ሁነታ ለመውጣት።
  5. To activate or deactivate an alarm, briefly press the ማንቂያ button when the alarm time is displayed. An alarm icon (e.g., a bell) will appear on the display when the alarm is active and disappear when it is deactivated.

7. እንክብካቤ እና ጥገና

ማጽዳት፡ Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing.

የባትሪ መተካት፡ Replace the batteries when the low battery indicator appears on the display. Always replace both batteries simultaneously with new ones of the same type. Do not mix old and new batteries or different battery types.

8. የመላ መፈለጊያ መመሪያ

ችግርመፍትሄ
No time display / Incorrect timeCheck battery installation and ensure batteries have sufficient charge. Ensure the clock is within range of the DCF-77 signal. If the signal is weak or unavailable, manually set the time as described in Section 6.1.
Radio signal icon not displayed or flashing continuouslyMove the clock closer to a window or an open area. Avoid placing it near large metal objects or electronic devices (TVs, computers, microwaves) that may cause interference. Wait for the next automatic synchronization attempt.
Temperature/Humidity readings are inaccurateEnsure the clock is not exposed to direct sunlight, drafts, or heat sources (e.g., radiators, appliances). Allow time for readings to stabilize after initial setup or relocation.
ማንቂያ አይሰማም።Verify that the alarm is activated (alarm icon displayed). Check that the alarm time is set correctly. Ensure batteries are not depleted.

9. ቴክኒካዊ ዝርዝሮች

10. ዋስትና እና የደንበኛ ድጋፍ

This product comes with a standard manufacturer's warranty. Please refer to the warranty card or documentation included with your purchase for specific terms and conditions.

For technical support, troubleshooting assistance, or service inquiries, please contact your retailer or visit the official Technoline webለተጨማሪ መረጃ ጣቢያ።

ተዛማጅ ሰነዶች - WS8016

ቅድመview WS8014 በሬዲዮ ቁጥጥር የሚደረግበት ሰዓት እና የአየር ሁኔታ ጣቢያ የተጠቃሚ መመሪያ
የተጠቃሚ መመሪያ ለ WS8014 በሬዲዮ ቁጥጥር የሚደረግበት ሰዓት እና የአየር ሁኔታ ጣቢያ፣ የሽፋን ባህሪያት፣ ማዋቀር፣ አሰራር፣ ዝርዝር መግለጫዎች እና የደህንነት መረጃ።
ቅድመview WT 498 በሬዲዮ ቁጥጥር የሚደረግበት የሰዓት መመሪያ መመሪያ
ይህ የመመሪያ መመሪያ በWT 498 በሬዲዮ ቁጥጥር የሚደረግበት ሰዓትን ስለማዘጋጀት፣ ስለመሰራት እና መላ መፈለግ፣ አውቶማቲክ የሰዓት ማመሳሰልን፣ የማንቂያ ተግባራትን እና የሙቀት ማሳያን የሚያሳይ ዝርዝር መመሪያ ይሰጣል።
ቅድመview የጨረቃ ደረጃ የሰዓት መመሪያ መመሪያ - በሬዲዮ ቁጥጥር የሚደረግበት ጊዜ, ቀን, የሙቀት መጠን
አጠቃላይ የማስተማሪያ መመሪያ ለጨረቃ ደረጃ ሰዓት፣ ዝርዝር ማዋቀር፣ ባህሪያት፣ በእጅ ቅንጅቶች እና በቴክኖላይን DCF-77 በራዲዮ ቁጥጥር የሚደረግበት የሰዓት ቆጣሪ።
ቅድመview WT280 በሬዲዮ ቁጥጥር የሚደረግበት የሰዓት መመሪያ መመሪያ
ይህ ማኑዋል WT280 የሬዲዮ ቁጥጥር የተደረገበትን ሰዓት ለማቀናበር እና ለመስራት መመሪያዎችን ይሰጣል፣ እንደ በእጅ ሰዓት ቅንብር፣ የማንቂያ ተግባራት፣ የሙቀት ማሳያ እና የቋንቋ ምርጫ ያሉ ባህሪያትን ያካትታል።
ቅድመview WS 6750 የአየር ሁኔታ ጣቢያ የተጠቃሚ መመሪያ - TechnoLine
አጠቃላይ የተጠቃሚ መመሪያ ለ TechnoLine WS 6750 የአየር ሁኔታ ጣቢያ፣ ማዋቀር፣ ባህሪያት፣ አሰራር እና መላ ፍለጋ። ስለ ሙቀት፣ እርጥበት፣ የአየር ግፊት፣ ጊዜ፣ ማንቂያዎች እና ተጨማሪ ይወቁ።
ቅድመview TechnoLine WT 753 በራዲዮ ቁጥጥር የሚደረግበት የማንቂያ ሰዓት፡ የተጠቃሚ መመሪያ እና የማዋቀር መመሪያ
አጠቃላይ መመሪያ ለ TechnoLine WT 753 በራዲዮ ቁጥጥር የሚደረግበት የማንቂያ ሰዓት፣ ፈጣን ቅንብርን፣ የሰዓት ምልክት መቀበልን፣ የማንቂያ ቅንብሮችን፣ የጥንቃቄዎችን እና የማስወገጃ መረጃዎችን የሚሸፍን።