xTool 1064nm Infrared Laser Module for D1 Pro Instruction Manual

1. መግቢያ

The xTool 1064nm Infrared Laser Module is designed to enhance the capabilities of your xTool D1 Pro laser engraver, specifically for engraving on various metals and plastics. This module features a 0.03mm ultra-fine laser spot and 15KW peak power, enabling precise and detailed work on materials typically challenging for blue diode lasers.

This manual provides essential information for the safe and effective use of your laser module, including setup, operation, and maintenance guidelines.

2. የደህንነት ጥንቃቄዎች

• Always wear safety goggles: Infrared lasers are invisible and can cause severe eye damage. Ensure appropriate laser safety goggles are worn by all individuals in the operating area.
• የአየር ማናፈሻ; Operate the laser engraver in a well-ventilated area to dissipate fumes and smoke produced during engraving.
• ተቀጣጣይ ቁሶች; Avoid engraving flammable materials or operating near combustible substances.
• ያልተጠበቀ ክዋኔ; Never leave the device unattended while it is working.
• ኃይል አጥፋ፡ Always power off and unplug the device before performing any maintenance or module changes.

3. የማዋቀር መመሪያ

3.1 ማራገፊያ እና አካላት

ከመጀመርዎ በፊት የሚከተሉትን ክፍሎች መኖራቸውን ያረጋግጡ፦

• xTool 1064nm Infrared Laser Module
• የደህንነት መነጽሮች
• የጽዳት መሳሪያዎች
• xTool D1 Pro (main unit, sold separately)
• Laptop with xTool Creative Space software
• RA2 Pro Rotary Attachment (optional, for cylindrical objects)

3.2 ሌዘር ሞጁል መጫን

The 1064nm Infrared Laser Module is designed for quick and easy installation on your D1 Pro. This process involves replacing the existing laser module.

1. ነባሩን ሞጁል አስወግድ፡ Loosen the toggle screw on the current laser module. Gently pull the module upwards to detach it from the machine. Disconnect the cable from the top of the module.
2. አዲስ ሞጁል ያገናኙ፦ Connect the cable to the top of the 1064nm Infrared Laser Module.
3. አዲስ ሞጁል ጫን Insert the new module into the machine's carriage. Tighten the toggle screw to secure it in place.

ምስል፡ One-step installation of the xTool 1064nm Infrared Laser Module. This image illustrates the simple process of installing the laser module onto the D1 Pro, highlighting its ease of setup.

3.3 Connecting RA2 Pro (for Rings)

For engraving cylindrical objects like rings, the RA2 Pro rotary attachment is required. Ensure the honeycomb panel is removed and the D1 Pro is raised to accommodate the RA2 Pro.

1. Prepare RA2 Pro: Secure the ring onto the appropriate pillars of the RA2 Pro, ensuring it is stable.
2. Connect RA2 Pro: Disconnect the Y-axis motor cable from the D1 Pro. Connect the RA2 Pro cable to the Y-axis port on the D1 Pro.
3. Place RA2 Pro: Position the RA2 Pro onto the D1 Pro's working area.

4. የአሠራር መመሪያዎች

4.1 የቁሳቁስ ተኳሃኝነት

The 1064nm Infrared Laser Module is specifically designed for engraving on a wide range of materials, including:

• ብረቶች፡ Gold, Silver, Platinum, Copper, Aluminum, Zinc, Titanium, Iron, Stainless Steel, Metal Oxides, and Alloys.
• ፕላስቲክ፡- Various types of plastic and acrylic, including opaque plastic and opaque acrylic.
• ሌሎች ቁሳቁሶች፡ Leather, Painted Ceramics, Rock, Glass, Circuit Boards, Paper.

ምስል፡ Engraving on Most Metals. This image showcases the module's capability to engrave on different metal types, including gold, silver, copper, and aluminum.

ምስል፡ Diverse Material Compatibility. This image displays a wide array of materials that can be engraved with the 1064nm laser module, from various metals to plastics, leather, and more.

4.2 በሌዘር ላይ ማተኮር

Accurate focusing is crucial for optimal engraving results.

1. Lower Setting Bar: Pull down the setting bar located on the side of the laser module.
2. ቁመትን አስተካክል; Loosen the toggle screw and move the laser module up or down until the tip of the setting bar just touches the highest surface of your material.
3. ደህንነቱ የተጠበቀ ሞጁል፡ Tighten the toggle screw to lock the module in place.
4. Retract Setting Bar: Push the setting bar back up into its original position.

4.3 Using xTool Creative Space Software

The xTool Creative Space software is used to design and control your engraving projects.

1. መሣሪያን ያገናኙ; Ensure your D1 Pro is connected to your computer via USB.
2. ሶፍትዌር ክፈት፡ Launch xTool Creative Space.
3. Design/Import: Create your design or import an existing one. For text, use the text tool and input your desired message.
4. መለኪያዎችን አዘጋጅ፡
   • መጠን፡ Adjust the size of your design. Ensure the lock icon is engaged to maintain aspect ratio.
   • የሌዘር ሁነታ፡ Select "Laser flat" for flat materials or "Laser cylindrical" for use with the RA2 Pro. If using RA2 Pro, select "Chuck" mode and input the diameter of your object (e.g., 24mm for a ring).
   • ቁሳቁስ፡ Choose "stainless steel (304)" or the appropriate material from the dropdown. The software will automatically suggest reference parameters.
   • ተግባር፡- Select "Engrave".
   • ኃይል/ፍጥነት፡ Adjust power and speed settings as needed. For stainless steel, typical settings might be 100% power and 80mm/s speed.
5. ፍሬም መፍጠር፡ Click the "Framing" button in the software. The laser will outline the engraving area on your material. Adjust the material's position if necessary. Press the button on the D1 Pro to start framing.
6. መሳል ይጀምሩ Once framing is complete and you are satisfied with the placement, click "Start" in the software, then press the button on the D1 Pro to begin the engraving process.

ምስል፡ Ultra-Fine Engraving Result. This image highlights the precision of the 0.03mm laser spot, demonstrating significantly finer detail compared to larger spot sizes.

ምስል፡ No Burn Marks on Materials. This image illustrates the clean engraving results on acrylic and plastic using the 1064nm laser, contrasting with the burn marks left by a 455nm laser.

5. ጥገና

መደበኛ ጥገና የሌዘር ሞጁልዎን ረጅም ዕድሜ እና ጥሩ አፈፃፀም ያረጋግጣል።

• Cleaning Engraved Items: After engraving, use alcohol wipes or a soft cloth with alcohol to clean the engraved surface of your material. This removes any residue and enhances the clarity of the engraving.
• የሌዘር ሌንስ ጽዳት፡ Periodically inspect the laser lens for dust or debris. Use a specialized lens cleaning kit or a soft, lint-free cloth with lens cleaning solution to gently clean the lens. Avoid abrasive materials.
• አጠቃላይ ጽዳት; Keep the D1 Pro machine and the laser module free from dust and debris. Use a soft brush or compressed air to clean surfaces.

6. ዝርዝሮች

7. የዋስትና መረጃ

The xTool 1064nm Infrared Laser Module comes with a የ 1 ዓመት የአምራች ዋስትና. Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official xTool webጣቢያ ወይም የደንበኛ ድጋፍን ያነጋግሩ።

8. የደንበኛ ድጋፍ

For any questions, technical assistance, or support, please utilize the following resources:

• የኢሜል ድጋፍ ዝርዝር ጥያቄዎችን ለማግኘት በኢሜል ያግኙን።
• የቀጥታ ውይይት፡- Access live chat for immediate assistance.
• የስልክ ድጋፍ፡ የቴክኒክ አገልግሎት ቡድናችንን በስልክ ያግኙ።
• የመስመር ላይ ማህበረሰብ፡ Join the xTool Facebook group for community support and tips.

ምስል፡ Multi-Channel Service. This image illustrates the various support channels available for xTool users, including email, live chat, phone, and community forums.

ምስል፡ Technical Service Team. A friendly face from the xTool technical support team, emphasizing readily available assistance.