1. መግቢያ
This manual provides detailed instructions for the setup, operation, and maintenance of your Newentor Weather Station models Q3 and Q5. These devices are designed to provide accurate indoor and outdoor temperature and humidity readings, weather forecasts, and other useful environmental data. Please read this manual thoroughly before using the product to ensure proper function and longevity.
2. ምርት አብቅቷልview
The Newentor Weather Station system includes a main display console (either Q3 or Q5) and one or more remote sensors. The Q3 model features a 7.5-inch LCD screen, while the Q5 model has a 6-inch screen and supports up to three remote sensors.
2.1 Main Display Console Features
- Indoor/Outdoor Temperature and Humidity Display
- Weather Forecast with Graphical Icons
- Barometric Pressure Display and Trend
- የጊዜ እና የቀን ማሳያ
- የማንቂያ ሰዓት ከማሸለብ ተግባር ጋር
- Moon Phase Display (Q3)
- Temperature Alerts (Q3)
- WWVB Signal Function for Automatic Time Synchronization (Q5)
2.2 የርቀት ዳሳሽ ባህሪያት
- Measures Outdoor Temperature and Humidity
- Wireless Transmission to Main Console (up to 200ft/60m)
- White Casing Designed to Reduce Heat Absorption for More Accurate Readings
Image: Newentor Weather Station Q3 display console shown with one remote sensor and illustrative icons representing its multi-functionality including thermometer, barometer, alarm clock, and weather forecast.
Image: Newentor Weather Station Q5 display console illustrating indoor temperature and humidity alongside readings from three distinct outdoor remote sensors, labeled for clarity.
3. ማዋቀር
3.1 የባትሪ ጭነት
- Main Display Console: Open the battery compartment on the back of the main unit. Insert the required batteries (typically AA or AAA, refer to the battery compartment label) according to the polarity markings (+/-). Close the compartment.
- የርቀት ዳሳሾች Open the battery compartment on each remote sensor. Insert the required batteries (typically AA or AAA) according to the polarity markings. Close the compartment.
Note: It is recommended to insert batteries into the remote sensors first, then into the main display console to ensure proper synchronization.
3.2 ዳሳሽ አቀማመጥ
For accurate outdoor readings, place remote sensors in a shaded, dry location, away from direct sunlight and heat sources. Ensure the sensor is protected from rain and snow. The maximum wireless transmission range is approximately 200 feet (60 meters) in open air. Walls and other obstructions may reduce this range.
Image: The Newentor Weather Station display console and a remote sensor are shown, with the sensor positioned outdoors to demonstrate the 200ft/60m wireless transmission range for outdoor monitoring.
Image: The Newentor Weather Station display console is depicted, illustrating its capability to connect with up to three remote sensors, allowing for monitoring of different locations (CH1, CH2, CH3).
3.3 Initial Synchronization and Settings
- After battery installation, the main console will automatically search for remote sensors. This may take a few minutes. The outdoor temperature/humidity will appear once connected.
- ሰዓት እና ቀን፡- For Q5 models, the WWVB signal will attempt to synchronize the time automatically. If manual setting is required or for Q3 models, press the 'SET' button to enter time/date setting mode. Use 'UP' or 'DOWN' buttons to adjust values and 'SET' to confirm and move to the next setting.
- የሙቀት ክፍሎች; Press the '℃/℉' button (if available) or use the 'SET' menu to switch between Celsius and Fahrenheit.
- የባሮሜትሪክ ግፊት አሃዶች፡ If applicable, use the 'SET' menu to select units (e.g., inHg, hPa/mb).
Image: The Newentor Weather Station display console with various colored labels for indoor, outside, baby room, and north side, demonstrating the option to customize sensor location labels.
4. የአሠራር መመሪያዎች
4.1 የማሳያ መረጃ
The main display console provides a comprehensive overview የአሁኑ የአየር ሁኔታ እና የጊዜ መረጃ፡-
- የቤት ውስጥ ክፍል፡ Displays current indoor temperature and humidity.
- Outdoor Section(s): Displays current outdoor temperature and humidity from connected remote sensor(s).
- የአየር ሁኔታ ትንበያ: Icons (e.g., sunny, cloudy, rainy) indicate the predicted weather for the next 12-24 hours.
- የባሮሜትሪክ ግፊት; Shows current atmospheric pressure and a trend indicator (rising, falling, stable).
- ሰዓት/ቀን፡ የአሁኑ ሰዓት፣ የሳምንቱ ቀን እና ቀን።
- የጨረቃ ደረጃ; (Q3 only) Displays the current phase of the moon.
Image: The Newentor Weather Station's colorful large screen display, showcasing various data points including weather forecast, humidity, temperature, time, alarm, alerts, and barometric pressure.
4.2 የአዝራር ተግባራት
Refer to the specific button labels on your console for exact functions. Common buttons include:
- SET: ወደ ቅንብር ሁነታ ይገባል፣ ምርጫዎችን ያረጋግጣል።
- UP/DOWN (or +/ -): Adjusts values in setting mode, cycles through display options.
- CH (ሰርጥ) ፦ Cycles through remote sensor channels (for Q5 with multiple sensors).
- ዋስትና ወደ ማንቂያ ቅንብር ሁነታ ይገባል፣ ማንቂያውን ያነቃል/ያቦዝናል።
- ማንቂያ፡- (Q3 only) Sets temperature alerts.
- SNOOZE / LIGHT Activates snooze during an alarm, adjusts backlight brightness.
4.3 WWVB Signal Function (Q5)
The Q5 model features automatic time synchronization via the WWVB radio signal. The station will attempt to receive this signal daily, typically overnight. A signal icon will appear on the display when the signal is successfully received and synchronized.
Image: The Newentor Weather Station display console highlighting the WWVB signal icon, indicating successful reception of the atomic clock signal for automatic time synchronization.
5. ጥገና
5.1 ጽዳት
Wipe the display console and remote sensors with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the surfaces and electronic components.
5.2 የባትሪ መተካት
When the low battery indicator appears on the display for either the main unit or a remote sensor, replace all batteries in that unit with new ones of the specified type. Ensure correct polarity during installation.
6. መላ መፈለግ
- No Outdoor Reading / Sensor Not Connecting:
- Ensure batteries are correctly installed in both the sensor and main unit.
- Press the 'RESET' button on both the sensor and main unit (if available).
- Bring the sensor closer to the main unit to check for signal interference.
- Change the channel on the remote sensor and then press the 'CH' button on the main unit to rescan.
- ትክክል ያልሆኑ ንባቦች;
- Ensure sensors are not exposed to direct sunlight, heat sources, or excessive moisture.
- Allow sufficient time (up to 30 minutes) for readings to stabilize after initial setup or battery change.
- WWVB Signal Not Received (Q5):
- Place the main unit near a window, away from electronic devices that may cause interference.
- The signal is strongest at night. Allow several nights for successful synchronization.
- የማይሰራ ማሳያ;
- Check and replace batteries in the main unit.
- Ensure the power adapter (if used) is securely connected.
7. ዝርዝሮች
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| የምርት ስም | ኒውኤንተር |
| የኃይል ምንጭ | በባትሪ የተጎላበተ |
| የግንኙነት ቴክኖሎጂ | 433 ሜኸ ፣ 868 ሜኸ |
| የሙቀት ትክክለኛነት | ± 1 ° ሴ |
| የላይኛው የሙቀት ደረጃ | 50 ዲግሪዎች ሴልሲየስ |
| የማሳያ ዓይነት | LCD |
| የገመድ አልባ ማስተላለፊያ ክልል | እስከ 200 ጫማ / 60 ሜትር (ክፍት አየር) |
| የተካተቱ አካላት | Display Console, Sensors, Mounting Hardware, Instruction Manual, Screws, Power Cord (Batteries not included) |
8. ዋስትና እና ድጋፍ
Newentor products are designed for reliability and performance. This product comes with a standard manufacturer's warranty. For specific warranty details, please refer to the documentation included in your product packaging or visit the official Newentor webጣቢያ.
If you encounter any issues or have questions not covered in this manual, please contact Newentor customer support through the contact information provided on our website or your purchase platform. Please have your model number (Q3 or Q5) and purchase date available when contacting support.
