ዴልታኮ ጌሚንግ ጋም-135-ዋ

1. የደህንነት መመሪያዎች

Read this entire instruction manual before installation and assembly. If you have any questions regarding any of the instructions or warnings, please contact your local distributor for assistance.

• Do not exceed the maximum weight capacity of 8 kg (17.6 lbs) or the maximum screen size of 32 inches. Serious injury or property damage may occur.
• This product is designed for installation on a desk. Ensure the desk surface is stable and capable of supporting the combined weight of the monitor arm and the monitor.
• ይህንን ምርት ለታቀደለት ዓላማ ብቻ ይጠቀሙ።
• ትናንሽ ክፍሎችን ከልጆች ያርቁ.
• ከመጠቀምዎ በፊት ሁሉም አካላት ደህንነቱ በተጠበቀ ሁኔታ እንደተጣበቁ ያረጋግጡ።

2. የጥቅል ይዘቶች

Verify that all components listed below are present and undamaged. If any parts are missing or damaged, do not attempt to assemble the product. Contact customer support for replacement parts.

• የክትትል ክንድ ስብስብ
• ዴስክ ክሊamp አካላት
• VESA ሳህን
• የሃርድዌር ኪት (ዊንጮች፣ ማጠቢያዎች፣ የአለን ቁልፎች)
• የኬብል አስተዳደር ክሊፖች

3. የማዋቀር መመሪያዎች

3.1. ዴስክ Clamp መጫን

1. ጠረጴዛውን cl ያያይዙamp base to the main pole of the monitor arm using the provided screws.
2. Position the monitor arm on the edge of your desk.
3. ጠረጴዛውን በጥብቅ ይዝጉ clamp screw until the arm is securely fastened to the desk. Ensure it is stable and does not wobble.

3.2. VESA Plate Attachment to Monitor

1. የሞኒተርዎን ፊት ለስላሳ እና ንጹህ በሆነ ቦታ ላይ በጥንቃቄ ያስቀምጡት።
2. Identify the VESA mounting holes on the back of your monitor (typically 75x75mm or 100x100mm).
3. Attach the VESA plate to the monitor using the appropriate screws from the hardware kit. Do not overtighten.

3.3. Monitor Attachment to Arm

1. Slide the VESA plate with the attached monitor onto the monitor arm's mounting head.
2. Secure the monitor to the arm by tightening any locking screws or clips as indicated in the assembly diagrams.

3.4. የኬብል አስተዳደር

Route your monitor cables (power, video, etc.) through the integrated cable management clips or channels on the arm for a tidy setup.

4. የአሠራር መመሪያዎች

The monitor arm allows for various adjustments to achieve an ergonomic viewልምድ.

• የከፍታ ማስተካከያ; Loosen the height adjustment collar on the main pole, move the arm to the desired height, and then re-tighten the collar.
• የማዘንበል ማስተካከያ፡ Adjust the tilt angle of your monitor by loosening the tilt screw on the VESA plate, setting the desired angle, and re-tightening.
• የማዞሪያ ማስተካከያ፡ The arm can swivel horizontally at various pivot points. Gently rotate the monitor to the left or right.
• ማሽከርከር፡ The VESA plate allows for 360-degree rotation, enabling portrait or landscape orientation.

የውጥረት ማስተካከያ; If the monitor sags or is difficult to move, use the provided Allen key to adjust the tension screw on the arm joints. Turn clockwise to increase tension (for heavier monitors) and counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the monitor holds its position firmly.

5. ጥገና

• ማጽዳት፡ የማሳያውን ክንድ በለስላሳ፣ d ይጥረጉamp ጨርቅ. ገላጭ ማጽጃዎችን ወይም ፈሳሾችን ከመጠቀም ይቆጠቡ።
• ወቅታዊ ፍተሻ፡- ሁሉንም ዊንጮችና ማያያዣዎች በየጊዜው ያረጋግጡና ጥብቅ ሆነው እንዲቆዩ ያድርጉ። አስፈላጊ ከሆነ እንደገና ያጥብቁ።

6. መላ መፈለግ

• ሳግስን ተቆጣጠር ወይም ቦታ አይይዝ፡ The tension in the arm joints may be too low for your monitor's weight. Increase the tension using the appropriate Allen key (refer to "Tension Adjustment" in Section 4).
• ሞኒተሩ ለመንቀሳቀስ አስቸጋሪ ነው; The tension in the arm joints may be too high. Decrease the tension using the appropriate Allen key (refer to "Tension Adjustment" in Section 4).
• Arm is Unstable: ዴስክ cl ያረጋግጡamp is securely tightened to the desk. Check that all assembly screws are properly fastened.

7. ዝርዝሮች

8. ዋስትና እና ድጋፍ

For warranty information or technical support, please refer to the documentation provided with your purchase or contact DELTACO GAMING customer service directly. Keep your proof of purchase for warranty claims.