መግቢያ
This manual provides instructions for the safe operation, setup, maintenance, and troubleshooting of your RYOBI ONE+ 18V Cordless Precision Craft Rotary Tool Kit, model PRT100K1. This tool is designed for light-duty hobby and craft projects, offering cordless convenience and variable speed control for precision tasks.
መሳሪያውን ከመጠቀምዎ በፊት ይህንን መመሪያ በደንብ ያንብቡ እና ለወደፊት ጥቅም ላይ እንዲውል ያስቀምጡት።
አጠቃላይ የደህንነት መረጃ
ማስጠንቀቂያ፡- በዚህ የኃይል መሣሪያ የቀረቡትን ሁሉንም የደህንነት ማስጠንቀቂያዎች፣ መመሪያዎች፣ ምሳሌዎች እና ዝርዝሮች ያንብቡ። ከዚህ በታች የተዘረዘሩትን ሁሉንም መመሪያዎች አለመከተል የኤሌክትሪክ ንዝረት, የእሳት አደጋ እና / ወይም ከባድ ጉዳት ሊያስከትል ይችላል.
- ሁልጊዜ የዓይን መከላከያ ይልበሱ.
- የስራ ቦታን ንፁህ እና በደንብ ያብሩ።
- እንደ ተቀጣጣይ ፈሳሾች፣ ጋዞች ወይም አቧራ ባሉ ፈንጂዎች ውስጥ የኃይል መሳሪያዎችን አይጠቀሙ።
- የኤሌክትሪክ መሳሪያ በሚሰሩበት ጊዜ ልጆችን እና ተመልካቾችን ያርቁ።
- ለመተግበሪያዎ ትክክለኛውን መሳሪያ ይጠቀሙ.
- ማናቸውንም ማስተካከያዎችን ከማድረግዎ, መለዋወጫዎችን ከመቀየርዎ ወይም የኃይል መሳሪያዎችን ከማጠራቀምዎ በፊት የባትሪውን መያዣ ከመሳሪያው ያላቅቁ.
- ስራ ፈት የኤሌክትሪክ መሳሪያዎችን ህጻናት በማይደርሱበት ቦታ ያከማቹ እና የኃይል መሳሪያውን ወይም እነዚህ መመሪያዎችን የማያውቁ ሰዎች የኃይል መሣሪያውን እንዲሠሩ አይፍቀዱ.
የጥቅል ይዘቶች
ከዚህ በታች የተዘረዘሩት ሁሉም እቃዎች በኪትዎ ውስጥ መካተቱን ያረጋግጡ፡
- (1) RYOBI ONE+ 18V Precision Craft Rotary Tool (Model: PRT100K1)
- (15) Assorted Accessory Bits (for engraving, carving, sanding, polishing, cleaning)
- (1) RYOBI ONE+ 18V 2.0Ah Battery
- (1) RYOBI ONE+ 18V Charger
- (1) ቁልፍ
- (1) Operator's Manual (this document)
Image: RYOBI ONE+ 18V Cordless Precision Craft Rotary Tool Kit components.
ማዋቀር
1. ባትሪውን በመሙላት ላይ
- Connect the RYOBI ONE+ 18V Charger to a standard electrical outlet.
- Slide the 18V 2.0Ah Battery onto the charger until it clicks into place.
- ባትሪው ሙሉ በሙሉ እንዲሞላ ይፍቀዱለት። የኃይል መሙያውን ሁኔታ ለማወቅ የኃይል መሙያውን አመላካች መብራቶች ይመልከቱ።
- አንዴ ከሞላ በኋላ ባትሪውን ከኃይል መሙያው ላይ ያስወግዱት።
ማስታወሻ፡- Always use the RYOBI ONE+ 18V Charger provided or a compatible RYOBI ONE+ charger for optimal performance and safety.
2. Installing Accessories (Quick-Change Collet)
The rotary tool features a Quick-Change Collet for fast and easy accessory changes. The collet size is 1/8 inch.
- Ensure the rotary tool is turned off and the battery pack is removed.
- Locate the collet nut at the front of the tool.
- ስፒንድልል እንዳይዞር (ካለ) የሾላ ቁልፍን ተጭነው ይያዙ።
- Unscrew the collet nut counter-clockwise using the provided wrench or by hand until it is loose.
- Insert the desired accessory bit into the collet, ensuring it is seated as deeply as possible without the tip touching the tool housing.
- Tighten the collet nut clockwise by hand, then use the wrench to secure it firmly. Do not overtighten.
- የስፒንድል መቆለፊያ ቁልፍን ይልቀቁ።
ጥንቃቄ፡- Always ensure accessories are securely installed before operation to prevent them from flying out during use.
የአሠራር መመሪያዎች
1. ማብራት / ማጥፋት
- To turn the tool ON, slide the ON/OFF switch to the "ON" position.
- To turn the tool OFF, slide the ON/OFF switch to the "OFF" position.
2. ተለዋዋጭ የፍጥነት መቆጣጠሪያ
The rotary tool features 5 variable speed settings, allowing for maximum control and accuracy across different applications. The RPM range is from 4,400 to 23,000 RPM.
- Use lower speeds for polishing, delicate work, or when working with softer materials.
- Use higher speeds for cutting, grinding, or when working with harder materials.
- Adjust the speed setting using the speed control dial or buttons on the tool.
ጠቃሚ ምክር፡ Always test the speed setting on a scrap piece of material before beginning your project to ensure optimal results and prevent damage.
3. አጠቃላይ የአጠቃቀም ምክሮች
- Apply light pressure. Let the tool and accessory do the work. Excessive pressure can cause the tool to bog down, overheat, or damage the workpiece.
- Keep the tool moving. Do not hold the accessory in one spot for too long, as this can cause gouging or burning.
- Match the accessory to the task. Use appropriate bits for engraving, carving, sanding, polishing, or cleaning.
- Utilize the cordless design for portability, allowing you to work in various locations without being tethered to an outlet.
ጥገና
1. ማጽዳት
- Before cleaning, ensure the tool is off and the battery is removed.
- የመሳሪያውን ውጫዊ ክፍል በንጹህ፣ d ይጥረጉamp ጨርቅ. ኃይለኛ ኬሚካሎችን ወይም ሻካራ ማጽጃዎችን አይጠቀሙ.
- አቧራ እና ፍርስራሾችን ከአየር ማናፈሻ ክፍተቶች ለማጽዳት የተጨመቀ አየር ይጠቀሙ።
- ውጤታማነታቸውን ለመጠበቅ እና ህይወታቸውን ለማራዘም ከእያንዳንዱ ጥቅም በኋላ መለዋወጫዎችን ያፅዱ።
2. ማከማቻ
- Store the tool, battery, charger, and accessories in a dry, secure location, away from direct sunlight and extreme temperatures.
- Utilize the on-board accessory compartment for convenient storage of bits, keeping them organized and easily accessible.
- የባትሪውን ጤና ለመጠበቅ ለረጅም ጊዜ ማከማቻ ከመጠቀምዎ በፊት ባትሪው በከፊል መሙላቱን ያረጋግጡ።
መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| መሳሪያ አይበራም። | ባትሪ አልተሞላም ወይም በአግባቡ አልተጫነም። | ባትሪው ሙሉ በሙሉ መሙላቱን እና ደህንነቱ በተጠበቀ ሁኔታ ወደ መሳሪያው ውስጥ መግባቱን ያረጋግጡ። |
| Accessory bit wobbles or flies out. | Accessory not properly tightened in the collet. | Turn off tool, remove battery, and re-tighten the collet nut firmly with the wrench. |
| Tool loses power or slows down during use. | Battery charge is low; excessive pressure applied. | Recharge the battery. Reduce pressure on the workpiece. |
| መሣሪያ ከመጠን በላይ ይሞቃል። | ለረጅም ጊዜ ጥቅም ላይ የዋለ ከባድ አጠቃቀም፤ የአየር ዝውውርን መዝጋት። | Allow tool to cool down. Clear any debris from ventilation openings. Reduce workload. |
If you encounter issues not covered here, please contact RYOBI customer support.
ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| የሞዴል ቁጥር | PRT100K1 |
| ጥራዝtage | 18 ቮልት |
| የኃይል ምንጭ | በባትሪ የተጎላበተ (ገመድ አልባ) |
| የባትሪ ዓይነት | RYOBI ONE+ 18V Lithium Ion |
| በደቂቃ የሚደረጉ ሽክርክሪቶች (RPM) | 4,400 - 23,000 RPM (5 Variable Speeds) |
| የኮሌት መጠን | 1/8 ኢንች |
| የእቃው ክብደት | 3.34 ፓውንድ (1.52 ኪሎግራም) |
| የጥቅል ልኬቶች | 8.75 x 8 x 4.25 ኢንች |
| ዩፒሲ | 033287205288 |
ዋስትና እና ድጋፍ
This RYOBI ONE+ 18V Cordless Precision Craft Rotary Tool Kit (PRT100K1) is backed by a የRYOBI የ3-ዓመት አምራች ዋስትና.
For warranty claims, technical assistance, or to purchase replacement parts and accessories, please contact RYOBI customer support. Refer to the contact information provided on the product packaging or the official RYOBI webጣቢያ.
Please have your model number (PRT100K1) and proof of purchase available when contacting support.