1. በላይview
The waveshare FT232RNL USB to RS232/485/422/TTL Interface Converter is an industrial-grade isolated converter designed for reliable and stable communication across various serial interfaces. It leverages an original FT232RNL chip for superior performance and compatibility. This device is engineered with multiple protection features to ensure safe and durable operation in diverse environments.
Figure 1: waveshare FT232RNL USB to RS232/485/422/TTL Interface Converter
2. ባህሪያት
- Original FT232RNL Chip: Ensures fast, stable, and reliable communication with enhanced compatibility.
- Multi-Interface Conversion: Supports USB to RS232, USB to RS485, USB to RS422, and USB to TTL.
- Unibody Power Supply Isolation: Provides stable isolated voltage without requiring external power for the isolated terminal.
- Unibody Digital Isolation: Allows signal isolation, offering high reliability, strong anti-interference, and low power consumption.
- TVS (አላፊ ጥራዝtage Suppressor): Effectively suppresses surge voltagሠ እና ጊዜያዊ ስፒል ጥራዝtage, providing lightningproof and ESD protection.
- Self-Recovery Fuse & Protection Diodes: Ensures stable current/voltage outputs, offering over-current/over-voltage proof and improved shock resistance.
- Automatic Transceiver Circuit: Fully automatic, no-delay transceiver circuit for fast and stable communication without interference.
- TTL Serial 3.3V/5V Voltage Translator: Configurable TTL level via switch.
- የ LED አመልካቾች Three LEDs indicate power (PWR) and transceiver status (TXD, RXD).
- High-Quality Connectors: Durable USB-B and RS232 connectors for smooth plug/pull.
- Industrial-Grade Metal Case: Supports wall-mount and rail-mount installations, providing a solid and aesthetically pleasing ንድፍ.
Figure 2: Internal Design and Protection Features
3. የጥቅል ይዘት
የምርት እሽግ በተለምዶ የሚከተሉትን ነገሮች ያካትታል:
- waveshare FT232RNL USB to RS232/485/422/TTL Interface Converter
- USB-A ወደ USB-B ገመድ
- ስከርድድራይቨር
- የመጫኛ ቅንፎች (ቀድሞ የተያያዘ ወይም የተለየ)
ምስል 3፡ የጥቅል ይዘቶች
4. ማዋቀር
To set up your waveshare FT232RNL converter, follow these general steps:
- Connect to Host: Use the provided USB-A to USB-B cable to connect the converter's USB-B port to a USB port on your computer (PC, Mac, Linux, Android device).
- የአሽከርካሪ ጭነት; For most modern operating systems (Windows, Linux, Mac, Android), the necessary drivers for the FT232RNL chip should install automatically upon connection. If not, drivers can be obtained from the FTDI website or waveshare's official support page.
- Select TTL Level (if applicable): If using the TTL interface, adjust the 3.3V/5V voltage translator switch on the converter to match the voltage level of your target device.
- ተከታታይ መሣሪያን ያገናኙ፦ Connect your RS232, RS485, RS422, or TTL serial device to the corresponding screw terminals or DB9 connector on the converter. Ensure correct pin assignments (refer to Section 6: Interface Introduction).
- ግንኙነት አረጋግጥ፡ The PWR LED on the converter should illuminate when connected to a powered USB port. The TXD and RXD LEDs will flash during data transmission.
Video 1: Demonstrates the connection and various interface conversions of the waveshare USB to RS232/485/422/TTL converter.
5. አሠራር
Once the converter is set up and connected, it operates as a transparent bridge between your USB host and the connected serial device. The onboard automatic transceiver circuit manages data flow without manual intervention.
የ LED አመልካቾች
- PWR (ቀይ): Indicates power. Lights up when the USB connection is established and voltagሠ ተገኝቷል.
- TXD (Green): Transmit Data Indicator. Lights up when the USB port sends data.
- RXD (Green): Receive Data Indicator. Lights up when the device ports send data back.
To communicate with your serial device, use appropriate serial communication software on your computer. Configure the software with the correct COM port (assigned by your operating system), baud rate, data bits, parity, and stop bits to match your serial device's settings.
6. በይነገጽ መግቢያ
The converter provides multiple interfaces for versatile connectivity:
ምስል 4 - ተጠናቀቀview of Converter Interfaces
RS232 Pinout (DB9 Male):
| ፒን | መግለጫ |
|---|---|
| 2 | Receiving data (RXD) |
| 3 | Sending data (TXD) |
| 5 | መሬት GND |
| 1፣ 4፣ 6፣ 7፣ 8፣ 9፣XNUMX | N/C (Not Connected) |
RS485/RS422 Pinout (Screw Terminal):
| Screw Terminal (PIN) | መግለጫ |
|---|---|
| PE | 485/422 signal ground |
| TA | RS422 send differential signal positive / RS485 differential signal positive A+ |
| TB | RS422 send differential signal negative / RS485 differential signal negative B- |
| RA | RS422 receive differential signal positive |
| RB | RS422 receive differential signal negative |
TTL (UART) Pinout (Screw Terminal):
| Screw Terminal (PIN) | መግለጫ |
|---|---|
| TXD | TTL transmit data pin, connect to MCU.RXD |
| RXD | TTL receive data pin, connect to MCU.TXD |
| ጂኤንዲ | ከጂኤንዲ ጋር ይገናኙ |
| ቪሲሲ | 5V / 3.3V power supply output, configurable via 5V/3.3V level switch |
Figure 5: Detailed Pinouts
7. ዝርዝሮች
| ምድብ | ዝርዝር መግለጫ |
|---|---|
| የምርት ዓይነት | Industrial grade digital isolated converter |
| ኦፕሬቲንግ ቁtage | 5V (USB) / 3.3V / 5V (TTL) |
| የዩኤስቢ አያያዥ | ዩኤስቢ-ቢ |
| የዩኤስቢ ጥበቃ | 200mA የራስ-ማገገሚያ ፊውዝ ፣ ገለልተኛ ውፅዓት |
| RS232 አያያዥ | DB9 ወንድ |
| RS232 ጥበቃ | TVS diode, surge protection & ESD protection |
| RS232 Transmission Mode | ነጥብ-ወደ-ነጥብ |
| RS232 Baud ተመን | 300bps ~ 921600bps |
| RS485/422 አያያዥ | ስከር ተርሚናል |
| RS485/422 Direction Control | Hardware automatic control |
| RS485/422 Protection | 600W lightningproof and surge-suppress, 15KV ESD protection (reserved two 120R balancing resistors, enabled/disabled via jumper) |
| RS485/422 Transmission Mode | Point-to-multipoints (485 mode: up to 32 nodes, repeaters recommended for 16+ nodes; 422 mode: up to 256 nodes, repeaters recommended for 16+ nodes) |
| RS485/422 Baud Rate | 300bps ~ 2Mbps |
| TTL (UART) Connector | ስከር ተርሚናል |
| TTL (UART) Pins | TXD, RXD, GND, 5V/3.3V |
| TTL (UART) Protection | Clamp መከላከያ ዳዮድ, ከመጠን በላይ ጥራዝtagኢ/አሉታዊ-ቮልtagሠ ማስረጃ, ድንጋጤ የመቋቋም |
| TTL (UART) Transmission Mode | ነጥብ-ወደ-ነጥብ |
| TTL (UART) Baud Rate | 300bps ~ 2Mbps |
| የአሠራር ሙቀት | -40 ° ሴ ~ 85 ° ሴ |
| የሚሰራ እርጥበት | 5% RH ~ 95% አርኤች |
| የሚደገፉ ስርዓተ ክወናዎች | ማክ፣ ሊኑክስ፣ አንድሮይድ፣ ዊንዶውስ 11/10/8.1/8/7 |
| የጥቅል ልኬቶች | 6.14 x 4.33 x 1.26 ኢንች |
| የእቃው ክብደት | 1.76 አውንስ |
| አምራች | Waveshare |
| የመጀመሪያ ቀን ይገኛል። | የካቲት 6 ቀን 2023 ዓ.ም |
Figure 6: Outline Dimensions (Unit: mm)
8. ጥገና
To ensure the longevity and optimal performance of your waveshare FT232RNL converter, follow these maintenance guidelines:
- ማጽዳት፡ Use a soft, dry cloth to clean the exterior of the device. Avoid using liquid cleaners or solvents, which may damage the casing ወይም የውስጥ አካላት.
- አካባቢ፡ Operate and store the converter in a clean, dry environment, away from excessive dust, moisture, and extreme temperatures. Refer to the operating temperature and humidity specifications.
- አያያዝ፡ Handle the device with care. Avoid dropping it or subjecting it to strong impacts, which could damage the internal circuitry.
- ግንኙነቶች፡ Ensure all cable connections are secure and free from strain. Periodically check screw terminals for tightness.
9. መላ መፈለግ
If you encounter issues with your waveshare FT232RNL converter, consider the following troubleshooting steps:
- No Power (PWR LED Off):
- Ensure the USB cable is securely connected to both the converter and the host computer.
- በኮምፒተርዎ ላይ የተለየ የዩኤስቢ ወደብ ይሞክሩ።
- Verify that your computer's USB port is providing power.
- No Data Transmission (TXD/RXD LEDs not flashing):
- Check all serial connections (RS232, RS485, RS422, TTL) for correct wiring and secure connections.
- Verify that the serial communication software on your computer is correctly configured (COM port, baud rate, data bits, parity, stop bits).
- Ensure the TTL level switch is set correctly for your TTL device (3.3V or 5V).
- Confirm that the connected serial device is powered on and functioning correctly.
- የአሽከርካሪ ጉዳዮች፡-
- If the device is not recognized by your operating system, try reinstalling the FTDI drivers. These can typically be found on the FTDI webጣቢያ.
- Check your device manager (Windows) or equivalent system information (Linux/Mac) to see if the device is listed without errors.
- ጣልቃ ገብነት፡-
- While the device has strong anti-interference capabilities, ensure it is not placed near strong electromagnetic interference sources.
10. ዋስትና እና ድጋፍ
For warranty information, technical support, or further assistance with your waveshare FT232RNL USB to RS232/485/422/TTL Interface Converter, please contact waveshare directly through their official webጣቢያው ወይም ምርቱን የገዙበት ቸርቻሪ።
An official user guide in PDF format is also available for download: የተጠቃሚ መመሪያ (ፒዲኤፍ)
