BRASQ Metal Storage Shelf Instruction Manual

1. መግቢያ

Thank you for choosing the BRASQ Metal Storage Shelf. This manual provides essential information for the safe and efficient assembly, operation, and maintenance of your new storage unit. Please read these instructions carefully before assembly and retain them for future reference.

This robust metal shelving unit is designed for various storage needs in environments such as workshops, garages, pantries, warehouses, and archives. It features five adjustable shelves, each capable of holding up to 175 kg, with a total maximum capacity of 875 kg.

2. የደህንነት መመሪያዎች

• ሁሉንም መመሪያዎች ያንብቡ: ከመቀጠልዎ በፊት ሁሉንም የዝግጅት ደረጃዎች እና የደህንነት ማስጠንቀቂያዎች መረዳትዎን ያረጋግጡ።
• የመከላከያ መሳሪያዎችን ይልበሱ; Gloves are recommended during assembly to prevent cuts from sharp edges.
• Assembly location: Assemble the unit on a flat, stable surface.
• Heavy components: Some parts may be heavy. Consider assembling with assistance.
• ነጥቦችን መቆንጠጥ; Be aware of potential pinch points during assembly, especially when connecting beams and uprights.
• የክብደት ገደቦች፡ Do not exceed the maximum weight capacity of 175 kg per shelf or 875 kg total for the entire unit. Distribute weight evenly.
• መረጋጋት፡ For maximum stability and safety, especially in areas with children or seismic activity, it is highly recommended to anchor the shelving unit to a wall using appropriate hardware (not included).
• ልጆች እና የቤት እንስሳት; Keep children and pets away from the assembly area. Do not allow children to climb on the shelves.
• ጥገና፡- Regularly inspect the unit for loose connections or damage. Tighten fasteners as needed.

3. የጥቅል ይዘቶች

ስብሰባ ከመጀመርዎ በፊት ሁሉም ክፍሎች መኖራቸውን እና ምንም ጉዳት እንዳልደረሰባቸው ያረጋግጡ። ማንኛውም ክፍል ከጎደለ ወይም ከተበላሸ፣ ስብሰባውን አይቀጥሉ እና የደንበኞችን ድጋፍ ያነጋግሩ።

• Upright posts (vertical supports)
• Horizontal beams (long and short)
• Shelf panels (5 pieces)
• Plastic feet/caps for uprights
• Note: Wall anchoring hardware is not included and must be purchased separately based on your wall type.

Tools Recommended (not included):

• Rubber mallet (for securing beams)
• Spirit level (for ensuring level assembly)
• የመለኪያ ቴፕ
• መከላከያ ጓንቶች

4. ማዋቀር እና መሰብሰብ

Follow these steps carefully to assemble your BRASQ metal storage shelf. Assembly is typically tool-free for the main structure, requiring only a rubber mallet to secure connections.

Step 1: Prepare the Upright Posts

Attach the plastic feet/caps to the bottom ends of the upright posts. These protect your floor and provide stability.

ደረጃ 2፡ የመሠረት ፍሬሙን ያሰባስቡ

Connect two upright posts using two long horizontal beams and two short horizontal beams to form a rectangular base. Ensure the beams are inserted securely into the slots on the uprights. Use a rubber mallet to gently tap the connections until they are fully seated and firm. Repeat this for the top frame.

Step 3: Connect the Frames

Stand the two assembled frames upright. Connect them using additional long and short horizontal beams at the desired shelf heights. Start with the bottom and top shelves to create a stable structure, then add the intermediate shelves. Ensure all connections are fully engaged and secure with the rubber mallet.

Step 4: Insert Shelf Panels

Once the frame is fully assembled and stable, place the shelf panels onto the horizontal beams. Ensure they sit flush and are evenly supported. The shelf height can be adjusted by repositioning the horizontal beams in the upright slots before placing the panels.

Step 5: Check Stability and Anchor (Recommended)

After assembly, gently shake the unit to check for stability. Use a spirit level to ensure it is level. For enhanced safety, especially with heavy loads or in active environments, anchor the shelving unit to a wall. Mark the desired wall mounting points, drill pilot holes, and secure the unit using appropriate wall anchors and screws (not supplied).

This image illustrates the overall dimensions of the BRASQ metal storage shelf. It stands 180 cm tall, is 90 cm wide, and 40 cm deep, featuring five adjustable shelves.

5. የአሠራር መመሪያዎች (አጠቃቀም)

• በመጫን ላይ፡ Place heavier items on lower shelves to improve stability. Distribute weight evenly across each shelf.
• የክብደት አቅም; Do not exceed 175 kg per shelf or a total of 875 kg for the entire unit. Overloading can cause structural failure and injury.
• የመደርደሪያ ማስተካከያ; To adjust shelf height, unload the shelf, gently tap the horizontal beams upwards with a rubber mallet to disengage them from the upright slots, reposition them to the desired height, and then re-secure them by tapping downwards. Ensure all four beam ends are fully seated before reloading.
• ማጽዳት፡ Ensure adequate clearance around the shelf for safe loading and unloading of items.

6. ጥገና

• ማጽዳት፡ Wipe down metal surfaces with a damp ጨርቅ እና መለስተኛ ሳሙና። ጨርቁን ሊያበላሹ የሚችሉ ሻካራ ማጽጃዎችን ወይም መሟሟቶችን ያስወግዱ።
• ምርመራ፡- Periodically check all connections to ensure they remain tight and secure. Re-tap with a rubber mallet if any beams feel loose.
• ጉዳት፡ If any part of the shelving unit becomes bent, cracked, or otherwise damaged, discontinue use immediately and replace the affected components or the entire unit.

7. መላ መፈለግ

• መደርደሪያው አሰልቺ ነው;
  • Ensure all horizontal beams are fully seated into the upright slots. Use a rubber mallet to tap them firmly into place.
  • Verify the unit is on a level surface. Adjust feet or use shims if necessary.
  • Consider anchoring the unit to a wall for added stability.
• Difficulty inserting beams:
  • Ensure the beam ends are correctly aligned with the slots.
  • Apply gentle, even pressure. A rubber mallet can help seat the connections.
• Shelf panels do not fit:
  • Double-check that the frame dimensions match the shelf panel size.
  • Ensure the frame is square and level.

8. ዝርዝሮች

9. ዋስትና እና ድጋፍ

የዋስትና መረጃ ወይም የቴክኒክ ድጋፍ ለማግኘት፣ እባክዎን በግዢው ቦታ ላይ የቀረቡትን ሰነዶች ይመልከቱ ወይም ቸርቻሪዎን ያነጋግሩ። ለማንኛውም የዋስትና ጥያቄ የግዢ ማረጋገጫዎን ያስቀምጡ።

If you have questions regarding the assembly or operation of your BRASQ Metal Storage Shelf, please contact the manufacturer or your local distributor for assistance.