FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank User Manual

1. መግቢያ

Thank you for choosing the FLYLINKTECH BD10 6000A 12V Car Jump Starter and Power Bank. This device is designed to provide emergency jump-starting for vehicles and serve as a portable power bank for various electronic devices. Please read this manual thoroughly before use to ensure safe and optimal operation.

Image 1.1: The FLYLINKTECH BD10 Jump Starter unit with its smart battery clamps.

2. የደህንነት መረጃ

Always observe the following safety precautions to prevent injury or damage to the device or vehicle:

• የቀዘቀዘ ባትሪ ለመዝለል አይሞክሩ።
• ትክክለኛውን የፖላሪቲ ግንኙነት ያረጋግጡ (ቀይ clamp ወደ አዎንታዊ, ጥቁር clamp to negative). Reverse polarity can cause damage.
• Do not allow the smart clamps to touch each other when connected to the jump starter.
• መሣሪያውን ከልጆች ያርቁ.
• Do not expose the device to extreme temperatures (above 60°C / 140°F or below -20°C / -4°F) or direct sunlight for extended periods.
• መሣሪያውን አይሰብስቡ ወይም አይቀይሩት።
• Use only the provided smart clamps and charging cables.
• If the device becomes excessively hot during use, disconnect it immediately.

Image 2.1: The jump starter incorporates multiple safety features such as spark-proof, reverse polarity, overvoltage, short circuit, overload, and high-temperature protection.

3. የጥቅል ይዘቶች

ሁሉም እቃዎች በጥቅሉ ውስጥ መኖራቸውን ያረጋግጡ፡-

• FLYLINKTECH BD10 Jump Starter Unit
• ስማርት ባትሪ ክሊamps
• USB-C ወደ USB-C ገመድ
• USB-A ወደ USB-C ገመድ
• 12 ቮ ዲሲ የመኪና ቻርጀር አስማሚ
• የተጠቃሚ መመሪያ
• የማከማቻ መያዣ

Image 3.1: The complete package includes the jump starter, smart clamps, various cables, user manual, and a protective storage case.

4. ማዋቀር እና መሙላት

4.1 የመጀመሪያ ክፍያ

Before first use, fully charge the jump starter. The device features a 26800mAh battery capacity.

• Connect the provided USB-C cable to the jump starter's USB-C input port.
• Connect the other end of the cable to a compatible USB wall charger (not included). For fastest charging, use a PD 45W charger.
• The LED screen will display the charging status and battery percentage.

4.2 Charging Times

Note: A 45W wall charger is not included in the package.

Image 4.1: The device supports PD 45W fast charging, significantly reducing recharge time when using a compatible charger.

5. የአሠራር መመሪያዎች

5.1 ተሽከርካሪን በመጀመር ላይ ዝለል

The FLYLINKTECH BD10 is capable of jump-starting all gas engines and diesel engines up to 12.0L.

1. Ensure Sufficient Charge: Check the jump starter's LED screen to ensure it has at least 50% charge.
2. Smart Cl ያገናኙamps: የስማርት cl ሰማያዊ መሰኪያ ያስገቡamps into the jump starter's 12V output port. Ensure a firm connection.
3. ከመኪና ባትሪ ጋር ይገናኙ፡
   • ያያይዙት። ቀይ (+) clamp ወደ ተሽከርካሪው ፖዘቲቭ የባትሪ ተርሚናል።
   • ያያይዙት። ጥቁር (-) clamp to the vehicle's negative battery terminal.
4. አመልካች አረጋግጥ፡ ብልህ clamp indicator light should turn solid green, indicating a correct connection. If it flashes or shows red, check connections and battery status.
5. Press BOOST (if needed): If the vehicle battery is extremely low or completely dead, press the 'BOOST' button on the jump starter. Wait for the indicator light on the smart clamps to turn solid green.
6. ተሽከርካሪ ጀምር፡ Attempt to start your vehicle. If it doesn't start on the first try, wait 30 seconds before trying again. Do not attempt more than 3 consecutive starts.
7. Cl አስወግድamps: ተሽከርካሪው አንዴ ከጀመረ በኋላ፣ ስማርት ክላሩን ወዲያውኑ ያስወግዱትampከመኪናው ባትሪ ላይ s፣ ከዚያም ከመዝለያ ማስጀመሪያው ያላቅቋቸው።

Image 5.1: The jump starter connected to a car battery, ready for operation. It supports 6000A peak current, 12V output, and is suitable for a wide range of engines.

Image 5.2: Visual guide illustrating the four steps to jump-start a vehicle: connect the plug, attach clamps, press boost, and start the engine.

5.2 የኃይል ባንክ ተግባር

The BD10 can charge multiple electronic devices via its USB-A and USB-C ports.

• USB1 ውፅዓት Up to 18W (max)
• USB2 ውፅዓት Up to 18W (max)
• የዩኤስቢ-ሲ ውፅዓት፡- እስከ 45 ዋት (PD)

Connect your device using the appropriate USB cable to the desired output port. The LED screen will show 'OUT' and the wattage being drawn.

Image 5.3: The jump starter functioning as a power bank, simultaneously charging a smartphone and a tablet via its USB ports.

5.3 LED የባትሪ ብርሃን

The built-in LED flashlight offers three modes: constant light, SOS signal, and strobe light.

• Press and hold the flashlight button to turn on the constant light.
• Press the button again to cycle through SOS and strobe modes.
• ለማጥፋት እንደገና ተጭነው ይያዙ።

Image 5.4: The integrated LED flashlight provides illumination, an SOS signal, and a strobe function for emergency situations.

5.4 Informative LED Screen

The 6.0-inch LED screen provides real-time information about the device's status:

• የባትሪ ደረጃ፡ የቀረውን የባትሪ መቶኛ ያሳያልtage.
• IN/OUT Indicator: Shows whether the device is charging (IN) or discharging (OUT).
• ዋትtagሠ ማሳያ፡ Indicates the power (W) being drawn or supplied.
• የስህተት ማስጠንቀቂያዎች፡- Displays specific error codes or symbols if an issue occurs.

Image 5.5: The 6.0-inch LED screen provides clear information on battery percentage, input/output status, and power consumption.

6. ጥገና

• በመደበኛነት መሙላት; To prolong battery life, recharge the jump starter every 3-6 months, even if not in use.
• ማከማቻ፡ Store the device in its protective case in a cool, dry place, away from direct sunlight and moisture.
• ማጽዳት፡ መሳሪያውን ለስላሳ እና ደረቅ ጨርቅ ይጥረጉ. ኃይለኛ ኬሚካሎችን ወይም ሻካራ ቁሳቁሶችን አይጠቀሙ.
• Clamp እንክብካቤ፡ ብልጥ cl ያረጋግጡamps are clean and free of corrosion before and after each use.

7. መላ መፈለግ

The device features multiple alarm situations indicated by audible signals and screen displays:

• ዝቅተኛ ጥራዝtagሠ ጥበቃ፡ Audible signal "3". Recharge the device.
• ውጫዊ ጥራዝtage Exceeds Vehicle Voltage: Audible signal "4". Check vehicle battery voltage.
• የአጭር ዙር ጥበቃ፡- Audible signal "5". Check clamp connections for short circuits.
• Safety Mode Activated: Audible signal "6". Device has entered safety mode due to an issue.
• ወቅታዊ ጥበቃ፡- Audible signal "7". Reduce load or check connections.
• ከፍተኛ/ዝቅተኛ የሙቀት መጠን ማንቂያ; Audible signal "8". Allow device to return to operating temperature range (-20°C to 60°C).
• Reverse Connection: Audible signal "9". Correct the clamp ዋልታ

ምስል 7.1፡ አልቋልview of the device's multi-alarm system, indicating various protection states with unique audible signals.

እነዚህን እርምጃዎች ከተከተሉ በኋላ ችግሮች ከቀጠሉ እባክዎ የደንበኛ ድጋፍን ያግኙ።

8. ዝርዝሮች

Image 8.1: The device is designed to operate reliably in extreme climates, from -20°C (-4°F) to 60°C (140°F).

9. ዋስትና እና ድጋፍ

FLYLINKTECH is committed to providing high-quality products. For any questions, technical assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official FLYLINKTECH webጣቢያ. እባክዎ ለዋስትና ዓላማዎች የግዢ ማረጋገጫዎን ያቆዩ።