1. መግቢያ
Thank you for choosing the UTRAI Jstar 5 Car Battery Jump Starter with Air Compressor. This versatile device is designed to provide reliable jump-starting for vehicles, inflate tires, and serve as a portable power bank and emergency light. Please read this manual thoroughly before use to ensure safe and optimal operation.
2. የደህንነት መረጃ
- ከባትሪዎች ጋር ሲሰሩ ሁል ጊዜ የአይን መከላከያ ይልበሱ ፡፡
- በሚሠራበት ጊዜ በቂ የአየር ዝውውርን ያረጋግጡ.
- Do not smoke or allow sparks or flames near the battery or jump starter.
- መሣሪያውን ከልጆች ያርቁ.
- መዝለያውን ያገናኙ clamps correctly: Red to positive (+), Black to negative (-). Incorrect connection can cause damage.
- የቀዘቀዘ ባትሪ ለመዝለል አይሞክሩ።
- Avoid prolonged use of the air compressor to prevent overheating. Allow it to cool down between uses.
- መሳሪያውን ለዝናብ ወይም ለከፍተኛ ሙቀት አያጋልጡት።
3. የጥቅል ይዘቶች
ሁሉም እቃዎች በጥቅልዎ ውስጥ መኖራቸውን ያረጋግጡ፡-
- UTRAI Jstar 5 Jump Starter with Air Compressor
- ስማርት ጃምፐር ሲ.ኤልamps
- የዩኤስቢ-ሲ ኃይል መሙያ ገመድ
- DC Car Charger Adapter
- Various Inflation Nozzles
- የተጠቃሚ መመሪያ
- EVA Protective Carrying Case

4. የምርት ባህሪዎች
- ኃይለኛ የዝላይ ጀማሪ፡ 3500A peak current for 12V vehicles, capable of starting up to 8.0L gas and 8.0L diesel engines.
- ከፍተኛ አቅም ያለው ባትሪ; ለብዙ ዝላይ ጅምር እና ለረጅም ጊዜ የኃይል ባንክ አጠቃቀም 27000mAh ውስጣዊ ባትሪ።
- የተቀናጀ የአየር መጭመቂያ; 150 PSI maximum pressure with an inflation rate of 45 L/Min, suitable for various tires and inflatables.
- ባለብዙ ተግባር መሣሪያ; Combines jump starter, air compressor, portable power bank, and emergency LED light in one compact unit.
- 3 የ LED ብርሃን ሁነታዎች; Features Normal, Flashing, and SOS modes for illumination and emergency signaling.
- Large LED Digital Screen: Provides clear display of battery status, tire pressure, and operational modes.
- ሁለገብ የኃይል መሙያ ወደቦች; Includes QC3.0 USB Output (5V-2.4A), Type-C Input (5V-3A, 9V-2A), and EC5 Output.



5. ማዋቀር
5.1 የመጀመሪያ ደረጃ መሙላት
Before first use, fully charge the UTRAI Jstar 5. Connect the USB-C charging cable to the device's Type-C input port and a suitable USB power adapter (not included). The LED screen will indicate the charging status. A full charge is recommended for optimal performance.
5.2 ማሳያውን መረዳት
The large LED digital screen displays important information:
- የባትሪ ደረጃ፡ Indicates the remaining charge of the internal battery.
- የግፊት ክፍሎች፡- Displays PSI, BAR, or KPA for the air compressor.
- Output/Input Status: Shows when USB or DC outputs are active, or Type-C input is charging.

6. የአሠራር መመሪያዎች
6.1 ተሽከርካሪን በመጀመር ላይ ዝለል
- የመዝለያ ጀማሪው በቂ ኃይል መሙላቱን ያረጋግጡ።
- Insert the smart jumper cable into the EC5 output port on the jump starter.
- ቀዩን ያገናኙ (+) clamp ወደ ተሽከርካሪው ባትሪ አወንታዊ ተርሚናል.
- ጥቁሩን ያገናኙ (-) clamp ወደ ተሽከርካሪው ባትሪ አሉታዊ ተርሚናል.
- Once connected, the smart clamps will indicate readiness (e.g., a green light).
- የመኪናዎን ሞተር ይጀምሩ።
- ሞተሩ ከጀመረ በኋላ, ወዲያውኑ ስማርት cl ን ያስወግዱamps from the car battery, then disconnect the jumper cable from the jump starter.
6.2 Using the Air Compressor (Tire Inflator)
- Locate the air hose stored on the back of the jump starter.
- Screw the air hose connector onto the valve stem of the tire or inflatable item.
- Turn on the jump starter. The screen will display the current pressure.
- Press the 'M' button to cycle through different inflation modes (e.g., car, motorcycle, bicycle, ball) and select the appropriate one.
- Use the '+' and '-' buttons to set your desired target pressure.
- Press the 'OK' button to begin inflation. The compressor will automatically stop once the preset pressure is reached.
- Disconnect the air hose and store it back in the device.

6.3 እንደ ተንቀሳቃሽ የኃይል ባንክ መጠቀም
The UTRAI Jstar 5 can charge various electronic devices:
- Connect your device's USB charging cable to the USB Output port (QC3.0, 5V-2.4A) on the jump starter.
- For devices requiring a Type-C connection, use the Type-C input port for charging the jump starter itself, or if the device supports Type-C output from the jump starter (check device compatibility).
- The DC Output (12V-16V-10A) can power 12V accessories using the appropriate adapter.

6.4 የ LED የእጅ ባትሪ መጠቀም
The integrated LED light provides illumination and emergency signaling:
- Press the dedicated light button (often marked with a lightbulb icon) to turn on the light in Normal mode.
- Press the button again to cycle to Flashing mode.
- Press a third time for SOS mode.
- መብራቱን ለማጥፋት ለአራተኛ ጊዜ ይጫኑ።

7. ጥገና
- ማጽዳት፡ መሳሪያውን ለስላሳ እና ደረቅ ጨርቅ ይጥረጉ. ኃይለኛ ኬሚካሎችን ወይም ሻካራ ማጽጃዎችን አይጠቀሙ.
- ማከማቻ፡ Store the UTRAI Jstar 5 in its protective carrying case in a cool, dry place, away from direct sunlight and moisture.
- በመሙላት ላይ፡ If the device is not used regularly, recharge it every 3-6 months to maintain battery health and prolong its lifespan.
8. መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| መሣሪያ አይበራም። | ዝቅተኛ የባትሪ ክፍያ | መሣሪያውን ሙሉ በሙሉ ይሙሉት። |
| ተሽከርካሪ አይጀምርም። | ትክክል ያልሆነ clamp connection; Severely discharged battery; Vehicle issue | Cl ን ያረጋግጡamps are connected correctly (Red to +, Black to -). Check if the smart clamps indicate readiness. If battery is extremely low, allow a few minutes for the jump starter to provide some charge before attempting to start. Consult a mechanic if the vehicle still doesn't start. |
| የአየር ኮምፕረሰር አይነፋም | Hose not securely connected; Preset pressure is lower than current pressure; Overheating | Ensure the air hose is tightly screwed onto the valve. Set the target pressure higher than the current pressure. If the device is hot, allow it to cool down before resuming use. |
9. ዝርዝሮች
| ባህሪ | ዝርዝር መግለጫ |
|---|---|
| ከፍተኛ የአሁኑ | 3500 Amps |
| የባትሪ አቅም | 27000 ሚአሰ |
| የአየር መጭመቂያ ግፊት | 150 PSI (45 L/Min) |
| ጀምር ጥራዝtage | 12 ቮልት |
| የሞተር ተኳሃኝነት | እስከ 8.0L ጋዝ / 8.0 ሊ ዲሴል |
| የዩኤስቢ ውፅዓት | QC3.0, 5V-2.4A |
| ዓይነት-C ግቤት | 5V-3A፣ 9V-2A |
| የዲሲ ውፅዓት | 12V-16V-10A |
| የምርት ልኬቶች | 8.5 x 4.5 x 3 ኢንች |
| የእቃው ክብደት | 2 ፓውንድ |
10. ዋስትና እና ድጋፍ
For warranty information, technical support, or any inquiries regarding your UTRAI Jstar 5, please refer to the warranty card included in your package or visit the official UTRAI webጣቢያ. የደንበኛ አገልግሎት አድራሻ ዝርዝሮች በተለምዶ በአምራቹ ላይ ይሰጣሉ webጣቢያ ወይም በምርቱ ሰነድ ውስጥ.





