ENDORFY Ventum 200 ARGB ATX Computer Case User Manual

1. መግቢያ

Thank you for choosing the ENDORFY Ventum 200 ARGB ATX Computer Case. This manual provides essential information for the proper installation, operation, and maintenance of your new computer case. Please read this manual thoroughly before beginning the assembly process to ensure optimal performance and longevity of your system.

ምስል 1.1፡ The ENDORFY Ventum 200 ARGB ATX Computer Case, showcasing its sleek black design with a tempered glass side panel and illuminated ARGB fans visible through the mesh front.

2. የደህንነት መረጃ

Always observe the following safety precautions to prevent injury and damage to your components:

• Disconnect the power supply from the wall outlet before installing or removing any components.
• ኤሌክትሮስታቲክ ፈሳሽ (ESD) በስሱ የኤሌክትሮኒክስ ክፍሎች ላይ ጉዳት እንዳይደርስ ለመከላከል አንቲስታቲክ የእጅ አንጓ ማሰሪያ ያድርጉ።
• Handle components carefully. Avoid touching circuit boards directly.
• Ensure all cables are properly routed and secured to prevent interference with fans or other moving parts.
• Do not operate the computer case with the side panel removed unless performing maintenance or installation.

3. የጥቅል ይዘቶች

ሁሉም የሚከተሉት ንጥሎች በጥቅልዎ ውስጥ መካተታቸውን ያረጋግጡ፡-

• ENDORFY Ventum 200 ARGB ATX Computer Case
• Pre-installed Stratus 120 PWM ARGB Fans (x4)
• የመለዋወጫ ሣጥን (ዊንጮች፣ የኬብል ማያያዣዎች፣ ማቆሚያዎች፣ የተጠቃሚ መመሪያ)
• Removable Dust Filters (top, front, bottom)

ምስል 3.1፡ አንድ ፈነዳ view of the ENDORFY Ventum 200 ARGB case, illustrating its various components including the chassis, tempered glass side panel, mesh front panel, top and bottom dust filters, and individual fans.

4. ማዋቀር እና መጫን

Follow these steps for proper assembly of your computer system within the Ventum 200 ARGB case.

4.1. የጎን ፓነሎችን ማስወገድ

To access the interior, unscrew the four thumb screws securing the tempered glass side panel. Carefully remove the panel and set it aside on a soft, flat surface to prevent scratches.

ምስል 4.1፡ ጎን view of the ENDORFY Ventum 200 ARGB case, highlighting the tempered glass side panel which provides a clear view of internal components and is secured by four thumb screws.

4.2. Motherboard መጫን

1. የ I/O ጋሻውን ከሳጥኑ ውስጠኛ ክፍል ወደ ማዘርቦርድ ትሪ መክፈቻ ውስጥ ይጫኑ።
2. የATX ማዘርቦርድዎን ቀድሞ ከተጫኑት መዘናጋት ጋር ያስተካክሉ።
3. ከተጨማሪ ሳጥኑ ውስጥ ተገቢውን ዊንጮችን በመጠቀም ማዘርቦርዱን ደህንነቱ በተጠበቀ ሁኔታ ያያይዙት።

4.3. የኃይል አቅርቦት ክፍል (PSU) መጫን

1. Slide the PSU into the dedicated compartment at the bottom rear of the case.
2. PSUን ከኋላ በኩል ባሉት ብሎኖች ያስጠብቁት።

4.4. የማከማቻ ድራይቭ መጫኛ

The case supports multiple storage drives. Refer to the accessory box for specific mounting hardware for 2.5" SSDs and 3.5" HDDs.

4.5. የግራፊክስ ካርድ እና የማስፋፊያ ካርድ መጫኛ

1. አስፈላጊውን የ PCIe ማስገቢያ ሽፋኖች ከኋላ በኩል ያስወግዱ.
2. የግራፊክስ ካርድዎን ወይም ሌሎች የማስፋፊያ ካርዶችዎን ወደ ማዘርቦርዱ PCIe ማስገቢያዎች ያስገቡ።
3. ካርዶቹን በዊንችዎች ያስጠብቁ።

ምስል 4.2፡ ውስጣዊ view of the ENDORFY Ventum 200 ARGB case, demonstrating ample space for a motherboard, graphics card, and other components, with pre-installed fans providing airflow.

4.6. የኬብል አስተዳደር

ኬብሎችን ውጤታማ በሆነ መንገድ ለማስተዳደር ከእናትቦርዱ ትሪ ጀርባ ያለውን የኬብል ማስተላለፊያ መቁረጫዎችን እና የማቆሚያ ነጥቦችን ይጠቀሙ። ይህ የአየር ፍሰትን እና ውበትን ያሻሽላል።

4.7. የአየር ማራገቢያ እና የራዲያተር መጫኛ

The Ventum 200 ARGB supports up to 7 fans. Four Stratus 120 PWM ARGB fans are pre-installed. Additional fan and radiator configurations:

• ፊት፡ Up to 3x 120mm or 2x 140mm fans, or up to 360mm radiator.
• ከፍተኛ፡ Up to 2x 120mm or 2x 140mm fans, or up to 240mm radiator.
• የኋላ፡ 1 x 120 ሚሜ አድናቂ።

ምስል 4.3፡ ውስጣዊ view of the case with arrows indicating the various locations for fan installation, highlighting the capacity for up to 7 fans for optimal airflow.

5. Operating the ARGB Lighting

The Ventum 200 ARGB features pre-installed ARGB fans that can be controlled for customized lighting effects.

5.1. ARGB Control

The ARGB lighting can be controlled in two ways:

• Case Controller: Use the dedicated ARGB button on the top I/O panel to cycle through various lighting modes and colors.
• Motherboard ሶፍትዌር፡- Connect the ARGB cable from the case's fan hub to a compatible 3-pin 5V ARGB header on your motherboard. Use your motherboard's RGB software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion) to synchronize and customize lighting effects.

ምስል 5.1፡ Close-up of the top I/O panel of the ENDORFY Ventum 200 ARGB case, showing the power button, reset button, USB 3.0 ports, audio jacks, and the dedicated ARGB control button.

6. ጥገና

Regular maintenance ensures optimal performance and extends the lifespan of your computer components.

6.1. የአቧራ ማጣሪያ ማጽዳት

The Ventum 200 ARGB case is equipped with removable dust filters on the front, top, and bottom. Regularly clean these filters to maintain optimal airflow and prevent dust buildup inside the case.

• Gently pull out the filters.
• Use compressed air or a soft brush to remove accumulated dust.
• Rinse with water if necessary (ensure completely dry before reinstallation).
• Reinstall the filters securely.

ምስል 6.1፡ A close-up detail of the fine mesh front panel, designed to ensure very good airflow while protecting the interior from dust penetration. This mesh is part of the removable filter system.

6.2. አጠቃላይ ጽዳት

ለስላሳ ይጠቀሙ, መamp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For internal cleaning, use compressed air to remove dust from components, ensuring the system is powered off and unplugged.

7. መላ መፈለግ

ይህ ክፍል ሊያጋጥሙዎት የሚችሉ የተለመዱ ጉዳዮችን ይመለከታል።

7.1. ምንም ኃይል የለም

• የ PSU መብራቱን እና ከግድግዳ መውጫው ጋር በትክክል መገናኘቱን ያረጋግጡ።
• Check all power connections to the motherboard, CPU, and graphics card.
• የፊት ፓነል የኃይል ማብሪያ / ማጥፊያ ገመድ ከእናትቦርዱ ራስጌ ጋር በትክክል መገናኘቱን ያረጋግጡ።

7.2. Fans Not Spinning / ARGB Not Lighting Up

• Check that the fans are properly connected to the fan hub or motherboard headers.
• Ensure the fan hub is receiving power (usually via SATA power connector).
• For ARGB, verify the 3-pin 5V ARGB cable is connected to a compatible motherboard header or that the case's ARGB button is being used.

7.3. ከመጠን በላይ የማሞቅ ችግሮች

• ሁሉንም የአቧራ ማጣሪያዎች እና የውስጥ አካላት ያጽዱ።
• የአየር ፍሰትን (የመቀበያ/የጭስ ማውጫ) ለማመቻቸት የአየር ማራገቢያዎቹ በትክክል መተኮሳቸውን ያረጋግጡ።
• የሲፒዩ ማቀዝቀዣ እና የጂፒዩ አድናቂዎች በትክክል እየሰሩ መሆናቸውን ያረጋግጡ።
• የአየር ፍሰት መዘጋትን ለመቀነስ የኬብል አስተዳደርን ያሻሽሉ።

8. ዝርዝሮች

Detailed technical specifications for the ENDORFY Ventum 200 ARGB ATX Computer Case.

ምስል 8.1፡ Diagram illustrating the sleek and spacious design of the ENDORFY Ventum 200 ARGB case, capable of housing all components efficiently while maintaining a compact footprint.

9. ዋስትና እና ድጋፍ

ENDORFY products are designed and manufactured to the highest quality standards. For warranty information and technical support, please refer to the official ENDORFY webጣቢያ ወይም በቀጥታ የደንበኛ አገልግሎታቸውን ያግኙ።

• ኦፊሴላዊ Webጣቢያ፡ www.endorfy.com
• የደንበኛ ድጋፍ፡ Refer to the 'Support' or 'Contact Us' section on the official webለክልላዊ አድራሻ ዝርዝሮች ጣቢያ.

ለዋስትና ጥያቄዎች እባክዎ የግዢ ማረጋገጫዎን ያቆዩ።