IRRADIO Simplified Universal Remote Control with Learning Function

1. መግቢያ

This manual provides detailed instructions for the setup, operation, and maintenance of your IRRADIO Simplified Universal Remote Control. This remote is designed for ease of use, featuring a learning function to replicate commands from your original remote control. Its simplified layout and large buttons make it suitable for users of all ages.

2. ምርት አብቅቷልview

The IRRADIO Simplified Universal Remote Control is an infrared remote with a minimalist design. It features essential buttons for common functions, making it straightforward to operate.

ምስል 2.1፡ ፊት ለፊት view of the IRRADIO Simplified Universal Remote Control. It features large, clearly labeled buttons for power, volume, channel, and two programmable auxiliary buttons (A and B).

የአዝራር ተግባራት፡-

• የኃይል አዝራር (ቀይ): መሣሪያውን ያበራል ወይም ያጠፋል.
• AV Button (Mute): Toggles audio mute or switches AV input (programmable).
• V+/V-: የድምፅ መጠን ይጨምራል ወይም ይቀንሳል.
• P+ / P-: ቻናሎችን ወደላይ ወይም ወደ ታች ይለውጣል።
• A / B Buttons: Two additional programmable buttons for frequently used functions.
• Indicator LED (Red dots): Lights up during button press and programming.

3. ማዋቀር፡ የባትሪ መጫኛ

The remote control requires 2x AAA/LR03 1.5V batteries (not included).

1. የባትሪውን ክፍል ከርቀት መቆጣጠሪያው ጀርባ ያግኙት።
2. ተንሸራታች የባትሪውን ክፍል ሽፋን ይክፈቱ።
3. Insert two AAA/LR03 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
4. የባትሪውን ክፍል ደህንነቱ በተጠበቀ ሁኔታ ይዝጉ።

ማስታወሻ፡- The remote retains programmed memory even after battery replacement.

4. Operating Instructions: Programming the Remote Control

This universal remote uses a learning function to copy signals from your original remote control. You will need a functional original remote for programming.

የፕሮግራም ደረጃዎች፡-

1. አዘገጃጀት፥ Place the IRRADIO universal remote and your original remote control on a flat surface, facing each other, with their infrared emitters aligned at a distance of approximately 1-3 cm.
2. የመማሪያ ሁነታን ያስገቡ ተጭነው ይያዙት። ኃይል አዝራር እና AV button simultaneously on the IRRADIO remote for about 3 seconds. The red indicator LED will light up continuously, indicating the remote is in learning mode.
3. ለፕሮግራም አዝራርን ይምረጡ፡ Press the button on the IRRADIO remote that you wish to program (e.g., V+, P+, A, B). The red indicator LED will start blinking slowly, waiting for a signal.
4. የማስተላለፊያ ምልክት፡ Press and hold the corresponding button on your original remote control (e.g., Volume Up, Channel Up). Keep holding it until the IRRADIO remote's LED blinks rapidly three times and then lights up continuously again. This indicates successful learning.
5. Program More Buttons: Repeat steps 3 and 4 for each button you wish to program.
6. ከመማሪያ ሁነታ ውጣ፦ Once all desired buttons are programmed, press the ኃይል button on the IRRADIO remote to exit learning mode. The red indicator LED will turn off.

ጠቃሚ ማስታወሻዎች፡-

• If the LED does not blink rapidly or turns off during programming, the learning process may have failed. Try again, ensuring proper alignment and battery levels in both remotes.
• Ensure the original remote has sufficient battery power for signal transmission.
• The remote can be reprogrammed infinitely.

5. ጥገና

የባትሪ መተካት፡

When the remote control's response becomes sluggish or the indicator LED does not light up, it is time to replace the batteries. Follow the battery installation steps in Section 3.

ማጽዳት፡

የርቀት መቆጣጠሪያውን ለማጽዳት ለስላሳ እና ደረቅ ጨርቅ ይጠቀሙ። ሻካራ ማጽጃዎችን፣ ሟሟቶችን ወይም እርጥብ ጨርቆችን አይጠቀሙ፣ ምክንያቱም እነዚህ ጨርቆች የገጽታውን ወይም የውስጥ ክፍሎችን ሊጎዱ ይችላሉ።

6. መላ መፈለግ

• የርቀት ምላሽ አለመስጠት፡-
  • ባትሪዎቹ በትክክል ከትክክለኛው ፖላሪቲ ጋር በትክክል መጨመሩን ያረጋግጡ.
  • Replace old batteries with new AAA/LR03 batteries.
  • በርቀት መቆጣጠሪያው እና በመሳሪያው መካከል ምንም እንቅፋቶች አለመኖራቸውን ያረጋግጡ።
• Learning function fails:
  • Ensure the original remote control is working and has sufficient battery power.
  • Verify that the IRRADIO remote and the original remote are aligned correctly, facing each other at a close distance (1-3 cm).
  • Make sure you are pressing and holding the buttons for the required duration during programming.
  • Try programming in a room with less ambient light, as strong light sources can sometimes interfere with IR signals.
• Programmed button does not work:
  • The learning process might not have been successful for that specific button. Repeat the programming steps for that button.
  • Ensure the original remote's signal was strong and clear during programming.

7. ዝርዝሮች

8. ዋስትና እና ድጋፍ

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Irradio webጣቢያ. ለዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።