1. መግቢያ
Thank you for choosing the REPTITRIP Reptile Fogger. This device is designed to provide optimal humidity levels for amphibians, reptiles, and ecological rainforest terrariums. It features constant humidity control, a timer function, and a 4-liter capacity, ensuring a stable and healthy environment for your pets. Please read this manual thoroughly before operation to ensure proper use and maintenance.
Image 1: The REPTITRIP Reptile Fogger, showing the main unit, flexible hose, remote control, and external sensor.
2. የደህንነት መመሪያዎች
- Always unplug the unit from the power outlet before filling, cleaning, or performing any maintenance.
- ዋናውን ክፍል በውሃ ወይም በሌሎች ፈሳሾች ውስጥ አታስቀምጡ.
- የኃይል ገመዱ እንዳይበላሽ እና ሊደናቀፍ ወይም ሊጎተት በማይችልበት ቦታ ላይ መቀመጡን ያረጋግጡ።
- የማዕድን ክምችትን ለመከላከል እና ጥሩ አፈጻጸምን ለማረጋገጥ ንጹህ፣ የተጣራ ወይም የተፈጨ ውሃ ብቻ ይጠቀሙ።
- ልጆች እና የቤት እንስሳት በማይደርሱበት ቦታ ያስቀምጡ.
- የጭጋግ መውጫውን ወይም የአየር ማስገቢያ ቀዳዳዎችን አይዝጉ።
- Operate the unit on a stable, flat surface to prevent tipping.
- If the unit emits unusual sounds, smells, or smoke, unplug it immediately and discontinue use.
3. የጥቅል ይዘቶች
እባክዎን ጥቅሉን ለሚከተሉት ነገሮች ያረጋግጡ፡
- REPTITRIP Reptile Fogger Main Unit (4L water tank)
- Flexible Adjustable Hose
- የርቀት መቆጣጠሪያ
- External Temperature & Humidity Sensor Probe
- የተጠቃሚ መመሪያ (ይህ ሰነድ)
4. የምርት ክፍሎች እና ዲያግራም
Familiarize yourself with the different parts of your REPTITRIP Reptile Fogger.
- የውሃ ማጠራቀሚያ (4 ሊትር አቅም)
- Base Unit with Control Panel (Touch Screen)
- Mist Outlet Nozzle
- ተጣጣፊ የሆስ ማገናኛ
- ውጫዊ ዳሳሽ ወደብ
- የኃይል ገመድ
- የርቀት መቆጣጠሪያ
Image 2: The fogger's display highlighting the two primary operation modes: Time Setting and Humidity Control.
5. ማዋቀር
5.1 ማሸግ እና አቀማመጥ
- ሁሉንም የማሸጊያ እቃዎች ያስወግዱ.
- Place the fogger on a flat, stable surface near the terrarium. Ensure there is enough space around the unit for proper ventilation.
5.2 የውሃ ማጠራቀሚያውን መሙላት
- የውሃ ማጠራቀሚያውን ከመሠረቱ ክፍል ያንሱ።
- በማጠራቀሚያው ታችኛው ክፍል ላይ ያለውን ቆብ ይክፈቱት ፡፡
- Fill the tank with clean, distilled, or demineralized water. Do not exceed the maximum fill line.
- ክዳኑን ደህንነቱ በተጠበቀ ሁኔታ መልሰው ይከርክሙት።
- የተሞላውን የውሃ ማጠራቀሚያ እንደገና ወደ መሰረታዊ ክፍል ያስቀምጡ, በትክክል መቀመጡን ያረጋግጡ.
5.3 Connecting the Hose and Sensor
- Connect one end of the flexible hose to the mist outlet nozzle on the top of the fogger.
- Route the other end of the hose into your terrarium, positioning the mist outlet where desired.
- Plug the external temperature and humidity sensor probe into its designated port on the base unit.
- Place the sensor inside the terrarium, away from the direct mist path, to accurately measure ambient conditions.
5.4 የኃይል ግንኙነት
- Plug the power cord into a standard electrical outlet. The unit will beep, and the display will illuminate.
6. ኦፕሬሽን
6.1 የመቆጣጠሪያ ፓነል እና የርቀት መቆጣጠሪያ
The fogger can be operated via the touch screen control panel on the base unit or the included remote control. Both offer similar functionalities.
- SET/ON/OFF Button: Powers the unit on/off and enters setting modes.
- እሺ አዝራር; Confirms selections in setting modes.
- '+' እና '-' አዝራሮች፡- Adjust values (time, humidity, mist level) and navigate menus.
6.2 የአሠራር ሁነታዎች
The REPTITRIP Fogger offers two main operating modes: የጊዜ ሂደት እና እርጥበት ሁነታ. These modes operate independently.
Image 3: The fogger's versatility for various applications, including terrarium humidification and indoor plant care.
6.2.1 የጊዜ ተግባር
This mode allows you to schedule humidification cycles based on specific intervals and durations.
- የሚለውን ይጫኑ አዘጋጅ button to enter the timing settings.
- የሚለውን ተጠቀም '+' እና '-' አዝራሮችን ለማዘጋጀት ድግግሞሽ (interval between humidification cycles, from 1 hour to 7 days). Press OK ለማረጋገጥ.
- ያቀናብሩ ቆይታ (how long the fogger will mist during each cycle, from 10 seconds to 1 hour). Press OK ለማረጋገጥ.
- The display will show the next humidification time and current humidity.
6.2.2 Humidity Mode (Constant Humidity)
This mode maintains a desired humidity range by automatically turning the fogger on and off based on sensor readings.
- የሚለውን ይጫኑ አዘጋጅ button until the humidity setting appears.
- የሚለውን ተጠቀም '+' እና '-' አዝራሮችን ለማዘጋጀት ዝቅተኛ እርጥበት በመቶኛtagሠ. ይጫኑ OK ለማረጋገጥ.
- ያቀናብሩ ከፍተኛው እርጥበት በመቶኛtagሠ. ይጫኑ OK ለማረጋገጥ.
- The fogger will now automatically activate when humidity drops below the minimum and stop when it reaches the maximum. The current humidity value will be displayed.
Image 4: A graphical representation demonstrating the REPTITRIP fogger's ability to maintain a consistent humidity range.
6.3 Fog Adjustment
The fogger offers three levels of mist output, allowing you to control the rate of humidification.
- In either Timing or Humidity mode, use the '+' እና '-' buttons on the control panel or remote to cycle through the three mist levels.
- Mist levels correspond to approximately 100ml/hr, 200ml/hr, and 300ml/hr water consumption.
Image 5: Visual representation of the three adjustable mist output levels.
6.4 ራስ-ሰር መዝጋት
The REPTITRIP Fogger is equipped with an automatic shut-off feature. When the water level in the tank is too low, an icon will appear on the display, and the atomizer will automatically power down to prevent damage and ensure safety.
7. ጥገና
Regular cleaning is essential for optimal performance and longevity of your fogger.
7.1 Cleaning the Water Tank and Base Unit
- መሳሪያውን ያላቅቁ እና የውሃ ማጠራቀሚያውን ያስወግዱ።
- Empty any remaining water from the tank and the base unit.
- Wipe the inside of the water tank and the base unit (especially the transducer/atomizer disc) with a soft cloth.
- For mineral buildup, use a solution of white vinegar and water (1:1 ratio). Let it soak for 15-20 minutes, then gently scrub with a soft brush and rinse thoroughly.
- እንደገና ከመገጣጠምዎ በፊት ሁሉም ክፍሎች ሙሉ በሙሉ ደረቅ መሆናቸውን ያረጋግጡ።
7.2 Cleaning the Hose and Sensor
- Periodically check the flexible hose for any condensation or debris. Clean with a mild soap and water solution if necessary, and rinse thoroughly.
- Wipe the external sensor probe with a dry, soft cloth. Do not use harsh chemicals or immerse the sensor in water.
8. መላ መፈለግ
If you encounter issues with your REPTITRIP Fogger, please refer to the following common problems and solutions:
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ጭጋግ አይፈጠርም. | Low water level; Unit not powered on; Atomizer disc dirty or damaged. | Refill water tank; Ensure unit is plugged in and powered on; Clean atomizer disc (refer to Maintenance). |
| Display is flashing or unit is beeping. | Low water warning; Sensor error; Internal malfunction. | Check water level and refill if necessary. Ensure sensor is properly connected. If problem persists after refilling and checking sensor, unplug and plug back in. If still flashing/beeping, contact customer support. |
| Humidity levels are not increasing sufficiently. | Mist output too low; Terrarium too large/leaky; Sensor placement. | Increase mist output level; Check terrarium for excessive ventilation; Reposition sensor away from direct mist. |
| White dust around the unit. | Using hard water. | Use only distilled or demineralized water. Clean the unit regularly to remove mineral buildup. |
9. ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| የምርት ስም | እንደገና መመለስ |
| የሞዴል ቁጥር | አርፒ -168 |
| ቀለም | ጥቁር |
| የምርት ልኬቶች | 18.54 x 18.54 x 26.67 ሴ.ሜ |
| የእቃው ክብደት | 1.47 ኪ.ግ |
| አቅም | 4 ሊትር (1.06 ጋሎን) |
| ቁሳቁስ | ፕላስቲክ |
| የሩጫ ጊዜ | Up to 20 hours (on lowest mist setting) |
| ልዩ ባህሪያት | Auto Shut Off, Constant Humidity, Timer Function, Remote Control, Touch Screen, Temperature & Humidity Display |
| Mist Output Levels | 3 (approx. 100/200/300 ml/hr) |
10. ዋስትና እና ድጋፍ
This product typically comes with a limited warranty. Please refer to your purchase documentation for specific warranty terms and duration. For technical support, troubleshooting assistance beyond this manual, or warranty claims, please contact the seller or REPTITRIP customer service through the platform where the product was purchased.
የመመለሻ መመሪያ፡ The standard return policy for this product is 30 days from the date of purchase for refund or replacement.
