Yaheetech Metal Bed Frame 90x200cm - Instruction Manual

መግቢያ

This manual provides detailed instructions for the assembly, usage, maintenance, and troubleshooting of your Yaheetech Metal Bed Frame (Model YA-00130392). Please read these instructions carefully before beginning assembly and retain them for future reference. This bed frame is designed for a 90x200cm mattress and features a robust metal construction with a vintagኢ ውበት.

የደህንነት መረጃ

• Ensure all parts are present and undamaged before beginning assembly. Do not proceed if any parts are missing or damaged.
• Assemble the bed frame on a soft, clean surface (e.g., a carpet or blanket) to prevent scratches to the product or your floor.
• It is recommended that two adults assemble this bed frame for safety and ease.
• Do not fully tighten screws or bolts until all components are loosely assembled and correctly aligned.
• Once assembly is complete, ensure all bolts and screws are securely tightened for stability.
• ከከፍተኛው የክብደት አቅም አይበልጡ 204 ኪግ (450 ፓውንድ).
• በመሰብሰቢያ ጊዜ ትናንሽ ክፍሎችን እና የማሸጊያ ቁሳቁሶችን ከልጆች ያርቁ የመታፈን አደጋዎችን ለመከላከል።

የጥቅል ይዘቶች

እባክዎ ሁሉም የሚከተሉት ክፍሎች በጥቅልዎ ውስጥ መካተታቸውን ያረጋግጡ፡-

• የጭንቅላት ሰሌዳ ክፍሎች
• የእግር ሰሌዳ አካላት
• የጎን ሐዲዶች
• Metal slats (12 pieces)
• Central support legs
• Hardware pack (screws, bolts, washers, Allen key)
• መመሪያ መመሪያ

If any parts are missing or damaged, please contact Yaheetech customer service for assistance.

የማዋቀር እና የመሰብሰቢያ መመሪያዎች

Follow these steps carefully to assemble your bed frame. Refer to the diagrams for visual guidance.

1. ክፍሎችን ይንቀሉ እና ይለዩ፡ ሁሉንም ክፍሎች በጥንቃቄ ይክፈቱ እና ንጹህ እና ለስላሳ በሆነ ቦታ ላይ ያስቀምጧቸው። እያንዳንዱን ክፍል ለመለየት በመመሪያዎ ውስጥ ያለውን የክፍሎች ዝርዝር ይመልከቱ።
2. የጎን ሐዲዶችን ከጭንቅላት ሰሌዳ ጋር ያያይዙ፦ Connect the side rails to the headboard using the provided bolts and Allen key. Insert bolts loosely at this stage.
3. የጎን ሐዲዶችን ከእግር ሰሌዳው ጋር ያያይዙ፦ Connect the other end of the side rails to the footboard. Again, insert bolts loosely.
4. የመሃል ድጋፍ እግሮችን ይጫኑ Attach any central support legs to the main frame as indicated in the diagram.
5. የብረት ንጣፎችን ማስገባት፡ Place the metal slats into the designated slots on the side rails. Ensure they are evenly spaced and securely seated. The built-in design helps prevent mattress sliding.
6. ሁሉንም ማያያዣዎች ማሰር; Once all components are in place and aligned, systematically tighten all bolts and screws firmly. Ensure the frame is stable and level.
7. Attach Protective Foot Caps: Ensure the protective rubber caps are securely fitted to the bottom of all bed legs to prevent floor damage.

Figure 1: Overall dimensions and weight capacity of the bed frame.

Figure 2: Visual guide for installation steps, focusing on pipe connections.

Figure 3: Detail of L-shaped plates reinforcing joints for a stable structure.

Figure 4: Illustration of how built-in slats prevent mattress sliding.

አሠራር እና አጠቃቀም

• የፍራሽ አቀማመጥ; Place your 90x200cm mattress directly onto the metal slats. A box spring is not required.
• Support and Airflow: The 12 sturdy metal slats provide optimal air circulation for your mattress and stable support, contributing to a comfortable sleep.
• የክብደት አቅም; The bed frame is designed to support a maximum weight of 204 kg (450 lbs). Do not exceed this limit to ensure longevity and safety.
• የጆሮ ማዳመጫ መጽናኛ; The high headboard offers comfortable back support for reading or relaxing in bed.
• ከአልጋ በታች ማከማቻ፡ The 32 cm (12.6 inches) ground clearance provides ample space for under-bed storage, helping to keep your room tidy.

Figure 5: Key features including headboard, frame durability, storage, and protective feet.

ጥገና

• ማጽዳት፡ የብረት ፍሬሙን ለስላሳ, መamp ጨርቅ። ሻካራ ማጽጃዎችን፣ ጠጣር ኬሚካሎችን ወይም መሟሟቶችን ከመጠቀም ይቆጠቡ፣ ምክንያቱም እነዚህ ጨርቁን ሊጎዱ ይችላሉ።
• መደበኛ ምርመራዎች; Periodically check all bolts and screws to ensure they remain tight. Retighten if necessary to maintain the bed frame's stability and prevent any potential squeaking.
• ከመጠን በላይ መጫንን ያስወግዱ; Do not place excessive weight on the bed frame beyond its specified capacity to prevent structural damage.

መላ መፈለግ

• የሚንቀጠቀጡ ድምፆች;
  • Check all bolts and screws. Loosen them slightly, adjust the frame to ensure it's level, then retighten firmly.
  • Ensure the bed is placed on a flat, even surface. Uneven floors can cause stress on the frame, leading to noise.
  • Verify that all slats are correctly seated in their designated slots and are not rubbing against each other or the frame.
• አለመረጋጋት ወይም መንቀጥቀጥ;
  • Confirm that all connections are securely tightened.
  • Ensure the bed frame was assembled correctly according to the instructions. Disassemble and reassemble if unsure.
  • Check if the floor is uneven; consider using furniture pads or shims under the legs if needed.
• የፍራሽ መንሸራተት;
  • The bed frame features built-in slats designed to prevent mattress sliding. Ensure your mattress is correctly positioned within the frame and not overhanging.

ዝርዝሮች

ምስል 6: ዝርዝር የምርት ዝርዝሮች.

ዋስትና እና ድጋፍ

For warranty information, technical assistance, or to report missing/damaged parts, please contact Yaheetech customer service directly. Refer to your purchase documentation or the Yaheetech official webበጣም ወቅታዊ የእውቂያ ዝርዝሮች ለማግኘት ጣቢያ.