1. ምርት አብቅቷልview
The Philips DayBrite CFI Linear SDS Selectable Strip is a versatile 2-foot LED luminaire designed for various indoor lighting applications. This fixture offers field-selectable color temperatures (3500K, 4000K, 5000K) and lumen outputs (1200, 1800, 2400 lumens), providing flexibility to meet specific lighting requirements. It features 0-10V dimming capability for precise light level control.
Figure 1: Philips DayBrite CFI Linear SDS Selectable LED Strip Luminaire. This image shows the full length of the white linear LED strip light, featuring a frosted diffuser for even light distribution and a sleek, minimalist design suitable for various indoor installations.
2. የደህንነት መረጃ
Please read all instructions carefully before installation and use. Failure to follow these instructions may result in electric shock, fire, or other hazards. Keep this manual for future reference.
- ማስጠንቀቂያ፡- የኤሌክትሪክ ንዝረት አደጋ. ከመጫንዎ ወይም ከማገልገልዎ በፊት በ fuse ወይም circuit breaker ላይ ያለውን ኃይል ያላቅቁ።
- Installation must be performed by a qualified electrician in accordance with all applicable national and local electrical codes.
- Do not install in wet locations or near flammable materials.
- የአቅርቦትን ጥራዝ ያረጋግጡtage is compatible with the luminaire's requirements (120-277V AC).
- መብራቱን በምንም መልኩ አይቀይሩት።
- Handle with care to avoid damage to LED components.
3. የጥቅል ይዘቶች
ጥቅሉን ሲከፍቱ ሁሉም አካላት መኖራቸውን እና ያልተበላሹ መሆናቸውን ያረጋግጡ፡-
- 1 x Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire
- 1 x Installation Guide (this document)
- Mounting Hardware (e.g., screws, anchors - may vary by package)
4. ማዋቀር እና መጫን
This luminaire is designed for surface mounting. Professional installation is recommended.
- የመጫኛ ቦታን ያዘጋጁ; Ensure the mounting surface is structurally sound and can support the weight of the fixture. Turn off power at the circuit breaker before beginning installation.
- የመጫኛ ነጥቦችን ምልክት ያድርጉ; Use the luminaire as a template to mark the desired mounting locations on the ceiling or wall. Ensure marks are level and spaced correctly for secure attachment.
- የመጫኛ ሃርድዌርን ጫን፡- Drill pilot holes at the marked locations. Insert appropriate anchors if mounting into drywall or plaster. Secure the mounting brackets (if separate) or the luminaire directly using screws.
- የገመድ ግንኙነቶች;
- Connect the AC power supply wires (Line, Neutral, Ground) from the junction box to the corresponding wires on the luminaire. Follow local electrical codes for proper wiring.
- For 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the luminaire to the corresponding wires on your 0-10V dimming control system. Ensure polarity is correct.
- ሁሉንም የሽቦ ግንኙነቶች በተገቢው የሽቦ ፍሬዎች ወይም ማገናኛዎች ይጠብቁ።
- Secure the Luminaire: Once wiring is complete and connections are secure, attach the luminaire firmly to the mounting surface. Ensure no wires are pinched.
- ኃይልን ወደነበረበት መልስ Turn on power at the circuit breaker. Test the luminaire for proper operation and dimming functionality.
5. የአሠራር መመሪያዎች
This luminaire features field-selectable color temperature and lumen output settings.
- የቀለም ሙቀት ምርጫ; Locate the CCT (Correlated Color Temperature) selector switch on the luminaire. This switch allows you to choose between 3500K (Warm White), 4000K (Cool White), and 5000K (Daylight) settings. Ensure power is off before adjusting this switch.
- Lumen Output Selection: Locate the Lumen selector switch on the luminaire. This switch allows you to choose between 1200, 1800, and 2400 lumens. Ensure power is off before adjusting this switch.
- 0-10V መፍዘዝ፡ Once installed and wired to a compatible 0-10V dimmer, the light output can be adjusted smoothly from 100% down to 10% (or lower, depending on dimmer specifications) using the external dimming control.
6. ጥገና
The Philips DayBrite CFI Linear SDS Selectable Strip LED Luminaire requires minimal maintenance.
- ማጽዳት፡ ከማጽዳትዎ በፊት ኃይልን ያላቅቁ. ለስላሳ፣ ደረቅ ወይም ትንሽ ይጠቀሙ መamp cloth to wipe the exterior surface of the luminaire. Do not use abrasive cleaners, solvents, or cleaners containing alcohol, as these may damage the finish or optical components.
- LEDs: The LEDs are integrated and do not require replacement.
7. መላ መፈለግ
If you experience issues with your luminaire, refer to the following common problems and solutions:
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ብርሃኑ አያበራም። | No power supply; Loose wiring; Faulty switch/breaker. | Check power connection, circuit breaker, and wall switch. Verify all wiring connections are secure. |
| Light flickers or dims erratically. | Incompatible dimmer; Loose dimming wires; Power fluctuations. | Ensure 0-10V dimmer is compatible. Check dimming wire connections (purple/gray). Consult an electrician for power supply issues. |
| የተሳሳተ የቀለም ሙቀት ወይም ብሩህነት. | Selector switches set incorrectly. | Turn off power, then adjust the CCT and Lumen selector switches to the desired setting. |
እነዚህን መፍትሄዎች ከሞከሩ በኋላ ችግሩ ከቀጠለ፣ እባክዎ የደንበኛ ድጋፍን ያግኙ።
8. ዝርዝሮች
| ባህሪ | ዝርዝር |
|---|---|
| የምርት ስም | Signify (Philips DayBrite) |
| የሞዴል ቁጥር | SDS21224L8CST-UNV-DIM |
| የብርሃን ምንጭ | የተቀናጀ LED |
| ርዝመት | 24 ኢንች (2 ጫማ) |
| የቀለም ሙቀት | 3500K / 4000K / 5000K (ሊመረጥ የሚችል) |
| የሉመን ውፅዓት | 1200 / 1800 / 2400 Lumens (Selectable) |
| መፍዘዝ | 0-10V መፍዘዝ |
| ግብዓት Voltage | ሁለንተናዊ (UNV) |
| የእቃው ክብደት | 2 ፓውንድ £ |
| ዩፒሲ | 190096131563 |
| ልዩ ባህሪ | Frosted Diffuser |
9. የዋስትና መረጃ
This Philips DayBrite product is covered by a manufacturer's limited warranty. Please refer to the warranty card included with your purchase or visit the official Signify webለዝርዝር የዋስትና ውሎች እና ሁኔታዎች ጣቢያ። ለዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።
10. የደንበኛ ድጋፍ
For technical assistance, product inquiries, or warranty claims, please contact Signify customer support:
- Webጣቢያ፡ Visit the official Signify or Philips Lighting webጣቢያ ለድጋፍ ምንጮች፣ የሚጠየቁ ጥያቄዎች እና የእውቂያ መረጃ።
- ስልክ፡ በምርቱ ማሸጊያ ወይም በአምራቹ ላይ የተሰጡትን የእውቂያ ዝርዝሮች ይመልከቱ webጣቢያ.
When contacting support, please have your product model number (SDS21224L8CST-UNV-DIM) and proof of purchase readily available.
