መግቢያ
The VOLTCRAFT PTM-200 is a highly versatile plug-in thermometer designed for precise temperature measurements across a wide range. It is ideal for use in liquids, gases, and for determining core temperatures in various professional and domestic settings, including quality control, laboratory work, and culinary applications.
This device offers a measurement range from -200 ° ሴ እስከ +200 ° ሴ with a high resolution of 0.1 ° ሴ. Key features include a clear display with white backlight, a robust Pt1000 ዳሳሽ, እና IP65 የውሃ መቋቋም, ensuring durability and reliability. The integrated Max/Min function allows for tracking temperature extremes during a measurement period. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your PTM-200 thermometer.
የጥቅል ይዘቶች
- VOLTCRAFT PTM-200 Thermometer Unit
- Pt1000 Measurement Sensor (3.5 mm diameter)
- 9 ቪ ባትሪ
- መመሪያ መመሪያ
የደህንነት መመሪያዎች
- ለመጀመሪያ ጊዜ ከመጠቀምዎ በፊት ይህንን መመሪያ በደንብ ያንብቡ።
- መሳሪያውን ለረጅም ጊዜ ለከፍተኛ ሙቀት ወይም ቀጥተኛ የፀሐይ ብርሃን አያጋልጡት።
- የባትሪው ክፍል IP65 የውሃ መከላከያን ለመጠበቅ ደህንነቱ በተጠበቀ ሁኔታ መዘጋቱን ያረጋግጡ።
- Handle the sensor probe with care to avoid injury or damage.
- መሣሪያውን ልጆች በማይደርሱበት ቦታ ያስቀምጡት.
- መሣሪያውን ለመቀየር ወይም ለመበተን አይሞክሩ.
ማዋቀር
- የባትሪ ጭነት;
Locate the battery compartment on the back of the thermometer unit. Open the compartment cover. Insert the supplied 9V battery, ensuring correct polarity (+/-). Close the battery compartment cover securely to maintain the device's water resistance.
Image: The VOLTCRAFT PTM-200 thermometer unit, showing the main display, control buttons, the connected Pt1000 sensor probe, and a 9V battery. This illustrates the components included and ready for setup.
- ዳሳሽ ግንኙነት፡-
Connect the Pt1000 measurement sensor cable to the designated port on the top of the thermometer unit. Ensure the connection is firm and secure.
- የመነሻ ኃይል-በ
Press the red power button to turn on the device. The display should illuminate, and a temperature reading will appear.
የአሠራር መመሪያዎች
- ማብራት/ማጥፋት፡
ቀዩን የኃይል ቁልፍ ተጫን (
) to turn the thermometer on. Press and hold the same button for a few seconds to turn it off. - መለኪያዎችን መውሰድ;
Insert the Pt1000 sensor probe into the substance or area where you wish to measure the temperature. Allow a few moments for the reading to stabilize on the display. The white backlight ensures clear visibility in various lighting conditions.
Image: The VOLTCRAFT PTM-200 thermometer with its display showing a temperature reading of 23.4 °C. The Pt1000 sensor is attached and ready for use, demonstrating the device in operation.
- Max/Min Function:
Press the "MAX/MIN" button to cycle through the maximum recorded temperature, minimum recorded temperature, and current temperature. This function is useful for monitoring temperature fluctuations over time.
- የጀርባ ብርሃን መቆጣጠሪያ;
የመብራት አምፖል ቁልፍን ይጫኑ (
) to activate or deactivate the white backlight for the display. - የውሃ መቋቋም (IP65)
The device is rated IP65, meaning it is protected against dust ingress and low-pressure water jets from any direction. This makes it suitable for use in environments where it may be exposed to splashes. However, it is not designed for immersion in water.
ጥገና
- ማጽዳት፡
Wipe the thermometer unit and sensor probe with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the device. Ensure the sensor is clean before and after each use for accurate readings.
- የባትሪ መተካት፡
When the battery warning indicator appears on the display, replace the 9V battery as described in the "Setup" section. Always dispose of used batteries responsibly.
- ማከማቻ፡
Store the thermometer in a dry, cool place, away from direct sunlight and extreme temperatures. Disconnect the sensor probe if storing for extended periods.
መላ መፈለግ
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| መሣሪያ አይበራም | ባትሪው ተሟጧል ወይም በስህተት ተጭኗል። | የባትሪውን ፖላራይት ይፈትሹ ወይም የ9V ባትሪውን ይተኩ። |
| ትክክለኛ ያልሆነ የሙቀት ንባቦች። | Sensor probe is dirty or damaged; improper contact with substance. | Clean the sensor probe. Ensure the probe is fully immersed or making good contact. Check for visible damage to the sensor or cable. |
| ማሳያው ደብዛዛ ወይም ብልጭ ድርግም የሚል ነው። | ዝቅተኛ ባትሪ. | 9 ቮ ባትሪውን ይተኩ ፡፡ |
| "ስህተት" መልእክት በእይታ ላይ። | Sensor error or out of measurement range. | Ensure the sensor is properly connected. Check if the temperature is within the -200 °C to +200 °C range. If the problem persists, the sensor may be faulty. |
እዚህ ያልተዘረዘሩ ችግሮች ካጋጠሙዎት ወይም መፍትሄዎች ችግሩን ካልፈቱት፣ እባክዎ የደንበኞች ድጋፍን ያነጋግሩ።
ዝርዝሮች
| ሞዴል፡ | PTM-200 (VC-12920030) |
| የመለኪያ ክልል፡ | -200 ° ሴ እስከ +200 ° ሴ |
| ጥራት፡ | 0.1 ° ሴ |
| ዳሳሽ ዓይነት፡- | ፕት1000 |
| ማሳያ፡- | LCD ከነጭ የጀርባ ብርሃን ጋር |
| የጥበቃ ክፍል፡ | IP65 (Dust tight and protected against low-pressure water jets) |
| የኃይል አቅርቦት; | 9 ቪ ባትሪ |
| ልኬቶች (L x W x H)፦ | 7.3 x 3 x 12.1 ሴ.ሜ |
| ክብደት፡ | 208.5 ግ |
| አምራች፡ | ቮልትራፍትት |
| መጀመሪያ የሚገኝ፡- | ጥር 25 ቀን 2024 እ.ኤ.አ |
ዋስትና
The VOLTCRAFT PTM-200 thermometer comes with a warranty period of a minimum of 2 አመት from the date of purchase. This warranty covers manufacturing defects and ensures that your product functions as intended under normal use. Please retain your proof of purchase for any warranty claims.
ድጋፍ
For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact your retailer or the VOLTCRAFT customer support. Refer to the contact information provided with your purchase or visit the official VOLTCRAFT webለድጋፍ ዝርዝሮች ጣቢያ.
