SYNCWIRE SW2002 Portable Tire Inflator User Manual

1. የደህንነት መረጃ

Please read all safety instructions carefully before using the SYNCWIRE SW2002 Portable Tire Inflator. Failure to follow these instructions may result in product damage, property damage, or personal injury.

• ልጆች በማይደርሱበት ቦታ ያስቀምጡ.
• Do not operate the inflator continuously for more than 10 minutes. Allow a 10-minute cool-down period between uses to prevent overheating.
• Ensure the correct pressure unit (PSI, KPA, BAR, KG/CM²) is selected for your item before inflation.
• በሚሠራበት ጊዜ አየር ማስገቢያውን ያለ ክትትል አይተዉት.
• Avoid exposing the inflator to rain or moisture.
• Do not attempt to disassemble or modify the device. Contact customer support for assistance.
• የቀረበውን የኃይል መሙያ ገመድ እና መለዋወጫዎችን ብቻ ይጠቀሙ።
• ኢንፍለተሩን ጥቅም ላይ በማይውልበት ጊዜ ቀዝቃዛና ደረቅ ቦታ ያስቀምጡት።

2. የጥቅል ይዘቶች

ሁሉም እቃዎች በጥቅልዎ ውስጥ መኖራቸውን ያረጋግጡ፡-

• 1x SYNCWIRE SW2002 Portable Tire Inflator
• 1 x የአየር ቱቦ
• 1x የዩኤስቢ-ሲ ኃይል መሙያ ገመድ
• 1x የማከማቻ ቦርሳ
• 4x Nozzle Adapters (Ball Needle, Bicycle Valve Nozzle, Air Pillow Nozzle, Swimming Ring Nozzle)
• 4x Car Tire Valve Caps
• 1x የተጠቃሚ መመሪያ (ይህ ሰነድ)
• 1x Warranty Policy

Image: All components included in the SYNCWIRE SW2002 package, laid out neatly.

3. ምርት አብቅቷልview

3.1 ቁልፍ ባህሪያት

• High-Speed Inflation: Inflates tires up to 150 PSI, 2X faster than standard inflators.
• ትልቅ LCD ማሳያ; Ultra-large, clear display shows real-time and preset pressure values, visible day and night.
• Accurate Digital Gauge: High-precision sensor provides readings within ±0.5 PSI.
• ራስ-ሰር መዘጋት የቅድሚያ ግፊት ሲደርስ የዋጋ ግሽበትን በራስ-ሰር ያቆማል።
• በርካታ የዋጋ ግሽበት ሁነታዎች፡- 5 preset modes for Car, Motorcycle, Bike, Ball, and a customizable mode.
• ሁለገብ ክፍሎች፡ Supports PSI, KPA, BAR, and KG/CM².
• አብሮ የተሰራ የ LED የእጅ ባትሪ; Provides illumination for use in low-light conditions.
• የአደጋ ጊዜ ሃይል ባንክ፡ USB output port allows charging of mobile devices.
• የታመቀ እና ተንቀሳቃሽ፡ ለቀላል ማከማቻ እና መጓጓዣ የተነደፈ።

3.2 የመሣሪያ አቀማመጥ

ምስል፡ ፊት ለፊት view of the inflator showing the LCD screen, mode selection, power, and +/- buttons.

• LCD ማሳያ፡- Shows current and target pressure, battery level, and selected mode.
• ሁነታ አዝራር፡- Cycles through inflation modes (Car, Motorcycle, Bike, Ball, Custom).
• የኃይል ቁልፍ፡- መሣሪያውን ያበራል/ያጠፋል እና የዋጋ ግሽበትን ያስጀምራል/ያቆማል።
• +/- አዝራሮች፡- Adjusts preset pressure values.
• ክፍል አዝራር፡- Changes pressure units (PSI, KPA, BAR, KG/CM²).
• የ LED መብራት ቁልፍ; አብሮ የተሰራውን የእጅ ባትሪ ያነቃቃል/ያቦዝናል።
• የአየር ቱቦ ወደብ; Connects the air hose to the inflator.
• የዩኤስቢ-ሲ ግቤት የኢንፍላተር መሙያ።
• የዩኤስቢ-ኤ ውፅዓት ኢንፍሌተርን እንደ ሃይል ባንክ ለመጠቀም።

4. ማዋቀር

4.1 የኢንፍለተሩን መሙላት

1. Connect the supplied USB-C charging cable to the USB-C input port on the inflator.
2. Connect the other end of the cable to a compatible USB power adapter (not included) or a USB port.
3. The battery indicator on the LCD display will flash during charging and become solid when fully charged.
4. A full charge typically takes 2-3 hours from 2 bars to 3 bars. The device cannot be used while charging.

4.2 የአየር ቱቦውን እና ኖዝሉን ማያያዝ

1. Screw the air hose securely into the air hose port on the top of the inflator.
2. Select the appropriate nozzle adapter for the item you wish to inflate.
3. Screw the chosen nozzle adapter onto the free end of the air hose.

5. የአሠራር መመሪያዎች

5.1 ማብራት / ማጥፋት

• ተጭነው ይያዙት። የኃይል አዝራር for 3 seconds to turn the inflator on.
• The LCD display will light up, showing the current battery level and default mode.
• ለማጥፋት፣ ተጭነው ይያዙት እና ይያዙት የኃይል አዝራር for 3 seconds again, or the device will automatically shut off after a period of inactivity.

5.2 Selecting Inflation Mode and Unit

Image: The inflator's LCD screen displaying various preset inflation modes.

1. ካበራህ በኋላ ን ተጫን ሁነታ አዝራር to cycle through the preset inflation modes: Car, Motorcycle, Bike, Ball, and Custom.
2. Each mode has a default pressure range. For example, Car mode is typically 26-50 PSI.
3. የሚለውን ይጫኑ ክፍል አዝራር to switch between pressure units: PSI, KPA, BAR, KG/CM².

5.3 የሚፈለገውን ግፊት ማስተካከል

1. Once a mode is selected, the preset pressure value will flash on the LCD.
2. የሚለውን ተጠቀም + እና - የሚፈለገውን የዒላማ ግፊት ለማስተካከል አዝራሮች።
3. Refer to your vehicle's or item's manufacturer recommendations for correct pressure values.

5.4 የዋጋ ግሽበትን መጀመር እና ማቆም

Image: The inflator actively inflating a car tire, demonstrating its speed.

1. Connect the nozzle adapter to the valve stem of the item you are inflating. Ensure a tight seal.
2. የሚለውን ይጫኑ የኃይል አዝራር to start inflation. The real-time pressure will be displayed.
3. የተቀመጠው ግፊት ሲደርስ ኢንፍላተሩ በራስ-ሰር ይቆማል።
4. To manually stop inflation, press the የኃይል አዝራር እንደገና።
5. Carefully disconnect the nozzle from the valve stem. A small amount of air leakage is normal.

5.5 የ LED የእጅ ባትሪ መጠቀም

• የሚለውን ይጫኑ የ LED መብራት አዝራር የእጅ ባትሪውን ለማብራት.
• Press again to cycle through different light modes (e.g., steady, SOS, flashing).
• Press a third time to turn off the flashlight.

5.6 የኃይል ባንክ ተግባር

Image: The inflator connected via USB to charge a smartphone, highlighting its power bank capability.

• Connect your device's charging cable to the USB-A output port on the inflator.
• The inflator will begin charging your device. This function is useful for emergencies.

6. ጥገና

6.1 ጽዳት

• Ensure the inflator is turned off and disconnected from any power source before cleaning.
• ውጫዊውን ለስላሳ, መamp ጨርቅ. ኃይለኛ ኬሚካሎችን ወይም ሻካራ ማጽጃዎችን አይጠቀሙ.
• Keep the air intake and exhaust vents clear of dust and debris.

6.2 ማከማቻ

• Store the inflator and its accessories in the provided storage bag.
• መሳሪያውን ከፀሀይ ብርሀን እና ከከፍተኛ ሙቀት ርቀው በቀዝቃዛና ደረቅ ቦታ ያስቀምጡት.
• For prolonged storage, charge the inflator every 3-6 months to maintain battery health.

7. መላ መፈለግ

8. ዝርዝሮች

9. ዋስትና እና ድጋፍ

SYNCWIRE provides a የ 36-ወር ዋስትና for the SW2002 Portable Tire Inflator.

For any inquiries or assistance, please contact SYNCWIRE customer service. We are committed to providing fast and friendly support within 24 hours for all your questions and concerns.

Please refer to the included Warranty Policy document for detailed terms and conditions.