ሲንግላርXYZ E1 Lite GNSS RTK የቅየሳ መሳሪያዎች የተጠቃሚ መመሪያ

1. መግቢያ

This user manual provides comprehensive instructions for the setup, operation, and maintenance of your SingularXYZ E1 Lite GNSS RTK Surveying Equipment. Designed for high-precision satellite positioning, this system offers centimeter-level accuracy for various surveying applications. Please read this manual thoroughly before using the equipment to ensure optimal performance and safety.

2. ምን ይካተታል

Upon opening the transport case, verify that all components are present:

• E1 Lite GNSS Receiver (x2)
• Transport Case (x2)
• USB-Type C Cable (x2)
• Super Charger (x2)
• SingularPad Software (x1)
• SC200 Data Collector (x1)
• የዩኤስቢ ገመድ (x1)
• Super Charger (x1)
• ቅንፍ (x1)
• ፈጣን ጅምር መመሪያ (x1)
• Quick Start Card (x1)
• Whip Antenna (x2)
• Tape Measure (x1)
• 20 cm extension rod plugged on tribrach (x1)

Figure 2.1: E1 Lite GNSS RTK Surveying Equipment components.

ምስል 2.2፡ የምርት ማሸጊያ እና ይዘቶች።

ልዩ ማስታወሻ፡- Poles, tripods, and tribrachs are not included with this product and must be acquired separately if needed for your surveying tasks.

3. ማዋቀር እና የመጀመሪያ ግንኙነት

3.1 መሳሪያዎቹን መሙላት

The E1 Lite RTK handheld GPS provides over 20 hours of continuous operation on a single charge. Use the provided Type-C chargers to fully charge both the E1 Lite GNSS Receivers and the SC200 Data Collector before initial use. Fast charging is supported.

3.2 መሣሪያ አብቅቷልview እና በይነገጾች

Familiarize yourself with the device's front panel indicators and various connection interfaces:

Figure 3.1: Front Panel and Interfaces of the E1 Lite GNSS Receiver.

• የፊት ፓነል Satellite Tracking Indicator, Static & Network Indicator, Power Indicator, Function Button.
• በይነገጾች፡ NFC (Touch connection), Bluetooth, USB Type-C (for charging and data download), WiFi, TNC Connector (for UHF Antenna), RS232 Serial Port.

3.3 Connecting Devices via SingularPad Software

The SingularPad software is essential for controlling and configuring your E1 Lite GNSS RTK equipment. Follow these steps to connect your devices:

አጠቃላይ የግንኙነት ደረጃዎች፡

1. Turn on your GNSS device.
2. On the SC200 Data Collector, open the SingularPad software.
3. ሂድ ወደ Device >> Communication መሣሪያዎን ለማገናኘት.
4. For SingularXYZ RTK Receivers (e.g., Y1 GNSS receiver): Select SingularXYZ >> RTK >> Bluetooth. ፈልግ your device's Serial Number (SN) and connect.
5. For GNSS NMEA Devices (other brands): Select Other >> RTK(NMEA0183) >> Bluetooth. Search and connect the device.
6. For SingularXYZ GNSS Tablets (e.g., T8 Pro GNSS tablet): Select Other >> Internal GPS >> Internal GPS and connect the device.
7. After successful connection, you can go to Device >> Device Information ወደ view current device information.

Figure 3.2: Setting up Rover and Base units in SingularPad.

Setting up Rover and Base (for Base + Rover mode):

1. Ensure you have two E1 Lite GNSS receivers. Designate one as the base and the other as the rover.
2. Connect both to your PDA device via Bluetooth.
3. Place both your E1 Lite base and rover in an open view የሰማይ።
4. Connect the whip antenna to both E1 Lite base and rover.
5. Setting up the Base: Connect E1 Lite base to your PDA, go to Device >> Base. ለ Base Startup Mode, you can input known point coordinates or select ነጠላ ነጥብ mode for automatic setup. Set ዳታሊንክ as Internal Radio, and customize radio channels, frequency, and protocol. Save settings and Start Base.
6. Setting up the Rover: Disconnect E1 Lite base and connect to the rover in the software. Go to Device >> Rover, አዘጋጅ የውሂብ አገናኝ as Internal Radio. Match and set the same protocol and frequency as the base setting. Click ስብስብ to save settings and click ያመልክቱ.

4. የአሠራር መመሪያዎች

4.1 የስራ ሁነታዎች

The E1 Lite GNSS RTK system supports two primary working modes:

• Base + Rover Mode: Provides millimeter-level positioning. Compatible with base stations of other brands. Not subject to network and regional restrictions.
• Rover + CORS Mode: Provides centimeter-level positioning. Requires a network signal. CORS account is not included and must be purchased from your local CORS provider.

Figure 4.1: E1 Lite Working Modes.

4.2 Working with CORS/RTK Correction Service

To utilize the CORS/RTK correction service, ensure you have purchased a CORS/RTK Correction Service account in your local area. Your PDA device (phone/tablet/data collector) must have network access and support Bluetooth connection. Place your E1 Lite GNSS receiver in an open view የሰማይ።

1. Open SingularPad software.
2. ጠቅ ያድርጉ "Communication" and connect to your E1 Lite receiver's SN via Bluetooth.
3. ጠቅ ያድርጉ አግኝ to obtain Mount-Point list and select appropriate one. Click ጀምር እና ያመልክቱ.
4. ጠቅ ያድርጉ "Rover". አዘጋጅ የውሂብ አገናኝ as Phone Internet. Then go to የግንኙነት ሁኔታ and fill in your CORS/RTK Correction Service account details.

Figure 4.2: Connecting to CORS/RTK Correction Service.

4.3 Viewing RTK Positioning Status

After completing your E1 Lite RTK setup, check the current RTK solution status in the upper left corner of the SingularPad software:

• የተስተካከለ፡ E1 Lite is receiving corrections stably and obtaining a Fixed RTK solution with centimeter-level accuracy. Typically, E1 Lite achieves a Fixed RTK solution in a few seconds under good environments.
• ተንሳፋፊ፡ E1 Lite receives corrections from the base/CORS, but due to obstructions or magnetic field interference, the signal reception is not very stable and the accuracy is sub-meter level. In tougher conditions, it may take a bit longer to achieve FIXED status.
• ራስ-ሰር Single-point satellite positioning without receiving RTK correction data. The accuracy is around meter-level.

Figure 4.3: RTK Positioning Status Indicators.

ጠቃሚ ምክር፡ Before surveying, make sure E1 Lite has a clear sky, free from obstacles like buildings, trees, cars, and more.

4.4 የላቁ ባህሪያት

• 60° Tilt Surveying: The E1 Lite GNSS Surveying System with IMU initializes in 5 seconds and supports tilt measurements up to 60°, compatible with regular 5/8" thread poles. This allows for surveying in challenging locations without needing perfect vertical alignment.
• 5 Kilometers UHF Range: The radio range between the rover and the base can reach 5 kilometers (3.1 miles). The E1 Lite is compatible with base stations of other brands in both Radio and CORS mode and supports RTCM v3/CMR correction data transmission.
• Robust Signal Tracking: Supports Full-Constellation Tracking (GPS/GLONASS/Galileo/BDS/QZSS/IRNSS/SBAS etc.), allowing for fixed RTK solutions in seconds even in challenging environments like multipath, trees, and city canyons.
• Easy Data Download via Web ዩአይ፡ Access E1's WiFi to conduct static data download, firmware upgrade, and configuration via its web ገጽ.

Figure 4.4: Advanced IMU Tilt Measurement in action.

Figure 4.5: Superior Performance in Challenging Environments.

Figure 4.6: Easy Data Download via Web UI.

5. ጥገና

The E1 Lite GNSS RTK equipment is designed for durability and reliability in harsh environments. It features an IP68 ደረጃ, making it waterproof, dustproof, and shock-resistant.

• በመደበኛነት መሳሪያውን ለስላሳ, መamp ጨርቅ. ገላጭ ማጽጃዎችን ያስወግዱ.
• Ensure all ports (Type-C, TNC) are free from debris and properly sealed when not in use.
• Store the equipment in its transport case when not in use to protect it from physical damage and environmental factors.
• Periodically check cables and connectors for wear and tear. Replace if damaged.

Figure 5.1: E1 Lite's Rugged Design and Battery Life.

6. መላ መፈለግ

If you encounter issues with your E1 Lite GNSS RTK Surveying Equipment, consider the following common points:

• የግንኙነት ጉዳዮች፡- Ensure Bluetooth is enabled on both the data collector and the receiver. Verify that the correct device type and manufacturer are selected in the SingularPad software. Try restarting both devices.
• Poor Accuracy/No Fixed Solution:
  • Ensure the receiver has a clear view of the sky, free from obstructions like buildings, dense trees, or large metal objects.
  • Check the status indicator on the device and in the SingularPad software (refer to Section 4.3).
  • Verify that the base station (if in Base+Rover mode) or CORS service (if in Rover+CORS mode) is active and providing corrections.
  • Confirm that the radio frequency and protocol settings match between the base and rover units.
• የባትሪ ህይወት፡ Ensure devices are fully charged before use. Check the battery indicator in the SingularPad software.
• የሶፍትዌር ጉዳዮች፡- Ensure your SingularPad software is up to date. Refer to the software's help section or online tutorials for specific software-related problems.

For persistent issues or problems not covered here, please contact SingularXYZ customer support for assistance. Refer to the "Support" section for contact details.

7. ዝርዝሮች

Figure 7.1: E1 Lite RTK Key Specifications.

Figure 7.2: Lightweight and Portable Design.

8. ዋስትና

The SingularXYZ E1 Lite GNSS RTK Surveying Equipment comes with a የአንድ ዓመት ዋስትና from the date of purchase. This warranty covers manufacturing defects and ensures the product meets its specified performance standards. Please retain your proof of purchase for warranty claims.

9. ድጋፍ እና መርጃዎች

SingularXYZ is committed to providing excellent customer support. For any inquiries, technical assistance, or service requests, please utilize the following resources:

• 1-On-1 Support Service: Direct technical support is available to assist you with any operational or technical challenges.
• የተጠቃሚ መመሪያ (ፒዲኤፍ)፡- A comprehensive PDF version of the user manual is available for download. ፒዲኤፍ የተጠቃሚ መመሪያን ያውርዱ
• የቪዲዮ ትምህርቶች፡- Access a library of video tutorials to help you get started and master various functions of your equipment.
• የሶፍትዌር ማሻሻያዎች Enjoy permanent free software upgrades and update services for the SingularPad and Post-processing Software.
• FCC Radio License Note: U.S. users must apply for an FCC radio license for commercial use (e.g., surveying, construction) with the UHF function (450–470 MHz). The device is FCC certified, and supporting information can be provided if needed.

For direct contact, please visit the official SingularXYZ webድህረ ገጽ ወይም ከምርት ሰነድዎ ጋር የቀረበውን የእውቂያ መረጃ ይመልከቱ።