ማኑዋሎች+

Beatbot Clarifying Agent Kit for Aquasense pro

Beatbot AquaRefine Kit for AquaSense Pro Robotic Pool Cleaner

ሞዴል፡ Clarifying Agent Kit for Aquasense pro

1. መግቢያ

The Beatbot AquaRefine Kit is a natural and sustainable water clarifying agent designed to work exclusively with the Beatbot AquaSense Pro robotic pool cleaner. This kit efficiently clears cloudy water, removes dirt, oils, and residue, and improves the overall efficiency of your pool's filtration system. It is formulated to be environmentally friendly and safe for various pool types.

Important Note: This clarifying agent kit is specifically designed for use with the Beatbot AquaSense Pro robotic pool cleaner ONLY. It is not compatible with Beatbot Aquasense 2 Ultra, Aquasense 2 Pro, iSkim Ultra Solar Powered Robotic Pool Skimmer, or for standalone pool cleaning.

2. የደህንነት መረጃ

  • ልጆች እና የቤት እንስሳት በማይደርሱበት ቦታ ያስቀምጡ.
  • Avoid direct contact with eyes and skin. In case of contact, rinse thoroughly with water.
  • Do not ingest. If ingested, seek medical attention immediately.
  • ኪቱን ቀዝቃዛና ደረቅ ቦታ ላይ ያስቀምጡት፤ ከፀሐይ ብርሃንና ከፍተኛ የሙቀት መጠን ራቅ ያድርጉት።
  • Dispose of used cartridges according to local regulations.

3. የጥቅል ይዘቶች

Your Beatbot AquaRefine Kit typically includes:

  • Beatbot AquaRefine Clarifying Agent Cartridges (Quantity may vary based on specific kit purchased).
Two Beatbot AquaRefine clarifying agent cartridges

Image: Two Beatbot AquaRefine clarifying agent cartridges, blue in color, shown on a white background.

4. ማዋቀር እና መጫን

Follow these steps to install the AquaRefine Kit into your Beatbot AquaSense Pro robotic pool cleaner:

  1. Open the Robot Cover: Locate and open the top cover of your Beatbot AquaSense Pro robotic pool cleaner.
  2. Remove Existing Kit (if any): If an old clarifying agent kit is present, carefully remove it. Remove the protective cap from the new AquaRefine cartridge.
  3. ካርቶን ያዘጋጁ; Tear off the aluminum film from the interface of the new AquaRefine cartridge.
  4. ካርቶን ይጫኑ; Insert the AquaRefine cartridge into the designated slot within the AquaSense Pro robot. Ensure the interface faces downwards and press firmly until you hear a "click," indicating it is securely in place.
  5. ሽፋኑን ዝጋ; Close the top cover of the AquaSense Pro robot.
Beatbot AquaRefine kit installed in the AquaSense Pro robotic pool cleaner

Image: A Beatbot AquaRefine kit cartridge is shown securely installed within the top compartment of a Beatbot AquaSense Pro robotic pool cleaner.

Diagram showing four steps for installing the Beatbot AquaRefine kit into the robotic cleaner

Image: A four-step diagram illustrating the installation process: 1. Opening the robot cover, 2. Removing the kit cap, 3. Tearing off the film, and 4. Installing the kit into the robot.

5. ኦፕሬሽን

Once the AquaRefine Kit is installed, the Beatbot AquaSense Pro will automatically dispense the clarifying agent during its cleaning cycles.

  1. ጽዳት ይጀምሩ፦ Place your AquaSense Pro robot into the pool and start a cleaning cycle as you normally would.
  2. Automatic Dispersion: The robot will automatically release the clarifying agent into the water as it cleans, ensuring even distribution.
  3. ክትትል፡ You can monitor the usage and remaining life of the clarifying agent through the Beatbot app (if applicable to your AquaSense Pro model).
  4. የሚመከር አጠቃቀም፡- For optimal results, it is generally recommended to use the clarifying agent weekly. A single 300ml kit can last approximately one month with weekly use, cleaning an average of 99,000 gallons of water.
Beatbot AquaSense Pro robot dispensing clarifying agent into a pool

Image: A Beatbot AquaSense Pro robotic pool cleaner is shown submerged in a pool, actively dispensing clarifying agent into the water, creating a visible plume.

6. ጥገና

  • የካርትሪጅ መተካት; Replace the AquaRefine cartridge when it is empty or when indicated by the Beatbot app.
  • Robot Cleaning: Regularly clean your AquaSense Pro robotic pool cleaner, including its filters and brushes, to ensure optimal performance and prevent buildup.
  • ማከማቻ፡ Store unused AquaRefine kits in their original packaging in a cool, dry place.

7. መላ መፈለግ

ችግርሊሆን የሚችል ምክንያትመፍትሄ
Pool water remains cloudy after use.
  • Initial cloudiness (temporary).
  • Insufficient usage frequency.
  • High levels of contaminants.
  • Robot filter is dirty or clogged.
  • Allow a few hours for the clarifier to work and particles to settle/be filtered.
  • Increase usage frequency or duration if pool is heavily contaminated.
  • Ensure the AquaSense Pro's filter is clean before and after use.
  • Check overall pool chemistry.
Clarifier not dispensing.
  • Cartridge not installed correctly.
  • Cartridge is empty.
  • Protective film not removed.
  • Re-install the cartridge, ensuring it clicks into place.
  • በአዲስ ካርቶን ይተኩ.
  • Verify the aluminum film has been completely removed from the cartridge interface.
Kit does not fit my robot.Incorrect robot model.This kit is exclusively for Beatbot AquaSense Pro. Verify your robot model.

8. ዝርዝሮች

  • የምርት ስም፡- Beatbot AquaRefine Kit
  • ሞዴል፡ Clarifying Agent Kit for Aquasense pro
  • ተኳኋኝነት Exclusively with Beatbot AquaSense Pro robotic pool cleaner
  • ቅንብር፡ Natural formula made from recycled crab shells, 100% biodegradable, non-toxic.
  • ውጤታማነት፡- Clears cloudy water, removes dirt, oils, residue, iron, and manganese. Enhances debris filtration.
  • የመዋኛ ገንዳ ተኳኋኝነት Suitable for saltwater, chlorine, in-ground, and above-ground pools. Does not affect pH levels.
  • መበታተን፡ Automatic via AquaSense Pro.
  • Kit Volume: 300ml (typical, may vary)
  • የሚገመተው የህይወት ዘመን፡- Approximately one month with weekly use (for 300ml kit).
  • የእቃው ክብደት፡ 0.99 ኪሎግራም (2.18 ፓውንድ)
  • የምርት መጠኖች: 10 x 6.7 x 4.7 ኢንች
  • አምራች፡ ቢትቦት
  • ዩፒሲ፡ 683125136184
Beatbot AquaRefine kit with people enjoying a pool, highlighting skin and environment-friendly features

Image: The Beatbot AquaRefine kit is shown alongside people enjoying a clean pool, emphasizing its skin and environment-friendly composition from recycled crab shells and its natural, biodegradable, non-toxic properties.

9. ዋስትና እና ድጋፍ

The Beatbot AquaRefine Kit comes with a limited warranty. For specific warranty details, claims, or technical support, please refer to the warranty information provided with your Beatbot AquaSense Pro robotic pool cleaner or contact Beatbot customer service directly.

For further assistance, visit the official Beatbot webጣቢያ ወይም የደንበኛ ድጋፍ ቻናሎቻቸውን ያነጋግሩ።