የፕሮ-ጄክት የመጀመሪያ ጊዜ EVO 2 ኦዲዮፊል ተርንቴብል የተጠቃሚ መመሪያ

1. መግቢያ

Welcome to the world of high-fidelity audio with your new Pro-Ject Debut EVO 2 Audiophile Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. Please read it thoroughly before first use.

The Debut EVO 2 features a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge, designed for exceptional sound reproduction.

2. ማዋቀር

ትክክለኛ ዝግጅት ለተሻለ የድምፅ ጥራት እና በተርንቴብልዎ እና በሪከርዶችዎ ላይ ጉዳት እንዳይደርስ ለመከላከል ወሳኝ ነው።

2.1 ማሸግ እና አቀማመጥ

Carefully remove all components from the packaging. Retain the original packaging for future transport or service. Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and vibrations.

Figure 2.1: Pro-Ject Debut EVO 2 Turntable with dust cover. Ensure the turntable is placed on a stable, level surface.

2.2 የፕላተር እና ቀበቶ መትከል

1. Place the main platter onto the spindle.
2. Locate the drive belt. Carefully stretch the belt around the motor pulley and the sub-platter rim.

ምስል 2.2: መቀራረብ view of the sub-platter and belt drive system. The belt connects the motor pulley to the sub-platter for rotation.

2.3 Tonearm and Cartridge Setup

The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps for tonearm setup:

1. የክብደት ማስተካከያ፡ Gently push the counterweight onto the rear of the tonearm. With the anti-skating weight removed, balance the tonearm so it floats freely and horizontally. Lock the tonearm in its rest.
2. Tracking Force Setting: Rotate the tracking force scale ring to '0' while holding the counterweight steady. Then, rotate the counterweight (and scale ring) counter-clockwise until the desired tracking force (typically 1.8g for the Pick it MM EVO) is indicated.
3. ፀረ-ስኬቲንግ ማስተካከያ፡ Attach the anti-skating weight to the small groove on the anti-skating stub. The recommended setting for the Pick it MM EVO cartridge is the second groove from the tonearm pivot.

Figure 2.3: Detail of the carbon fiber tonearm, showing the counterweight and anti-skating weight. These components are critical for proper cartridge tracking.

Figure 2.4: The pre-mounted Pick it MM EVO cartridge on the tonearm. This cartridge is designed to deliver lively and robust sound.

2.4 ግንኙነቶች

Connect the supplied phono cable to the RCA output jacks on the rear of the turntable and to the phono input (or line input via a phono preamplifier) of your amplifier. Ensure the ground wire is connected to the ground terminal on your amplifier to minimize hum.

Connect the power adapter to the turntable's power input and then to a suitable wall outlet.

Figure 2.5: Rear panel of the turntable with RCA output jacks and ground terminal. Proper connection to an amplifier is essential for audio output.

3. የአሠራር መመሪያዎች

This section details the steps for playing records and using the turntable's features.

3.1 Power On and Speed Selection

Press the power button to turn on the turntable. The Debut EVO 2 features electronic speed selection. Use the speed selector switch (usually located on the plinth) to choose between 33 1/3 RPM, 45 RPM, or 78 RPM (requires a different belt and stylus, sold separately).

3.2 ሪከርድ መጫወት

1. በጠፍጣፋው ላይ መዝገብ ያስቀምጡ.
2. Select the correct playback speed (33 1/3 or 45 RPM).
3. የቃና ክንዱን በማንሳት የቃናውን ማንሻ (cueing lever) ያንሱት።
4. Carefully position the stylus over the lead-in groove of the record.
5. Lower the tonearm gently using the cueing lever. The stylus will descend onto the record and begin playback.

ምስል 3.1፡ ከላይ ወደ ታች view of the turntable during record playback. The tonearm is positioned over the record.

3.3 መልሶ ማጫወትን በማቆም ላይ

1. የቃና ክንዱን በማንሳት የቃናውን ማንሻ (cueing lever) ያንሱት።
2. Return the tonearm to its rest and secure it with the tonearm clip.
3. Turn off the turntable by pressing the power button.

4. ጥገና

Regular maintenance ensures the longevity and optimal performance of your turntable.

4.1 የተርንቴብል ማጽዳት

• የአቧራ ሽፋን; የአቧራ ሽፋኑን ለስላሳ፣ ዲ ያጽዱamp ጨርቅ. ገላጭ ማጽጃዎችን ያስወግዱ.
• Plinth and Platter: Use a soft, lint-free cloth to wipe the plinth and platter. For stubborn marks, a slightly damp ጨርቅ መጠቀም ይቻላል, ከዚያም ደረቅ.
• ስታይለስ Use a dedicated stylus cleaning brush or fluid to gently clean the stylus. Always brush from back to front.

4.2 ቀበቶ መተካት

The drive belt may stretch or degrade over time. If you notice inconsistent speed or reduced performance, the belt may need replacement. Contact Pro-Ject support or an authorized dealer for a replacement belt.

5. መላ መፈለግ

This section addresses common issues you might encounter with your turntable.

6. ዝርዝሮች

Key technical specifications for the Pro-Ject Debut EVO 2 Turntable.

• ሞዴል፡ የመጀመርያው EVO 2
• የሞዴል ቁጥር፡- 9120129864978
• የምርት ስም፡ ፕሮ-ጄክት
• የምርት መጠኖች: 16.4 x 12.6 x 4.5 ኢንች (41.66 x 32.00 x 11.43 ሴሜ)
• የእቃው ክብደት፡ 13.2 ፓውንድ (6 ኪ.ግ)
• የፕላስተር ቁሳቁስ: Damped Aluminum (1.7kg, anti-magnetic)
• ቶንማርም የካርቦን ፋይበር
• ካርቶጅ Pick it MM EVO (pre-mounted)
• ፍጥነት፡ 33 1/3, 45 RPM (78 RPM with optional belt/stylus)
• የግንኙነት ቴክኖሎጂ; Auxiliary (RCA outputs)
• የተካተቱ አካላት፡- Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter.
• ልዩ ባህሪያት፡ Carbon Fiber Tonearm, Damped Aluminum Platter, High-Quality Cartridge, Electronic Speed Selection, 25-Year Spare Parts Guarantee.

7. የዋስትና መረጃ

Pro-Ject Audio Systems offers a 25-year spare parts availability guarantee for this turntable, ensuring long-term support for your product. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject webጣቢያ.

የመከላከያ ዕቅዶችም ለግዢ ይገኛሉ፦

• የ2-አመት ጥበቃ እቅድ
• የ3-አመት ጥበቃ እቅድ
• ሙሉ ጥበቃ (ወርሃዊ እቅድ)

8. ድጋፍ እና ግንኙነት

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webለድጋፍ ሀብቶች ጣቢያ.

እንዲሁም መጎብኘት ይችላሉ የፕሮ-ጄክት መደብር በአማዞን ላይ ለተጨማሪ የምርት መረጃ እና መለዋወጫዎች.