1. ምርት አብቅቷልview
The YESWELDER FLUX-135 MINI is a versatile 135Amp 3-in-1 welding machine designed for various welding tasks. It supports Flux Core Gasless MIG, Stick, and Lift TIG welding processes. This machine is suitable for both beginners and experienced welders due to its intuitive controls and synergic features.
ምስል 1: የፊት view of the YESWELDER FLUX-135 MINI welding machine.
ቁልፍ ባህሪዎች
- ባለብዙ ሂደት አቅም፡ Supports Flux Core Gasless MIG, Stick, and Lift TIG welding.
- የተመሳሳይነት ቁጥጥር፡ የሚመከር ጥራዝ በራስ-ሰር ይዛመዳልtage when adjusting wire feed speed for optimized welding parameters.
- ቀላል አሰራር; Intuitive control panel for straightforward adjustment of welding modes, voltagኢ፣ እና የአሁኑ/የሽቦ መጋቢ ፍጥነት።
- የታመቀ ንድፍ Mini size for portability and convenience.
Figure 2: The 3-in-1 multi-function welding machine illustrating Flux Cored, Lift TIG, and Stick welding capabilities.
2. የደህንነት መረጃ
Welding can be hazardous. Always follow safety precautions to prevent injury or damage. Read and understand all safety warnings and instructions before operating this equipment.
አጠቃላይ የደህንነት ጥንቃቄዎች፡-
- የኤሌክትሪክ ድንጋጤ Can kill. Do not touch live electrical parts. Wear dry welding gloves and protective clothing. Ensure the welding machine is properly grounded.
- ጭስ እና ጋዞች; Can be hazardous to your health. Keep your head out of the fumes. Use ventilation or exhaust to remove fumes from the breathing zone and general area.
- አርክ ጨረሮች፡ ዓይንንና ቆዳን ሊያቃጥል ይችላል። ተገቢ የሆነ የጥላ ማጣሪያ እና መከላከያ ልብስ ያለው የብየዳ የራስ ቁር ይልበሱ።
- እሳት እና ፍንዳታ; Welding sparks and hot metal can cause fires. Keep flammable materials away from the welding area. Have a fire extinguisher nearby.
- ትኩስ ክፍሎች: ከባድ ቃጠሎ ሊያስከትል ይችላል። ከመንካትዎ በፊት መሳሪያዎቹ እንዲቀዘቅዙ ይፍቀዱላቸው።
- ጫጫታ፡- ከመጠን በላይ የሆነ ድምጽ የመስማት ችሎታን ሊጎዳ ይችላል። የጆሮ መከላከያ ይልበሱ።
- የስራ አካባቢ፡ Keep the work area clean, dry, and free from clutter. Ensure adequate lighting.
3. ማዋቀር እና መጫን
3.1 የኃይል ግንኙነት
Connect the welder to a standard 110V AC power outlet. Ensure the power source is capable of providing sufficient current for the welding operations.
3.2 Welding Wire Installation (Flux Core MIG)
- የሽቦ መጋቢ ክፍሉን ይክፈቱ።
- Place a 2LB (4-inch spool diameter) welding wire spool onto the spindle. The FLUX-135 MINI is compatible with .030"/.08mm flux cored wire.
- ሽቦውን በመሪ ቱቦው በኩል እና ወደ ድራይቭ ሮለር ሜካኒዝም ውስጥ ክር ያድርጉት።
- የድራይቭ ሮለር ውጥረት ክንዱን ይዝጉ እና ውጥረቱን በተገቢው መንገድ ያስተካክሉ።
- Feed the wire through the MIG torch liner until it exits the nozzle.
Figure 3: Installation of a 2LB gasless flux cored welding wire spool.
3.3 Electrode/Torch Connections
- MIG ብየዳ The MIG torch is typically pre-connected. Ensure the ground clamp ከስራ ቦታው ጋር ደህንነቱ በተጠበቀ ሁኔታ ተያይዟል።
- Stick Welding: የኤሌክትሮድ መያዣውን ከአዎንታዊ (+) ተርሚናል እና ከመሬት cl ጋር ያገናኙamp to the negative (-) terminal for most common electrodes. Refer to electrode manufacturer specifications.
- ሊፍት TIG ብየዳ፡ An additional Lift TIG torch (not included) is required. Connect the TIG torch to the negative (-) terminal and the ground clamp ወደ አወንታዊ (+) ተርሚናል.
4. የአሠራር መመሪያዎች
4.1 የቁጥጥር ፓነል በላይview
The FLUX-135 MINI features a simple and intuitive control panel. It includes a digital display, mode selection knob, and adjustment knobs for voltage/current and wire feed speed.
ምስል 4: ዝርዝር view of the control panel, highlighting synergic control and efficiency.
4.2 ሁነታ ምርጫ
Use the mode selection knob to choose between Flux MIG, Stick, or Lift TIG welding processes.
4.3 የሲንጀርክ ቁጥጥር እና የፓራሜትር ማስተካከያ
The synergic control feature simplifies parameter setting. When operating in Flux MIG mode, adjusting the wire feed speed knob will automatically suggest the corresponding voltage for optimal welding performance. For Stick and Lift TIG modes, the knobs will adjust current (ampዕድሜ)።
4.4 የብየዳ ሂደቶች
- Flux Core Gasless MIG Welding:
This mode uses flux-cored wire, eliminating the need for external shielding gas. Select Flux MIG mode, set your wire feed speed (voltage will adjust synergically), and begin welding. Ensure proper stick-out and travel speed for best results. - Stick Welding (SMAW):
Select Stick mode. Insert the appropriate electrode into the electrode holder. Adjust the current (amperage) based on the electrode type and material thickness. Maintain a consistent arc length and travel speed. - Lift TIG Welding (GTAW):
Note: Requires an additional Lift TIG torch (not included). Select Lift TIG mode. Connect the TIG torch and ground clamp as described in Section 3.3. Use ER70S-6 mild steel TIG welding rods for fabrication of mild steel. Initiate the arc by gently touching the tungsten electrode to the workpiece and then lifting it slightly. Adjust current (ampእንደ አስፈላጊነቱ)።
Figure 5: YESWELDER ER70S-6 mild steel TIG welding rods.
Figure 6: ER70S-6 TIG welding rods available in 1/16", 3/32", and 1/8" diameters, all 16" long.
Figure 7: An operator performing Lift TIG welding.
5. ጥገና
መደበኛ ጥገና የብየዳ ማሽንዎን ረጅም ዕድሜ እና ጥሩ አፈፃፀም ያረጋግጣል።
5.1 ጽዳት
- የማሽኑን ውጫዊ ክፍል በደረቅና ለስላሳ ጨርቅ በየጊዜው ያጽዱ።
- Use compressed air to blow out dust and debris from the cooling vents. Ensure the machine is unplugged before cleaning.
5.2 የኬብል እና የግንኙነት ምርመራ
- Regularly inspect all welding cables, torch leads, and ground clamps for signs of wear, damage, or loose connections. Replace damaged components immediately.
- ሁሉም የኤሌክትሪክ ግንኙነቶች ጥብቅ እና አስተማማኝ መሆናቸውን ያረጋግጡ.
5.3 Wire Feeder Maintenance (MIG)
- Clean the drive rollers and wire guide tubes to prevent wire feeding issues.
- Check the MIG torch liner for blockages or wear. Replace if necessary.
6. መላ መፈለግ
ይህ ክፍል ሊያጋጥሙህ ለሚችሉ የተለመዱ ጉዳዮች መፍትሄዎችን ይሰጣል።
| ችግር | ሊሆን የሚችል ምክንያት | መፍትሄ |
|---|---|---|
| ዌደር አይበራም | No power from outlet; Power switch off; Circuit breaker tripped | Check power outlet; Turn power switch on; Reset circuit breaker |
| የብየዳ ቅስት የለም | Poor ground connection; Incorrect settings; Damaged cables | የመሬት ክምርን ያረጋግጡamp is secure; Verify mode and parameter settings; Inspect and replace damaged cables |
| የሽቦ መመገቢያ ችግሮች (MIG) | Incorrect drive roller tension; Kinked wire; Clogged liner; Wrong size tip | Adjust drive roller tension; Straighten wire; Clean or replace liner; Use correct contact tip size |
| ደካማ የብየዳ ጥራት | Incorrect parameters; Improper technique; Contaminated material | ጥራዝ ያስተካክሉtage/current and wire speed; Practice welding technique; Clean workpiece thoroughly |
እዚህ ያልተዘረዘሩ ጉዳዮች ካጋጠሙዎት ወይም ችግሩ ከቀጠለ፣ እባክዎ የደንበኛ ድጋፍን ያግኙ።
7. ዝርዝሮች
Technical specifications for the YESWELDER FLUX-135 MINI.
| ባህሪ | ዝርዝር |
|---|---|
| ሞዴል | FLUX-135 MINI |
| ግብዓት Voltage | 110 ቪ |
| ከፍተኛ Ampንዴት | 135Amp |
| የብየዳ ሂደቶች | Flux Core Gasless MIG, Stick, Lift TIG |
| የሽቦ ተኳኋኝነት | 2LB (4" spool) Flux Cored Wire (.030"/.08mm) |
| TIG Rod Compatibility | ER70S-6 Mild Steel TIG Welding Rods |
| ASIN | B0DJVGP23K |
| የመጀመሪያ ቀን ይገኛል። | ጥቅምት 11 ቀን 2024 ዓ.ም |
8. የዋስትና መረጃ
This product is covered by a manufacturer's warranty. Please refer to the warranty card included with your purchase or visit the official YESWELDER webለዝርዝር የዋስትና ውሎች እና ሁኔታዎች ጣቢያ። ለዋስትና ጥያቄዎች የግዢ ማረጋገጫዎን ያስቀምጡ።
9. የደንበኛ ድጋፍ
For technical assistance, spare parts, or any inquiries regarding your YESWELDER FLUX-135 MINI, please contact YESWELDER customer support. You can typically find contact information on the official YESWELDER webጣቢያ ወይም በእርስዎ ቸርቻሪ በኩል.
የመስመር ላይ መርጃዎች፡- ን ይጎብኙ የዬስዌልደር መደብር በአማዞን ላይ ለምርት መረጃ እና ድጋፍ.
